List of Aluminum-Scandium Related Papers

The papers are ordered by author and date

Z. Ahmad and B.J. Abdul-Aleem: Scandium Alloyed Al 5052: A High Performance Material for Marine Environment, Proc. EuroCorr 2000
Z. Ahmad, A. Ul-Hamid and B.J. Abdul-Aleem: The Corrosion Behavior of Scandium Alloyed Al 5052 in Neutral Sodium Chloride Solution, Corros. Sci. 43 (2001) 1227-1243
T. Aiura, N. Sugawara and Y. Miura: The Effect of Scandium on the As-Homogenized Microstructure of 5083 Alloy for Extrusion, Mater. Sci. Eng. A 280 (2000) 139-145
T. Aiura and Y. Miura: The Effect of Scandium on the Microstructure of Al Alloys, Proc. Second International Conference on Processing Materials for Properties, eds. B. Mishra and C. Yamauchi, TMS (2000) 41-44
H. Akamatsu, T. Fujinami, Z. Horita and T.G. Langdon: Influence of Rolling on the Superplastic Behavior of an Al-Mg-Sc Alloy after ECAP, Scripta Mater. 44 (2001) 759-764
A.A. Alalykin, I.I. Novikov, V.K. Portnoy and V.I. Pavlov: Superplastic Flow of Aluminum Alloys in Recrystallized and Unrecrystallized Condition, Proceedings of the Second International Conference on Aluminium Alloys, October 9-13 1990, Beijing, China 403-407
A.A. Alekseev, E.A. Lukina, M.I. Ermolova and L.B. Khokhlatova: Mechanism of d’-Phase Formation in Al-Li and Al-Li-Mg Systems Alloys, Mater. Sci. Forum 396-402 (2002) 989-994
R.A. Altynbaev et al.: Phase Equilibrium in the Al-Ba-Sc System, Russ. Metall. (4) (1987) 194-196
V.N. Ananev, L.B. Ber, V.G. Davydov, V.I. Elagin and A.I. Orozov: Structural Aspects of Instabilities in the Properties of Aluminum – Lithium Alloys Subject to Prolonged Low-Temperature Heating, Russ. J. Non-Ferrous Met. 38 (7) (1997) 54-61
M.M. Antonova and V.B. Chernogorenko: Resistance to Hydrogen of Al-Sc Alloys, Russ. J. Applied Chem. 74 (2001) 396-399
Abstract
A.J. Ardell: Measurement of Solubility Limits from Data on Precipitate Coarsening, Experimental Methods of Phase Diagram Determination, eds. J.E. Morral, R.S. Schiffman and S.M. Merchant, The Minerals, Metals & Materials Society, 1994, 57-66
M. Asta, S.M. Foiles and A.A. Quong: First-Principles Calculations of Bulk and Interfacial Thermodynamic Properties for fcc-based Al-Sc Alloys, Phys. Rev. B 57 (1998) 11265-11275
Abstract
M. Asta, V. Ozolins, and C. Woodward: A First-Principles Approach to Modeling Alloy Phase Equilibria, JOM 53 (9) (2001) 16-19
Abstract
M. Asta and V. Ozolins: Structural, Vibrational and Thermodynamic Properties of Al-Sc Alloys and Intermetallic Compounds, Phys. Rev. B 64 (2001) 094104-1-14
Abstract
E.S. Balmuth: The Status of Al-Li Alloys, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. III, Atlanta, Georgia, USA 82-89
M.K. Banerjee and S. Bandyopadhyay: Development of Mechanically Alloyed AlSiMg-SiC_p Metal Matrix Composites with Trace Scandium Additions, Proc. ACUN-2: International Composites Conference on Composites in the Transportation Industry Feb. 14-18 2000, Sydney, Australia, Vol 2 733-746
C.W. Bartges, S.E. Baumann, R.W. Hyland, Jr., C.L. Jensen, G.P. Tarcy, K.D. Vinnedge and T.C. Skeen: Memory Disk Sheet Stock and Method, US Patent 5 601 934, Feb. 11 1997
Available Online
M.F Bartholomeusz, J.A. Wert: Effect of Dislocation Dissociation on Crack Tip Plasticity in L1₂ Intermetallic Alloys, Acta Metall. Mater. 40 (1992) 673- 682
T.J. Bastow, C.T. Forwood, M.A. Gibson and M.E. Smith: Local Site Symmetry and Electronic Structure of Trialuminide and Related Intermetallic Alloys Probed by Solid-State NMR, Phys. Rev. B 58 (6) (1998) 2988-2997
Abstract
G.I. Batalin, V.S. Sudavtsova and N.N. Mar’yanchik: Thermodynamic Properties of Liquid Binary Alloys of the Al-Sc, Al-V and Al-Ti Systems, Soviet Progress in Chemistry (8) (1985) 35-37
S.F. Baumann, E.L. Colvin, R.W. Hyland, Jr. and J.I. Petit: Aluminum Magnesium Alloy Product Containing Dispersoids, US Patent 5 624 632, Apr. 29 1997
Available Online
Yu.A. Bazin et al.: Possible Reasons for the Modification and Hardening of Aluminium by Scandium (Summary), Sov. Non-Ferrous Met. Res. 12 (1984) 414
Yu.A. Bazin, B.A. Baum: About Mechanism of Alloy Modifying with Soluble Additions, Tsvetnye Metally 35 (7) (1994) 130-136
N.A. Belov and E.S. Naumova: Prospects for the Design of Structural Cast Eutectic Al-Ce-Ni Alloys, Russ. Metall. (6) (1996) 87-90
L.B. Ber and V.G. Davydov: Influence of the Ageing Realization Scheme on the Phase Transformations and Properties of Commercial Aluminium Alloys, Mater. Sci. Forum 396-402 (2002) 983-988
P.B. Berbon, S. Komura, A. Utsunomiya, Z. Horita, M. Furukawa, M. Nemoto and T.G. Langdon: An Evaluation of Superplasticity in Aluminum-Scandium Alloys Processed by Equal-Channel Angular Pressing, Mater. Trans., JIM 40 (1999) 772-778
Abstract
A.L. Berezina et al.: Decomposition Morphology and Kinetics in an Al-Sc Alloy, Phys. Metals 10 (1990) 296-304
A.L. Berezina et al.: The Influence of Scandium on the Kinetics and Morphology of Decomposition of Alloys of the Al-Li System, Phys. Met. Metall. 71 (2) (1991) 167-175
A.L. Berezina, V.A. Mel’nikova, T.A. Monastyrskaya, A.D. Rud’ and K.V. Chuistov: The Effect of Sc on the Stabilization of Metastable Phases during Aging of As-Cast Al-(10-14)%Mg Alloys, Met. Phys. Adv. Tech. 15 (1) (1995) 97-101
A.L. Berezina, K.V. Chuistov, N.I. Kolobnev, L.B. Khokhlatova and T.A. Monastyrskaya: Sc in Aluminum Alloys, Mater. Sci. Forum 396-402 (2002) 741-746
A.L. Berezina, U. Schmidt, T.A. Monastyrskaya, K.V. Chuistov, A.V. Kotko and N.I. Kolobnev: Structural State and Decomposition Kinetics in Rapidly Quenched Al-Sc, Al-Mg-Sc Alloys, Mater. Sci. Forum 396-402 (2002) 763-768
A.L. Beresina, N.I. Kolobnev, K.V. Chuistov, A.V. Kotko and O.A. Molebny: Coherent Composite Phases Formation in Aged Al-Li Base Alloys, Mater. Sci. Forum 396-402 (2002) 977-981
A.S. Berger, R.W. Siegel: Vacancy-Scandium Interaction in Quenched Copper, J. Phys. F 9 (1979) L67-L71
Abstract
A.S. Berger: Determination of the Electrical Resistivity of Scandium in Aluminum, J. Less-Common Met. 71 (1980) 119-126
C. Berthier, M. Minier: Quadrupolar Nuclear Resonance Investigation of Conduction Electrons Charge Density Around a Scandium Impurity in an Aluminium Matrix, J. Phys. F 3 (1973) 1268-1273
Abstract
G. Bester and M. Fähnle: Interpretation of Ab Initio Total Energy Results in a Chemical Language: II. Stability of TiAl₃ and ScAl₃, J. Phys., Condens. Matter 13 (2001) 11551-11565
Abstract
M.J. Birt et al.: The Fracture Resistance of 1420 and 1421 Al-Mg-Li Alloys, Scripta Metall. Mater. 28 (1993) 919-923
N. Blake, M.A. Hopkins: Constitution and Age Hardening of Al-Sc Alloys, J. Mater. Sci. 20 (1985) 2861-2867
J.J. Blandin and W. Beck: Status and Activities of European and International SPF-Groups, Proc. Materials Week 2001 October 1-4 2001, Munich, Germany
Abstract
A.A. Bondarev: Electron Beam Welding of High-Strength Aluminium Alloys, Paton Weld. J. (7) (1999) 50-53
E.L. Bradley, III et al.: Superplastic Properties of an Al-2.4Mg-1.8Li-0.5Sc Alloy, Scripta Metall. Mater. 25 (1991) 717-721
A.G. Bratukhin et al.: Structure and Mechanical Properties of Welded Joints in Aluminium- Lithium Alloys in Welding with Experimental Fillers with Scandium, Paton Weld. J. 5 (1993) 717-721
A.G. Bratukhin et al.: RSR Alloys, Sc-bearing Aluminium Alloys and Aluminium Matrix Composites Applied to Making Aerospace Permanent Joints, Welding in the World 33 (1994) 435
A.G. Bratuhin et al.: Aluminium Casting Alloys for Wrought Welded Assemblies for Aviation Purposes, Welding in the World 33 (1994) 436-439
A.G. Bratukhin et al.: Advanced Cast Aluminium Alloys for Cast and Deformed Welded Structures for Aviation Technology, Weld. Inter. 9 (1995) 897-899
A.G. Bratukhin et al.: Prospects for Using Aluminium-Lithium Alloys for Stamped-Welded Aviation Structures, Weld. Inter. 11 (1997) 70-74
R. Braun, B. Lenczowski and G. Tempus: Effect of Thermal Exposure on the Corrosion Properties of an Al-Mg-Sc Alloy Sheet, Mater. Sci. Forum 331-337 (2000) 1647-1652
I.G. Brodova, O.A. Chikova, I.V. Polents, P.S. Popel’ and V.O. Esin: Effect of Metastable Heterogeneity of Liquid Metallic Solutions on the Structure of Cast Aluminium Alloys, Casting Processes 1 (2) (1992) 158-160
I.G. Brodova et al.: Structural Investigations of Rapidly Crystallized Al-Sc Alloys, Melts 4 (1992) 392-397
I.G. Brodova, D.V. Bashlikov and I.V. Polents: Influence of Heat Time Melt Treatment on the Structure and the Properties of Rapidly Solidified Aluminum Alloys with Transition Metals, Mater. Sci. Forum 269-272 (1998) 589-594
Y.G. Bushuev, V.E. Sylis and E.V. Shulgina: Aluminium and Scandium Alloys: Research and Testing in Space Technology, Russ. Space Bull. 3 (3) (1996) 19-21
G. Cacciamani, P. Riani, G. Borzone, N. Parodi, A. Saccone, R. Ferro, A. Pisch and R. Schmid-Fetzer: Thermodynamic Measurements and Assessment of the Al-Sc System, Intermetallics 7 (1999) 101-108
J.F. Cannon and H. Tracy Hall: Effect of High Pressure on the Crystal Structures of Lanthanide Trialuminides, J. Less-Common Met. 40 (1975) 313-328
Online Article
M.C. Carroll, M.J. Mills, G.S. Daehn, P.I. Gouma, M.F. Savage and B.R. Dunbar: Effects of Minor Sc and Zr Additions on Commercial Al-Mg-Mn Alloys, Automotive Alloys 1999, ed. S. Das, TMS (2000) 239-246
Abstract
S. Celotto and T.J. Bastow: ⁴⁵Sc Nuclear Magnetic Resonance Analysis of Precipitation in Dilute Al-Sc Alloys, Phil. Mag. A 80 (2000) 1111-1125
Abstract
D.J. Chakrabarti et al.: Superplastic Aluminum Products and Alloys, US Patent 5 055 257, Oct. 8 1991
P.P. Chattopadhyay, S. Datta and M.K. Banerjee: On the Formation of V-Phase in Mechanically Alloyed AlSiMg-SiC_p Metal Matrix Composites with Trace Scandium Additions, Mater. Sci. Eng. A333 (2002) 67-71
G.M. Cheldieva et al.: Formation and Decomposition of Metastable Phases in Aluminum Alloys, Russ. Metall. (6) (1990) 87-90
V.V. Cherkasov et al.: Special Features of the Structure Formation and Properties of Castable Al-Mg Alloys Alloyed with Scandium, Met. Sci. & Heat Tr. (6) (1996) 268-270
M.G. Chu and G.J. Hildeman: Aluminum Products Containing Supersaturated Levels of Dispersoids, US Patent 6 004 506, Dec. 21 1999
Available Online
M.G. Chu and G.J. Hildeman: Supersaturated Aluminium Alloy, European Patent EP 1 111 079 A1, June 27 2001
V.N. Chudin: Fabrication of Sheet Radiators by Shaping – Diffusion Bonding – Brazing, Weld. Inter. 11 (1997) 478-480
J.P. Collin: Alliage d’Aluminium à Hautes Teneurs en Scandium et Procédé de Fabrication de cet Alliage, French Patent FR 2 717 827, Sept. 29 1995
Available Online
F. Costello: Fine Grains from Ukraine’s Scandium Stores, Mater. World (9) (2000) 23-24
F.A. Costello, J.D. Robson and P.B. Prangnell: The Effect of Small Scandium Additions to AA7050 on the As-Cast and Homogenized Microstructure, Mater. Sci. Forum 396-402 (2002) 757-762
D. Cousineau, M. Sahoo, P.D. Newcombe, T. Castles and F.A. Fasoyinu: Grain Refinement of Aluminum Alloy 356.0 with Scandium, Zirconium, and a Combination of Titanium and Boron, Proc. AFS 105th Casting Congress, Apr. 28 – May 1 2001, Dallas, Texas, USA 157-184
C.E. Cross and Ø. Grong: Microstructure and Mechanical Properties of Simulated Al-Mg-Zn Weld Metal Modified with Sc and Zr, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 1441-1446
V.G. Davydov et al.: On Prospects of Application of New 01570 High-Strength Weldable Al-Mg-Sc Alloy in Aircraft Industry, Mater. Sci. Forum 217-222 (1996) 1841- 1846
V.G. Davydov et al.: Alloying Aluminum Alloys with Scandium and Zirconium Additives, Met. Sci. & Heat Tr. (8) (1996) 347-352
V.G. Davydov, L.B. Ber, V.N. Ananiev, A.I. Orozov and M.V. Samarina: The Heat Treatment Effect on Thermal Stability of Al-Li Alloys at Low Temperatures, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 985-990
V.G. Davydov, T.D. Rostova, V.V. Zakharov, Yu.A. Filatov and V.I. Yelagin: Scientific Principles of Making an Alloying Addition of Scandium to Aluminium Alloys, Mater. Sci. Eng. A 280 (2000) 30-36
V.G. Davydov, L.B. Ber, E.Ya. Kaputkin, V.I. Komov, O.G. Ukolova and E.A. Lukina: TTP and TTT Diagrams for Quench Sensitivity and Ageing of 1424 Alloy, Mater. Sci. Eng. A 280 (2000) 76-82
V.G. Davydov, J.N. Fridlyander, M.V. Samarina, A.I. Orozov, L.B. Ber, V.I. Yelagin, R. Lang and T. Pfannenmüller: The Heat Treatment of Al-Cu-Li Alloys Ensured the Stability of Structure and Properties at Long Low Temperature Exposure, Mater. Sci. Forum 331-337 (2000) 1049-1054
V.G. Davydov, L.B. Ber and V.I. Komov: The TTT and TTP Diagrams of Commercial Aluminum Alloys Used for Quenching Cooling and Ageing Regimes Optimization, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 219-228
A.M. Diskin et al.: Superplasticity of Alloy of the Al-Cu-Mg System with Additions of Transition Metals (Summary), Sov. Non-Ferrous Met. Res. 14 (1986) 499- 500
G. Dlubek et al.: Positron Annihilation Studies of Decomposition in Al-Li Based Alloys, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 63-68
G. Dlubek, S. Krause, H. Krause, A. L. Beresina, V. S. Mikhalenkov and K. V. Chuistov: Positron Studies of Precipitation Phenomena in Al-Li and in Al-Li-X (X=Cu, Mg or Sc) alloys, J.Phys.: Condens. Matter 4 (1992) 6317-6328
Abstract
S.V. Dobatkin, V.V. Zakharov and R.Z. Valiev: Nanostructures in Al-Based Alloys After Severe Plastic Deformation, Proc. First Joint International Conference on Recrystallization and Grain Growth, Eds. G. Gottstein and D.A. Molodov, August 27-31 2001, Aachen, Germany, Publ. by Springer Verlag, 2001 509-514
S.V. Dobatkin: Grain Refinement and Phase Transformations in Al and Fe Based Alloys During Severe Plastic Deformation, Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 183-192
Abstract
V.I. Dobatkin and G.I. Eskin: Relationships Governing Modification and Nondendritic Solidification of Light Alloys, Casting Processes 1 (1) (1992) 24-28
T.V. Dobatkina et al.: Section of the Isothermal Tetrahedron of the Al-Mg, Li-Sc System in the Aluminum-Rich Region, Russ. Metall. (5) (1992) 125-127
M.S. Domack and D.L. Dicus: Evaluation of Sc-Bearing Aluminum Alloy C557 for Aerospace Applications, Mater. Sci. Forum 396-402 (2002) 839-844
L.M. Dougherty, I.M. Robertson, and J.S. Vetrano: A TEM Study of Dynamic Continuous Recrystallization in a Superplastic Al-4Mg-0.3Sc Alloy Mat. Res. Soc. Symp. Proc. 601 (2000) 25-30
L.M. Dougherty, I.M. Robertson, J.S. Vetrano and S.M. Bruemmer: A Microstructural Study of the Effect of Particle Aging on Dynamic Continuous Recrystallization in Al-4Mg-0.3Sc, Mater. Sci. Forum 357-359 (2001) 93-98
A.M. Drits, B.A. Kopeliovich: Influence of Fine Transition-metal Particles and Grain Structure on Fracture Behavior of Al-Cu-Mg Alloys, Russ. Metall. (4) (1985) 147-151
A.M. Drits, T.V. Krymova: 1460 High-Strength Weldable Aluminum-Lithium Alloy, Russ. J. Non-Ferrous Met. 37 (3) (1996) 65-72
M.E. Drits et al.: Scandium-Aluminium Interactions in the Aluminium-rich Side of the Al-Sc System, Russ. Metall. (4) (1973) 152-154
M.E. Drits et al.: Effect of Alloying on the Strength Characteristics and Weldability of Aluminum Foil, Met. Sci. & Heat Tr. (3) (1979) 215-216
M.E. Drits et al.: Effect of REM on the Mechanical Properties of Aluminum Alloys Containing 6.5% Mg, Met. Sci. & Heat Tr. (10) (1980) 743-745
M.E: Drits et al.: Mechanism of the Influence of Scandium in Increasing the Strength and Thermal Stability of Alloys in the Al-Mg System, Sov. Phys. Dokl. 26 (3) (1981) 344-346
M.E. Drits et al.: Recrystallization of Al-Sc Alloys, Russ. Metall. (1) (1982) 148-152
M.E. Drits et al.: Alloy Al-Sc Age-Hardening Kinetics, Diffusion in Metals and Alloys, August 30-September 3 1982, Tihany, Hungary 616-623
M.E. Drits et al.: Homogenization of Alloys in the System Al-Mg-Sc, Met. Sci. & Heat Tr. (7) (1983) 550-554
M.E. Drits et al.: Metastable State Diagram of the Al-Sc System in the Range Rich in Aluminium, Russ. Metall. (1) (1983) 150-153
M.E. Drits et al.: The Alloying of 01420 Alloy with Scandium, Sov. Non-Ferrous Met. Res. 11 (1983) 248-251
M.E. Drits et al.: The Effect of Solution Treatment on the Ageing Processes of Al-Sc Alloys, Crystal Res. & Technol. 19 (1984) 1325-1330
M.E. Drits et al.: Ageing of Alloy Al-0.3 at.% Sc, Phys. Met. Metall. 57 (6) (1984) 118-126
M.E. Drits et al.: The Effects of Homogenizing Heating on the Properties of Alloys in the Al-Sc and Al-Mg-Sc Systems, Russ. Metall. (3) (1984) 192-195
M.E. Drits et al.: Nature of Physicochemical Interactions in the Aluminum-Rich Corner of the Al-Sc-Mn System, Russ. Metall. (4) (1984) 229-232
M.E. Drits et al.: Some Properties of the Al₃Sc Phase, Sov. Non-Ferrous Met. Res. 12 (1984) 83-85
M.E. Drits et al.: Effect of ScAl₃ Phase Dispersity on Hardening of Al-6.3% Mg-0.21% Sc Alloy, Met. Sci. & Heat Tr. (4) (1985) 309-312
M.E. Drits et al.: Effect of the Degree of Dispersion of ScAl₃ Phase Segregations on the Recrystallisation of Al-Sc Alloys, Sov. Non-Ferrous Met. Res. 13 (1985) 309-314
J.B. Dunlop: Phonon Resistivities of Dilute Transition Metal Compounds, Solid State Comm. 15 (1974) 13-17
J.B. Dunlop, G. Grüner and A.D. Caplin: Dilute Intermetallic Compounds II Properties of Aluminium Rich Aluminium-Transition Metal Phases, J. Phys. F 4 (1974) 2203-2217
Abstract
J. Dutkiewicz et al.: Effect of Scandium on the Decomposition of Aluminium-Zinc Alloys, J. Mater. Sci. 27 (1992) 3032-3035
J. Dutkiewicz et al.: Evolution of Precipitates in AlLiCu and AlLiCuSc Alloys after Age-Hardening Treatment, Mater. Sci. Eng. A234-236 (1997) 253-257
V.I. Elagin et al.: Some Features of Decomposition for the Solid Solution of Scandium in Aluminum, Met. Sci. & Heat Tr. (7) (1983) 546-549
V.I. Elagin et al.: Influence of Scandium on the Structure and Properties of Al-Zn-Mg Alloys, Russ. Metall. (4) (1983) 143-146
V.I. Elagin et al.: Influence of Zirconium Additions on Ageing of Al-Sc Alloys, Phys. Met. Metall. 60 (1) (1985) 88-92
V.I. Elagin et al.: Scandium-alloyed Aluminum Alloys, Met. Sci. & Heat Tr. (1) (1992) 37-45
V.I. Elagin et al.: Some Features of the Cast Structure of Alloys of the Al-Sc System, Met. Sci. & Heat Tr. (6) (1993) 317-319
V.I. Elagin et al.: Effect of Scandium on the Structure and Properties of Alloy Al-5.5Zn- 2.0Mg, Met. Sci. & Heat Tr. (7) (1994) 375-380
R.P. Elliott, F.A. Shunk: The Al-Sc (Aluminum-Scandium) System, Bull. Alloy Phase Diagrams 2 (2) (1981) 222-223
R.A. Emigh et al.: Superplastic Studies in the Al-Li-Sc-Mg System, Superplasticity in Aerospace II, Eds. T.R. McNelley and H.C. Heikkenen, The Minerals, Metals & Materials Society, 1990 303-315
R.A. Emigh, E.L. Bradley and J.W. Morris, Jr.: The Al-Sc-Li-Mg System as a Potential Source of Superplastically Formable Alloys, Light-Weight Alloys for Aerospace Applications II, Eds. E.W. Lee and N.J. Kim, The Minerals, Metals & Materials Society, 1991 27-43
O. Engler and G. Tempus: On the Influence of Scandium on the Recrystallization Behaviour of Al-Mg Alloys, Proceedings of ICOTOM 11, September 16-20 1996, China
V.N. Eremenko et al.: Phase Equilibria in the Scandium-Silicon System, Soviet Powder Met. & Met. Cer. 27 (1989) 967-972
D.G. Eskin: The Effect of Alloying Additives on Structure and Properties of Cast Al-Cu-Si- Mg Alloys, Z. Metallkd. 86 (1995) 60
G.I. Éskin: New Light Alloys and Efficient Technologies for Making Them, Metallurgist 46 (2) (2002) 39-41
F.A. Fasoyinu, M. Sahoo and R.G. Davies: Grain Refinement of Aluminum Alloy 356.0 with Scandium, Zirconium and a Combination of Titanium and Boron, Proc. Light Metals 2000, Eds. J. Kazadi and J. Masounave, August 20-23, 2000, Ottawa, Ontario, Canada 241-271
F.A. Fasoyinu, J. Thomson, D. Cousineau, T. Castles and M. Sahoo: Grain Refinement and Thermal Analysis of Al-Mg Alloy 535, Proc. 6th International AFS Conference on Molten Aluminum Processing, Nov. 11-13 2001, Orlando, Florida, USA
V.A. Fedoseev, V.I. Ryazantsev: Mechanical Properties of Welded Joints in New Deformable Aluminium Alloys, Weld. Inter. 9 (1995) 231-233
M.T. Fernandes and R.C. Dorward: Aluminum-Magnesium-Scandium Alloys with Zinc and Copper, US Patent 6 139 653, Oct. 31 2000
Available Online
Yu.A. Filatov: Weldable Aluminium-Magnesium-Scandium System Base Alloys, Welding in the World 33 (1994) 428-429
Yu.A. Filatov: Deformable Al-Mg-Sc Alloys and Possible Regions of Their Application, J. Adv. Mater. 2 (1995) 386-390
Abstract
Yu.A. Filatov: Deformable Alloys Based on the Al-Mg-Sc System, Met. Sci. & Heat Tr. (6) (1996) 271-274
Yu.A. Filatov: Wrought Alloys of the Al-Mg-Sc System and their Application Prospects in Automobile Manufacturing, Russ. J. Non-Ferrous Met. 38 (2) (1997) 47-49
Yu.A. Filatov, V.I. Yelagin and V.V. Zakharov: New Al-Mg-Sc Alloys, Mater. Sci. Eng. A 280 (2000) 97-101
B.M. Freidin, Yu.V. Kuz’mich, I.G. Kolesnikova, V.I. Serba and S.G. Khayutin: Manufacture of Aluminum-base Compositions by Mechanical Alloying, Russ. J. Non-Ferrous Met. 41 (10) (2000) 57-62
I.N. Fridlyander: Aluminium-Lithium Weldable Alloy 1420 (Alloying System Al-Li-Mg-Zr), Proceedings of the Fifth International Aluminium-Lithium Conference, March 27-31 1989, Williamsburg, Virginia, USA 1359-1364
I.N. Fridlyander, V.S. Sandler and T.I. Nikol’skaya: Dispersoids in Deformed Aluminum Alloys containing Lithium, Met. Sci. & Heat Tr. 32 (6) (1990) 466-468
I.N. Fridlyander et al.: Possibility of Creating Weldable Alloys on the Basis of the System Al-Cu-Li, Met. Sci. & Heat Tr. (9) (1991) 695-699
I.N. Fridlyander et al.: Soviet Al-Li Alloys for Aerospace Application, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch- Partenkirchen, Germany, 35-42
I.N. Fridlyander et al.: The Effect of Scandium on Decomposition Kinetics in Aluminium- Lithium Alloys, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 107-112
I.N. Fridlyander et al.: Structure and Properties of Al-Li Alloys Alloyed with Scandium, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 381-386
I.N. Fridlyander et al.: Fatigue Strength of Al-Cu-Li Alloy at Temperature 293-4 K, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 615-620
I.N. Fridlyander et al.: The Peculiarities of Grain Structure of Aluminium-Lithium Alloys, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 867-871
I.N. Fridlyander et.al.: High-Strength Weldable 1460 Alloy for Cryogenic Application, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 1245-1250
I.N. Fridlyander et al.: Investigation of the Phase Equilibria in Aluminum Alloys Containing Lithium, Met. Sci. & Heat Tr. (10) (1993) 567-571
I.N. Fridlyander et al.: Grain Structure and Superplasticity of High Strength Al-Zn-Mg-Cu Alloys with Different Minor Additions, Mater. Sci. Forum 170-172 (1994) 345-349
J. Fridlyander: Advanced Russian Aluminum Alloys, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. II, Atlanta, Georgia, USA 80-87
J.N. Fridlyander, O.G. Senatorova: Development and Application of High-Strength Al-Zn- Mg-Cu Alloys, Mater. Sci. Forum 217-222 (1996) 1813-1818
J.N. Fridlyander et al.: Alloying Components Optimization of Weldable Al-Li-Mg Alloy, Mater. Sci. Forum 217-222 (1996) 1847-1851
J.N. Fridlyander et al.: Advanced Weldable Damage Tolerant AlMgLi Alloy for Aircraft Application, Mater. Sci. Forum 242 (1997) 249-254
I.N. Fridlyander, L.L. Rokhlin, T.V. Dobatkina, V.V. Kinzhibalo and A.T. Tyvanchuk: Phase Diagram of the Al-Li-Sc System, Russ. Metall. (1) (1998) 161-166
J.N. Fridlyander and W. Bozich: The Properties of Semiproducts of 1460 Alloy (Al-Cu-Li-Sc) and 1421 Alloy (Al-Mg-Li-Sc) at 293K and 77K, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 937-941
J.N. Fridlyander, N.I. Kolobnev, L.B. Khokhlatova, E. Loechelt, P.-J. Winkler and T. Pfannenmuller: Properties of New Al-Li-Mg Alloy, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 2055-2058
J.N. Fridlyander, N.I. Kolobnev, L.B. Khokhlatova, L.V. Tarasenko and I.P. Zhegina: Study of the Structure and Properties of 1420 Alloy Modifications for Sheets, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 2059-2063
J.N. Fridlyander, N.I. Kolobnev, L.B. Khokhlatova, A.L. Berezina, A.V. Katko, A. Haszler and C. Keidel: Texture and Grain Structure of Al-Li-Mg-Zr-Sc Alloy Sheets, Mater. Sci. Forum 331-337 (2000) 867-870
I.N. Fridlyander: Russian Aluminum Alloys for Aerospace and Transport Applications, Mater. Sci. Forum 331-337 (2000) 921-926
J.N. Fridlyander, N.I. Kolobnev, L.B. Khokhlatova, K.-H. Rendigs, G. Tempus, A. Haszler, C. Keidel, T. Pfannenmüller and A.L. Berezina: Structure and Properties of Sheets of 1424 Alloy, Mater. Sci. Forum 331-337 (2000) 1393-1398
I.N. Fridlyander: Aluminum Alloys in Aircraft in the Periods of 1970 – 2000 and 2001 – 2015, Met. Sci. & Heat Tr. 43 (1) (2001) 6-10
J.N. Fridlyander, L.B. Khokhlatova, N.I. Kolobnev, L.B. Ber, E.I. Shvechkov, K.-H. Rendigs and G. Tempus: Development of Thermally Stabilized 1424 Aluminium-Lithium Alloy for Welded Fuselage Applications, Proc. Materials Week 2001 October 1-4 2001, Munich, Germany
Abstract
I.N. Fridlyander, L.B. Khokhlatova, N.I. Kolobnev, K. Rendiks and G. Tempus: Thermally Stable Aluminum-Lithium Alloy 1424 for Application in Welded Fuselage, Met. Sci. & Heat Tr. 44 (1) (2002) 3-8
Abstract
J.N. Fridlyander, L.B. Khokhlatova, N.I. Kolobnev, E.I. Shvechkov, I.P. Zhegina, S.A. Karimova, K.-H. Rendigs and G. Tempus: Influence of Environment and Load Frequency on Fatigue Crack Propagation of 1424 Al-Mg-Li Alloy, Mater. Sci. Forum 396-402 (2002) 1273-1278
A.S. Fridman et al.: Cross Section of Isothermal Tetrahedron of the Al-Mg-Sc-Zr System at 500°C in the Aluminum-rich Region, Russ. Metall. (1) (1992) 207-209
C.L. Fu: Electronic, Elastic and Fracture Properties of Trialuminide Alloys: Al₃Sc and Al₃Ti, J. Mater. Res. 5 (5) (1990) 971-979
Abstract
C.L. Fu and M.H. Yoo: Fundamentals of Mechanical Behavior in Intermetallic Compounds – A Synthesis of Atomistic and Continuum Modelling, Ordered Intermetallics – Physical Metallurgy and Mechanical Behavior, eds. C.T. Liu, R.W. Cahn and G. Sauthoff, 23-28 June 1991, Irsee, Germany 155-164
H. Fujii, M. Sugamata, J. Kaneko and M. Kubota: Effect of Sc Addition on Rapidly Solidified Al-Transition Metal Alloys, Mater. Sci. Forum 396-402 (2002) 245-250
S.-I. Fujikawa et al.: Solid Solubility and Residual Resistivity of Scandium in Aluminum, J. Less-Common Met. 63 (1979) 87-97
S.-I. Fujikawa: Impurity Diffusion of Scandium in Aluminum, Defect and Diffusion Forum 143-147 (1997) 115-120
S.-I. Fujikawa and S. Sakauchi: Kinetics of Precipitation in Al-0.20 mass% Sc Alloys, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 805-810
S.-I. Fujikawa: Scandium in Pure Aluminum and Aluminum Alloys – Its Behavior and Addition Effects, J. Japan Inst. Light Metals 49 (1999) 128-144
T. Fujita, Z. Horita and T.G. Langdon: Diffusion in Fine-Grained Al Alloys Having Low and High Angle Grain Boundaries, Mater. Sci. Forum 396-402 (2002) 1061-1066
K. Fukunaga et al.: Temperature Dependence of Dislocation Dissociation Mode in L1₂ Trialuminides, Mater. Sci. Eng. A 234-236 (1997) 594-597
K. Fukunaga et al.: Temperature Dependence of Dislocation Structure of L1₂-Al₃Sc, Mater. Sci. Eng. A 239-240 (1997) 202-205
K.-I. Fukunaga and Y. Miura: Electron Microscopic Analysis of Dislocation Structures in L1₂-Al₃Sc Intermetallic Compound, J. Japan Inst. Metals 62 (1998) 369-376
C.B. Fuller, D.N. Seidman and D.C. Dunand: Creep Properties of Coarse-Grained Al(Sc) Alloys at 300°C, Scripta Mater. 40 (1999) 691-696
Online Article
M. Furukawa, Z. Horita, M. Nemeto and T.G. Langdon: The Relationship Between Microstructural Stability and Superplasticity in Aluminum Alloys Processed by Equal-Channel Angular Pressing, Proc. Light Metals 1999, Eds. M. Bouchard and A. Faucher, August 22-26, 1999, Quebec City, Quebec, Canada 583-592
M. Furukawa, K. Oh-ishi, S. Komura, A. Yamashita, Z. Horita, M. Nemeto and T.G. Langdon: Optimization of Microstructure for Superplasticity Using Equal-Channel Angular Pressing, Mater. Sci. Forum 304-306 (1999) 97-102
M. Furukawa, A. Utsunomiya, K. Matsubara, Z. Horita and T.G. Langdon: Influence of Magnesium on Grain Refinement and Ductility in a Dilute Al-Sc Alloy, Acta Mater. 49 (2001) 3829-3838
M. Furukawa, A. Utsunomiya, S. Komura, Z. Horita, M. Nemoto and T.G. Langdon: Optimization for Superplasticity in Ultrafine-Grained Al-Mg-Sc Alloys Using Equal-Channel Angular Pressing, Mater. Sci. Forum 357-359 (2001) 431-436
M.Furukawa, Z.Horita and T.G.Langdon: The Principles of Processing Using Severe Plastic Deformation: Applications to Aluminum Alloys, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 47-56
M. Furukawa, Z. Horita and T.G. Langdon: Developing Superplasticity at High Strain Rates Through ECAP Processing, Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 459-468
Abstract
I.N. Ganiev et al.: Anodic Behavior of Alloys in the Systems Aluminum-Scandium(Yttrium, Praseodymium, Neodymium) in a Neutral Medium, J. Applied Chem. USSR 60 (1986) 1961-1965
I.N. Ganiev: High-Temperature and Electrochemical Corrosion of Aluminum-Scandium Alloys, Protection of Metals 31 (1995) 543-546
I.N. Ganiev et al.: Phase Diagram of Al-Zn-Al₂Sc System, Russ. Metall. (3) (1995) 125-127
I.N. Ganiev, M.M. Khakdodov and A.É. Berdiev: Ternary Phase Diagrams of Aluminum with Rare Earth Metals, Met. Sci. & Heat Tr. 44 (2) (2002) 54
Abstract
Y. Gao, W. Wu, G. Feng, S. Xu and X. Ruan: Positron Annihilation Lifetime Analysis of 8090 Alloy with Doping Zn, Ag or Sc under Cryogenic Temperatures, Acta Metall. Sin. 31 (2) (1995) 91-96
S.V. Gavrilin: Evaluation of the Cracking Resistance of Welded Joints in Welding Alloys of the Al-Zn-Mg System Using Experimental Filler Wires, Paton Weld. J. 10 (1998) 202-204
E.P. George, J.A. Horton, W.D. Porter and J.H. Schneibel: Brittle Cleavage of L1₂ Trialuminides, J. Mater. Res. 5 (8) (1990) 1639-1648
Abstract
E.P. George et al.: Deformation and Fracture of L1₂ Trialuminides, ISIJ International 31 (1991) 1063-1075
V.Y. Gertsman, J.S. Vetrano, C.H. Henager,Jr., and S.M. Bruemmer: EBSD Study of Microstructure Evolution in Model Aluminum Alloys During Anealing and High-Temperature Deformation, Proc. First Joint International Conference on Recrystallization and Grain Growth, Eds. G. Gottstein and D.A. Molodov, August 27-31 2001, Aachen, Germany, Publ. by Springer Verlag, 2001 837-842
A. Gholina, S.I. Hulley and P.B. Pragnell: The Development of an Ultra-Fine Isotropic Grain Structure During the Processing of Spray Formed Al-Li-X Alloys, Proceedings of ReX’96, the Third International Conference on Recrystallization and Related Phenomena, October 21 -24 1996, Monterey, California, USA 537-544
A. Gholina and P.B. Pragnell: Cast Microstructure and Dispersoid Formation in Spray Deposited Al-Li Alloys, Mater. Sci. Techn. 15 (1999) 328-336
Abstract
A. Gholina, J. Sarkar, P.J. Withers and P.B. Pragnell: Ultrafine Grain Structures Formed by Thermomechanical Processing of Spray Cast Al-Li Alloys, Mater. Sci. Techn. 15 (1999) 605-615
Abstract
S.V. Golubev et al.: Effect of Viscosity and Electrical Resistance of the Structural State of Al-Sc Melts and the Structure of the Cast Metal, Russ. Met. (1) (1991) 44-49
R. Grimes, R.J. Dashwood and H.M. Flower: High Strain Rate Superplastic Aluminium Alloys: The Way Forward?, Mater. Sci. Forum 357-359 (2001) 357-362
J. Gröbner, R. Schmid-Fetzer, A. Pisch, G. Cacciamani, P. Riani, N. Parodi, G. Borzone, A. Saccone and R. Ferro: Experimental Investigations and Thermodynamic Calculation in the Al-Mg-Sc System, Z. Metallkd. 90 (1999) 872-880
K.A. Gschneider, Jr., F.W. Calderwood: The Al-Sc (Aluminum-Scandium) System, Bull. Alloy Phase Diagrams 10 (1) (1989) 34-36
H.-J. Gudladt, P. Nagy: The Cyclic Crack Propagation Behaviour of a Hardenable Polycrystalline Al-Mg-Sc Alloy, Mater. Sci. Forum 13/14 (1987) 407-412
Y. Harada and D.C. Dunand: Creep Properties of Al₃Sc and Al₃(Sc, X) Intermetallics, Acta Mater. 48 (2000) 3477-3487
E. Hashimoto et al.: Thermomigration of Scandium in Aluminum, Jap. J Appl. Phys. 18 (1979) 881-887
J.B. Hedrick: Rare-Earth Metal Prices in the USA ca. 1960 to 1994, J. Alloys & Compounds 250 (1997) 471-481
A. Heinz, A. Haszler, C. Keidel, S. Moldenhauer, R. Benedictus and W.S. Miller: Recent Development in Aluminium Alloys for Aerospace Applications, Mater. Sci. Eng. A 280 (2000) 102-107
C.H. Henager, Jr., J.S. Vetrano, V.Y. Gertsman and S.M. Bruemmer: Effect of Sn Additions on Superplasticity in Al-Mg-Mn-Sc Alloys, Mat. Res. Soc. Symp. Proc. 601 (2000) 323-328
K. Higashi: Recent Advances and Future Directions in Superplasticity, Mater. Sci. Forum 357-359 (2001) 345-356
K.-I. Hirano: Studies on Age-Hardenable Aluminium Alloys by Atom-Probe Field-Ion Microscope, Bull. Mater. Sci. 12 (1989) 313-323
A. Hoelzl, H. Kaufmann and V. Konkevich: Semi-Solid Casting of Aluminium – Scandium (Zr) Foundry Alloys, Proc. Automotive and Transportation Technology Congress and Exposition (ATTCE 2001), Oct. 2001, Barcelona, Spain, Vol. 4 1-6
Z. Horita, M. Furukawa, K. Oh-ishi, M. Nemoto and T.G. Langdon: Equal-Channel Angular Pressing for Grain Refinement of Metallic Materials, Proc. Fourth International Conference on Recrystallization and Related Phenomena, eds. T. Sakai and H.G. Suzuki, The Japan Institute of Metals, 1999, 301-308
Z. Horita, S. Komura, P.B. Berbon, A. Utsunomiya, M. Furukawa, M. Nemoto and T.G. Langdon: Superplasticity of Ultrafine-Grained Aluminum Alloys Processed by Equal-Channel Angular Pressing, Mater. Sci. Forum 304-306 (1999) 91-96
Z. Horita, M. Furukawa, M. Nemoto, A.J. Barnes and T.G. Langdon: Superplastic Forming at High Strain Rates after Severe Plastic Deformation, Acta Mater. 48 (2000) 3633-3640
Z. Horita, S. Lee, S. Ota, K. Neishi and T.G. Langdon: Equal-Channel Angular Pressing as a Production Tool for Superplastic Materials Mater. Sci. Forum 357-359 (2001) 471-476
Z. Horita, T. Fujinami, K. Sato, S.B. Kang, H.W. Kim and T.G.Langdon: Microstructures and Mechanical Properties of Aluminum Alloys Processed by Equal-Channel Angular Pressing, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 271-275
D.A. Hughes, M.E. Kassner, M.G. Stout and J.S. Vetrano: Metal Forming at the Center of Excellence for the Synthesis and Processing of Advanced Materials, JOM 50 (6) (1998) 16-21
Online Article
K.B. Hyde, A.F. Norman and P.B. Pragnell: The Growth Morphology and Nucleation Mechanism of Primary L1₂ Al₃Sc Particles in Al-Sc Alloys, Mater. Sci. Forum 331-337 (2000) 1013-1018
K.B. Hyde, A.F. Norman and P.B. Pragnell: The Effect of Cooling Rate on the Morphology of Primary Al₃Sc Intermetallic Particles in Al-Sc Alloys, Acta Mater. 49 (2001) 1327-1337
K.B. Hyde, A.F. Norman and P.B. Prangnell: The Effect of Ti on Grain Refinement in Al-Sc Alloys, Mater. Sci. Forum 396-402 (2002) 39-44
R.W. Hyland, Jr., R.C. Stiffler: Determination of the Elastic Constants of Polycrystalline Al₃Sc, Scripta Metall. Mater. 25 (1991) 473-477
R.W. Hyland, Jr.: Homogeneous Nucleation Kinetics of Al₃Sc in a Dilute Al-Sc Alloy, Metall. Trans. A 23A (1992) 1947-1955
R.W. Hyland, Jr., M. Asta, S.M. Foiles and C.L. Rohrer: Al(f.c.c.):Al₃Sc(L1₂) Interphase Boundary Energy Calculations, Acta Mater. 46 (1998) 3667-3678
K. Ihara and Y. Miura: High Temperature Deformation of Al-Mg and Al-Mg-Sc Alloys, Mater. Sci. Forum 396-402 (2002) 1377-1382
A.Z. Ikromov, I.N. Ganiev and V.V. Kinzhibalo: Equilibrium Phase Diagram of Al-Zn-Sc system at 573 and 773K, Dokl. Akad. Nauk Tadzh. SSR (6) (1990) 391-392
R.V. Ilyushenko et al.: Peculiarities of Weakening of Alloy 1420 (Al-Mg-Li System) in Fusion Welding, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 1251-1256
B. Irving: Scandium Places Aluminum Welding on a New Plateau, Weld. J. 76 (7) (1997) 53-57
R.R. Irving: Welded Aircraft: Its Past was Dismal; Its Future is Exciting, Proc. International Symposium on Metal Welding and Applications, Eds. J.P. Boillot and M. Evrard, August 22-26, 1999, Quebec City, Quebec, Canada 3-20
A.Ya. Ishchenko and T.M. Labur: Weldable Scandium-Containing Aluminium Alloys, Welding and Surfacing Reviews 9 (1998) 1-109
A.Ya. Ishchenko and T.M. Labur: Welding Technology and Properties of Welded Joints in Aluminium-Lithium Alloys (Review), Paton Weld. J. 10 (1998) 360-364
A.Ya. Ishchenko and T.M. Labur: Weldable Aluminium Alloys with Scandium (Review), Paton Weld. J. 10 (1998) 389-392
A.Ya. Ishchenko, V.O. Chapor and M.R. Yavorskaya: Effect of Scandium Additions on Weldability of Alloy of Al-Zn-Mg System, Paton Weld. J. (11) (2000) 15-17
Abstract
L.I. Ivanov, V.M. Lazorenko, Yu.M. Platov and V.I. Tovtin: Radiation Stability of Aluminum-Magnesium-Scandium System Alloys, Phys. Chem. Mater. Treatment (6) (1989) 496-497
L.L. Ivanov, V.A. Krasnoselov, Yu.M. Platov, V.I. Tovlin, L.S. Toropova and V.K. Shamardin: Effect of Neutron Irradiation on Mechanical Properties of Low-Activated Aluminium-Based Alloys, Phys. Chem. Mater. Treatment (4) (1990) 321-323
L.I. Ivanov et al.: Radiation Resistance and Parameters of Activation of Aluminium- Magnesium-Scandium and Aluminium-Magnesium-Vanadium Alloys Under Neutron Irradiation, J. Nucl. Mater. 191-194 (1992) 1075-1079
S. Iwamura, M. Nakayama and Y. Miura: Coherency between Al₃Sc Precipitate and the Matrix in Al Alloys Containing Sc, Mater. Sci. Forum 396-402 (2002) 1151-1156
X.J. Jiang et al.: Effects of Minor Additions on Precipitation and Properties of Al-Li-Cu-Mg- Zr Alloy, Scripta Metall. Mater. 29 (1993) 211-216
X.J. Jiang et al.: Effects of Scandium on the Microstructure and Tensile Behavior of Al-Li- Cu-Mg-Zr Alloy, Advances in Cryogenic Engineering (Materials) 40 (1994) 1369-1376
H.-H. Jo, S.-I. Fujikawa: Kinetics of Precipitation in Al-Sc Alloys and Low Temperature Solid Solubility of Scandium in Aluminium studied by Electrical Resistivity Measurements, Mater. Sci. Eng. A171 (1993) 151-161
C.-H. Joh, T. Katsube, K. Yamada and Y. Miura: Effect of Sc-Addition on the Precipitation Behavior of an Al-Li-Mg-Cu Alloy, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 799-804
C.-H. Joh, K. Yamada and Y. Miura: Effect of Sc-Addition on the Coarsening Behavior of Al₃Li Precipitates in Al-Li Alloys, Mater. Trans., JIM 40 (1999) 439-442
Abstract
C.-H. Joh, K. Yamada and Y. Miura: The Effect of Sc on the Formation and Growth of PFZ in Al-Li Alloys, Mater. Sci. Forum 331-337 (2000) 1037-1042
M.J. Jones and F.J. Humphreys: Interaction of Recrystallization and Precipitation in Binary Aluminium-Scandium Alloys, Proc. First Joint International Conference on Recrystallization and Grain Growth, Eds. G. Gottstein and D.A. Molodov, August 27-31 2001, Aachen, Germany, Publ. by Springer Verlag, 2001 1287-1292
R. Kaibyshev, O. Sitdikov and S. Olenyov: Ultrafine Grain Formation During Equal Channel Angular Extrusion in an Al-Mg-Sc Alloy, Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 65-74
Abstract
R. Kaibyshev, F. Musin, K. Saytaeva and Y. Motohashi: Formation of Ultrafine Grains During Intense Plastic Straining in an Al-Li Alloy at 400°C Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 81-87
Abstract
L. I. Kaygorodova, V.P. Domashnikov: Investigation of the Influence of Scandium on the Structure and Properties of an Aluminium-Magnesium Alloy during Natural Ageing, Phys. Met. Metall. 68 (4) (1989) 160-166
L.I. Kaygorodova et al.: The Effect of Small Sc and Mg Addition on Al-Li-Cu-Zr Alloy Structure and Mechanical Properties, Proceedings of the Sixth International Aluminium- Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 363-367
L.I. Kaigorodova et al.: Effects of Small Additions of Scandium and Magnesium on the Structure and Properties of Al-Li-Cu-Zr Alloy upon Natural Aging, Phys. Met. Metall. 73 (3) (1992) 281-285
L.I. Kaigorodova et al.: Effects of Small Additions of Magnesium and Scandium on the Structure and Properties of Al-Li-Cu-Zr Alloy upon Artificial Aging, Phys. Met. Metall. 73 (3) (1992) 286-290
L.I. Kaigorodova: Natural Aging of Aluminum-Magnesium Alloys: Stabilization of Properties, Phys. Met. Metall. 78 (5) (1994) 490-496
L.I. Kaigorodova et al.: Effect of Small Additions of Sc and Zr on the Structure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy, Phys. Met. Metall. 81 (1996) 513-519
Abstract
L.I. Kaigorodova, I.G. Brodova, E.I. Sel’nikhina, and O.R. Shamsheeva: Effect of Small Additions of Sc and Zr on the Fine Structure of an Al-Zn-Mg-Cu Alloy after Rapid Solidification and High-Temperature Annealing, Phys. Met. Metall. 90 (3) (2000) 281-287
Abstract
K.U. Kainer and R. Unal: Powder Metallurgy Processing and Properties of Al-Mg-Sc Alloys, Proc. 1998 Powder Metallurgy World Congress & Exhibition Oct. 18-22 1998, Granada, Spain, 284-288
A.N. Kamardinkin et al.: Isothermal Sections of the Al-Sc-Zr System at 550 and 600°C in the Region Enriched in Aluminum, Russ. Metall. (4) (1991) 216-218
G.M. Khan et al.: Influence of Scandium on Structure and Superplasticity of Al-Zn-Mg-Sc-Zr Alloys, Tsvetnye Metally 34 (11) (1993) 43-45
M.L. Kharakterova, T.V. Dobatkina: Polythermal Sections of the Al-Cu-Sc System, Russ. Metall. (6) (1988) 175-178
M.L. Kharakterova: Phase Composition of Al-Cu-Sc Alloys at Temperatures of 450 and 500°C, Russ. Metall. (4) (1991) 195-199
M.L. Kharakterova et al.: Precipitation Hardening in Ternary Alloys of the Al-Sc-Cu and Al- Sc-Si Systems, Acta Metall. Mater. 42 (7) (1994) 2285-2290
M.L. Kharakterova et al.: Effect of Scandium and Zirconium on Structure and Age Hardening of the Al-Mg-Si Alloys, Russ. Metall. (1) (1997) 104-109
G.V. Kharina and V.P. Kochergin: Corrosion of Alloys of Aluminum with Zinc and Rare Earth Metals in Sodium Metavanadate Solutions, Protection of Metals 32 (1996) 134-136
Abstract
G.V. Kharina and V.P. Kochergin: Corrosion of Aluminum Alloys with Zinc and Rare-Earth Metals in Polyvanadate Solutions, Russ. J. Applied Chem. 69 (1996) 1576-1578
G.V. Kharina, M.V. Kuznetsov and V.P. Kochergin: Mechanism and Kinetics of Anodic Dissolution of Aluminum and its Alloys with Zinc and Rare-Earths in a Sodium Polyvanadate Solution, Russ. J. Electrochem. 34 (1998) 482-485
Abstract
I.M. Khatsinskaya et al.: The Structure and Phase Transformations in Al-Li-Mg Alloys Containing Zr and Sc, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. II, Atlanta, Georgia, USA 183-190
L.B. Khokhlatova et al.: Ageing Behaviour and Tensile Properties of 1460 Alloy, Mater. Sci. Forum 217-222 (1996) 853-857
L.B. Khokhlatova, L.B. Ber, A.A. Alekseev, N.I. Kolobnev, O.G. Ukolova and E.A. Lukina: Phase Transformation during Long-Term Low Temperature Exposure of 1424 Al-Li-Mg Alloy, Mater. Sci. Forum 396-402 (2002) 1395-1398
V.T. Klimov, I.B. Ginko, V.V. Sadkov, V.V. Kashirin and T.V. Krymova: Use of Aluminum-Lithium Alloys in Airplane Structures of the Tupolev Aviation Scientific and Technical Complex, Russ. J. Non-Ferrous Met. 38 (3) (1997) 70-74
U. Koch et al.: Advanced Weldable High-Strength Al-Cu-Li Alloy for Aerospace Applications, Mater. Sci. Forum 242 (1997) 243-248
O.K. Kolerov et al.: Distinctive Features of Primary Crystallization in Alloy 1570, Met. Sci. & Heat Tr. (12) (1994) 649-654
O.K. Kolerov: Kinetics and Texture of Recrystallization in Aluminum Alloy Sheets of Different Thicknesses, Met. Sci. & Heat Tr. (3) (1997) 94-96
N.I. Kolobnev et al.: Superplasticity of Al-Mg-Li System Alloys, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch- Partenkirchen, Germany, 1053-1056
N.I. Kolobnev et al.: Aluminium-Lithium Alloys Based on the Al-Mg-Li-Zr-Sc System, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. II, Atlanta, Georgia, USA 305-312
N.I. Kolobnev and L.B. Khokhlatova: Multy-Step Ageing Behavior of Al-Li Alloys, Proc. Materials Week 2001 October 1-4 2001, Munich, Germany
Abstract
S.B. Komarov: Modification of the Structure of Aluminum-Lithium Alloy Ingots, Russ. J. Non-Ferrous Met. 37 (9) (1996) 59-63
S.B. Komarov: Heredity in Aluminum/Lithium Alloy Ingot Production, Russ. J. Non-Ferrous Met. 40 (9) (1999) 60-62
S. Komura, P.B. Berbon, M. Furukawa, Z. Horita, M. Nemoto and T.G. Langdon: High Strain Rate Superplasticity in an Al-Mg Alloy Containing Scandium, Scripta Mater. 38 (1998) 1851-1856
S. Komura, P.B. Berbon, A. Utsunomiya, M. Furukawa, Z. Horita, M. Nemoto and T.G. Langdon: Superplasticity in an Ultrafine-Grained Al-Mg-Sc Alloy Produced by Equal-Channel Angular Pressing, Hot Deformation of Aluminum Alloys II eds. T.R. Bieler, L.A. Lalli and S.R. MacEwen, TMS, USA 1998 125-138
S. Komura, Z. Horita, M. Furukawa, M. Nemoto and T.G. Langdon: Influence of Scandium on Superplastic Ductilities in an Al-Mg-Sc Alloy, J. Mater. Res. 15 (2000) 2571-2576
Abstract
S. Komura, M. Furukawa, Z. Horita, M. Nemoto and T. G. Langdon: Optimizing the Procedure of Equal-Channel Angular Pressing for Maximum Superplasticity, Mater. Sci. Eng. A 297 (2001) 111-118
S. Komura, Z. Horita, M. Furukawa, M. Nemoto and T.G. Langdon: An Evaluation of the Flow Behavior during High Strain Rate Superplasticity in an Al-Mg-Sc Alloy, Metall. Mater. Trans. A 32A (2001) 707-716
Abstract
V.I. Kononenko, S.V. Golubev: Phase Diagrams of Binary Systems of Aluminum with La, Ce, Pr, Nd, Sm, Eu, Yb, Sc and Y, Russ. Metall. (2) (1990) 193-195
V. Kotroczo, I.J. McColm: Phases in Rapidly Cooled Scandium-Silicon Samples, J. Alloys & Compounds 203 (1994) 259-265
B.Ya. Kotur, I.R. Mokra: Ternary Systems Sc-Y-Si and Sc-Lu-Si, Inorg. Mater. 30 (1994) 729-732
B.Ya. Kotur: Crystal Chemistry of Ternary Intermetallic Compounds of Scandium with Transition Metals and Carbon, Silicon or Germanium, J. Alloys & Compounds 219 (1995) 88-92
L.S. Kramer et al.: Modification of Aluminum Alloys via Scandium Additions, Proceedings of Alumitech ’97, May 19-23 1997, Atlanta, Georgia, USA 1231-1236
L.S. Kramer et al.: Scandium in Aluminum Alloys, Adv. Mater. & Proc. (10) (1997) 23-24
Abstract
A.R. Krause, R.A. Chernenkoff and R.G. Davies: The Effect of Transition Metals on the Fatigue Response of a 5754 Type Alloy, Proc. Light Metals 1999, Eds. M. Bouchard and A. Faucher, August 22-26, 1999, Quebec City, Quebec, Canada 429-438
A.R. Krause and R.A. Chernenkoff: The Effect of Large Zirconium Additions to a 5754 Alloy, Proc. Light Metals 2000, Eds. J. Kazadi and J. Masounave, August 20-23, 2000, Ottawa, Ontario, Canada 285-294
S. Krause et.al.: Positron Studies of Annealing and Precipitation in Quenched Al-Sc(0.003-6 at%) Alloys, Mater. Sci. Forum 105-110 (1992) 1105-1108
S. Krause et al.: Positron Lifetime Studies of Decomposition in Al-Li and Al-Li-(Cu, Mg or Sc) Alloys, Mater. Sci. Forum 105-110 (1992) 1109-1112
S. Krause et al.: Defect Annealing and Decomposition in Quenched Al-Sc Alloys Studied by Positron Lifetime Measurements, Phys. Stat. Sol. (a) 141 (2) (1994) 311-316
T.M. Labur and R.V. Ilyushenko: Effect of the Composition of Filler Wire on the Failure Resistance of Welded Joints in 01421 Aluminium-Lithium Alloy, Paton Weld. J. 4 (1992) 318-320
T.M. Labur and R.V. Ilyushchenko: Effect of Scandium on the Mechanical Properties of Welded Joints in 1420 Aluminium Alloy, Paton Weld. J. 4 (1992) 630-631
T.M. Labur: Examining the Efficiency of Hardening the Weld Metal with Scandium in Welding 1420 Aluminium-Lithium Alloy, Paton Weld. J. 8 (1996) 391-393
L.K. Lamikhov and G.V. Samsonov: Modification of Aluminum and of Alloy AL7 by Transition Metals, Tsvetnye Metally 5 (8) (1964) 77-80
T.G. Langdon, M. Furukawa, M. Nemoto and Z. Horita: Using Severe Plastic Deformation for Grain Refinement and Superplasticity Mater. Sci. Forum 357-359 (2001) 489-498
P.Sh. Lantsman et al.: Effect of Alloying with Rare Earth Metals on the Recrystallization Temperature and Properties of Aluminum and an Alloy of the System Al-Cu-Mn, Met. Sci. & Heat Tr. (4) (1990) 285-288
S. Lee, A. Utsunomiya, H. Akamatsu, K. Neishi, M. Furukawa, Z. Horita and T.G. Langdon: Influence of Scandium and Zirconium on Grain Stability and Superplastic Ductilities in Ultrafine-Grained Al-Mg Alloys, Acta Mater. 50 (2002) 553-564
B. Lenczowski et al.: Neue Aluminiumlegierungen für die Luftfahrt, Aluminium 73 (1997) 200-20
B. Lenczowski, R. Rauh, D. Wieser, G. Tempus, G. Fischer, J. Becker, K, Folkers, R. Braun and G. Lütjering: Weldable AlMgSc Alloys for Transportation Technology, Aluminium 76 (2000) 350-356
B. Lenczowski, T. Hack, D. Wieser, G. Tempus, G. Fischer, J. Becker, K. Folkers, R. Braun and G. Lütjering: AlMgSc Alloys for Transportation Technology, Mater. Sci. Forum 331-337 (2000) 957-963
B. Lenczowski, V. Yelagin, R. Rauh, V. Zakharov and Y. Filatov: Novel Weldable Anti-Corrosive Aluminium-Magnesium Alloy Containing a High Amount of Magnesium, Especially for Use in Automobiles, World Patent WO 0011231, March 11 2000
Available Online
B. Lenczowski, R. Rauh, D. Wieser and G. Tempus: Weldable, Corrosion-Resistant AlMg Alloys, Especially for Manufacturing Means of Transportation, US Patent 6 258 318, July 10 2001
Available Online
B. Lenczowski, V. Yelagin, R. Rauh, V. Zakharov and Y. Filatov: Weldable Anti-Corrosive Aluminum-Magnesium Alloy Containing a High Amount of Magnesium, Especially for Use in Automobiles, US Patent 6 315 948, Nov. 13 2001
Available Online
B. Lenczowski: Neue Leichtmetalle im Flugzeugbau, Proc. Materials Week 2001 October 1-4 2001, Munich, Germany
Abstract
B. Lenczowski, V. Yelagin, R. Rauh, V. Zakharov and Y. Filatov: Weldable Anti-Corrosive Aluminium-Magnesium Alloy Containing a High Amount of Magnesium, Especially for Use in Aviation, World Patent WO 0011232, March 2 2002
Available Online
H.A. Lipsitt and A.M. Sherman: Light-Weight Aluminum Alloy Design Methodology, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 385-389
H.A. Lipsitt and A.M. Sherman: Lightweight Aluminum Alloy Design Methodology, Adv. Mater. & Proc. (10) (2001) 37-39
Abstract
V.V. Litovskii et al.: The Enthalpies of Formation of Liquid Aluminium-Scandium Alloys, Russ. J. Phys. Chem. 60 (9) (1986) 1385-1386
J. Liu, D.J. Chakrabarti: Grain Structure and Microtexture Evolution During Superplastic Forming of a High Strength Al-Zn-Mg-Cu Alloy, Acta Mater. 44 (1996) 4647-4661
J. Liu and F.H. (Sam) Froes: Aluminum Alloys for Aerospace Applications: A Review, Proc. Synthesis of Lightweight Metals III, eds. F.H. Froes, C.M. Ward-Close, P.G. McCormick and D. Eliezer, TMS (1999) 103-111
J. Liu and M. Kulak: A New Paradigm in the Design of Aluminum Alloys for Aerospace Applications, Mater. Sci. Forum 331-337 (2000) 127-140
V.I. Lukin: Effect of Alloying Elements Sc, Mn and Zr on Weldability of Alloys of the Al-Mg-Sc-Mn-Zr System, Weld. Inter. 10 (1996) 987-989
V.I. Lukin et al.: Examination of the Weldability of Superlight Al-Mg-Li alloys, Weld. Inter. 11 (1997) 488-492
N.A. Makhmudova et al.: Effect of Alloying with Scandium on the Weldability of Al-6%Mg Alloy, Paton Weld. J. 3 (1991) 688-690
T.I. Malinkina, N.A. Markachev, V.A. Kovtun and N.M. Bukhanova: Welded Structures of 01570 Aluminium Alloy, Weld. Inter. 12 (1998) 566-569
M.V. Markushev and M.Yu. Murashkin: Strength of Submicrocrystalline Severly Deformed Commercial Aluminum Alloys, Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 371-380
Abstract
E.A. Marquis and D.N. Seidman: Nanoscale Structural Evolution of Al₃Sc Precipitates in Al(Sc) Alloys, Acta Mater. 49 (2001) 1909-1919
Online Article
E.A. Marquis, D.N. Seidman and D.C. Dunand: Creep of Precipitation-Strengthened Al(Sc) Alloys, Creep Deformation: Fundamentals and Applications, eds. R.S. Mishra, J.C. Earthman and S.V. Raj, 2002 TMS Annual Meeting, Seattle, Washington, Feb. 17-21 2002, 299-308
Abstract
L.F. Martynova et al.: Knight Shift in Certain Scandium Compounds, Phys. Met. Metall. 37 (1974) 169-170
L. Meng, X.L. Zheng: Overview of the Effects of Impurities and Rare Earth Elements in Al-Li Alloys, Mater. Sci. Eng. A237 (1997) 109-118
W.S. Miller, P.C.M. de Haan, A. Haszler, A. Heinz, C. Keidel and H. Ghaziary: High Performance Material for Aerospace Applications, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 1985-1990
Yu.V. Milman, D.V. Lotsko and O.I. Sirko: ‘Sc Effect’ of Improving Mechanical Properties in Aluminium Alloys, Mater. Sci. Forum 331-337 (2000) 1107-1111
Yu.V. Milman, D.V. Lotsko, O.D. Neikov, A.I. Sirko, N.A. Yefimov, A.N. Bilous, D.B. Miracle and O.N. Senkov: Processing, Structure and Mechanical Behavior of Rapidly Solidified Aluminum Alloys Containing Quasicrystalline Particles, Mater. Sci. Forum 396-402 (2002) 723-728
Y.V. Milman, A.I. Sirko, D.V. Lotsko, O.N. Senkov and D.B. Miracle: Microstructure and Mechanical Properties of Cast and Wrought Al-Zn-Mg-Cu Alloys Modified with Zr and Sc, Mater. Sci. Forum 396-402 (2002) 1217-1222
Y. Miura et al.: Yield Strength of an Al-Sc Alloy Containing Coherent Al₃Sc Precipitates, Aspects of High Temperature Deformation and Fracture in Crystalline Materials, July 28-31 1993, Nagoya, Japan, 255-262
Y. Miura et al.: Precipitation Hardening in an Al-2.4Li- 0.19Sc Alloy, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. II, Atlanta, Georgia, USA 161-168
Y. Miura et al.: Recrystallization of Al-3Mg and Al-3Mg-0.2Sc Alloys, Mater. Sci. Forum 217-222 (1996) 505-510
Y. Miura, C.-H. Joh and T. Katsube: Determination of Vacancy-Sc Interacion Energy by Electrical Resistivity Measurements, Mater. Sci. Forum 331-337 (2000) 1031-1035
Y. Miyake and T. Suganuma: Superplastic Aluminum Alloy and Process for Producing Same, US Patent 6 056 835, May 2 2000
Available Online
V.I. Moskvitin and S.V. Makhov: On the Possibility of Manufacturing Aluminum-Scandium Alloying Compounds in an Aluminum Electrolyzer, Russ. J. Non-Ferrous Met. 39 (7) (1998) 39-43
M.G. Mousavi: Grain Refinement and Hot Cracking Resistance of Aluminium Weldments, Dr.Ing. Thesis, NTNU, Trondheim, Norway, 1999
M.G. Mousavi, C.E. Cross and Ø. Grong: Effect of Scandium and Titanium-Boron on Grain Refinement and Hot Cracking of Aluminium Alloy 7108, Sci. Technol. Weld. Joining 4 (1999) 381-388
Abstract
T. Mukai, T.G. Nieh, H. Watanabe and K. Higashi: Microstructure and Superplastic Properties in an ECAE Al-4Mg-0.5Sc Alloy Processed at Elevated Temperatures, Mater. Sci. Forum 304-306 (1999) 109-114
A.K. Mukhopadhyay, G.M. Reddy, K.S. Prasad, S.V. Kamat, A. Dutta and C. Mondal: Influence of Scandium Additions on the Microstructure and Properties of AA 7010 Alloy Sheets, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 63-71
A.K. Mukhopadhyay and G.M. Reddy: Influence of Trace Addition of Ag on the Weldability of Al-Zn-Mg-Cu-Zr Base 7010 Alloy, Mater. Sci. Forum 396-402 (2002) 1665-1670
J. Murken, O. Girard, R. Höhner, B. Skrotzki and G. Eggeler: On the Influence of Stress and Strain on the Coarsening of Precipitates in Al-Alloys under Creep Conditions, Mater. Sci. Forum 331-337 (2000) 1507-1512
J. Murken, R. Höhner, B. Skrotzki and G. Eggeler: On the Effect of Combined Thermal and Mechanical Loading on the Microstructural Evolution of an Al-Mg-Li Alloy, Mater. Sci. Forum 396-402 (2002) 1291-1296
L.E. Murr, G. Sharma, F. Contreras, M. Guerra, S.H. Kazi, M. Siddique, R.D. Flores, D.J. Shindo, K.F. Soto, E.A. Trillo, C. Schmidt and J.C. McClure: Joining Dissimilar Aluminum Alloys and Other Metals and Alloys by Friction Stir Welding, Aluminum 2001 – Proc. of the TMS 2001 Aluminium Automotive and Joining Sessions, eds. S.K. Das, J.G. Kaufman and T.J. Lienert, TMS, 2001 197-211
J.L. Murray: The Al-Sc (Aluminum-Scandium) System, J. Phase Equil. 19 (1998) 380- 384
M.M. Myshlyaev, V.M. Fedorov, L.V. Fedorova and H.J. McQueen: Development of Rapidly-Solidified Aluminum-Transition Metal Alloys for Long-Term Work at Elevated Temperatures, Proc. Hot Workability of Steels and Light Alloys-Composites, Aug. 24-28 1996 Montreal, Quebec, Canada 77-88
M. Nakayama, Y. Miura: The Effect of Scandium on the Age-Hardening Behavior of an Al- Cu Alloy, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. I, Atlanta, Georgia, USA 538-545
M. Nakayama et al.: Precipitation of Al₃Sc in Al-0.23 mass%Sc Alloy, J. Japan Inst. Metals 59 (5) (1995) 487-491
M. Nakayama and Y. Miura: Effect of Sc Addition on the Age-Hardening and Precipitation Behavior of Al-2.5 mass%Cu Alloy, , J. Japan Inst. Light Metals 46 (1996) 275-279
M. Nakayama et al.: Precipitation of Al₃Sc in Al-0.23 mass%Sc Alloy, Mater. Trans., JIM 38 (1997) 852-857
Abstract
M. Nakayama, T. Okuyama and Y. Miura: Microstructure and Mechanical Properties of Al-2.5%Cu-0.23%Sc Alloy, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 517-522
M. Nakayama, T. Okuyama and Y. Miura: Interaction between q’-Al₂Cu and Al₃Sc in the Heterogeneous Precipitation in an Al-Cu-Sc Alloy, Mater. Sci. Forum 331-337 (2000) 927-932
A.V. Nasonov et al.: Wetting of Carbon by Melts of Aluminium with Rare-Earth Metals, Inorg. Mater. 24 (1988) 1711-1714
O.P. Naumkin et al.: Phase Equilibrium Diagram and Properties of Aluminium-Scandium Alloys, Russ. Metall. (4) (1965) 128-136
O.D. Neikov, D.V. Lotsko, A.I. Sirko, A.V. Sameljuk, G.E. Thompson, N.P. Zakharova and N.A. Yefimov: Properties of Rapidly Solidified Powder Alloys of the Al-Zn-Mg System, Mater. Sci. Forum 396-402 (2002) 1223-1228
M. Nemoto, Z. Horita, M. Furukawa and T.G. Langdon: Microstructural Evolution for Superplasticity Using Equal-Channel Angular Pressing, Mater. Sci. Forum 304-306 (1999) 59-66
Z. Nie, T. Jin, J. Fu, G. Xu, J. Yang, J. Zhou and T. Zuo: Research on Rare Earth in Aluminum, Mater. Sci. Forum 396-402 (2002) 1731-1736
T.G. Nieh et al.: Subgrain Formation and Evolution During the Deformation of an Al-Mg-Sc Alloy at Elevated Temperatures, Scripta Mater. 36 (1997) 1011-1016
T.G. Nieh, L.M. Hsiung, J. Wadsworth and R. Kaibyshev: High Strain Rate Superplasticity in a Continuously Recrystallized Al-6%Mg-0.3%Sc Alloy, Acta Mater. 46 (1998) 2789-2800
H. Nishimura et al.: A Highly Reliable Via Filling Technology Using High-Temperature Al- Sc Alloy Sputter Deposition, International Electron Devices Meeting 1993, December 5-8 1993, Washington DC, USA 281-284
A.F. Norman and P.B. Prangnell: The Effect of Scandium on the Solidification Behaviour of Aluminium Alloys, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 219-224
A.F. Norman, P.B. Pragnell and R.S. McEwen: The Solidification Behaviour of Dilute Aluminium-Scandium Alloys, Acta Mater. 46 (1998) 5715-5732
I.I. Novikov, O.E. Grushko: Hot Cracking Susceptibility of Al-Cu-Li and Al-Cu-Li-Mn Alloys, Mater. Sci. Techn. 11 (1995) 926-932
G.M. Novotny and A.J. Ardell: Precipitation of Al₃Sc in binary Al-Sc alloys, Mater. Sci. Eng. A 318 (2001) 144-154
V. Ocenasek and M. Slamova: Resistance to Recrystallization due to Sc and Zr Addition to Al-Mg Alloys, Mater. Charact. 47 (2001) 157-162
M. Ocko, E. Babic, R. Krsmik, E. Girt and B. Leontic: Some Properties of AlSc Solid Solutions, J. Phys. F 6 (1976) 703-707
Abstract
M. Ocko et al.: Changes of the Lattice Parameter in Al 3d Alloys due to the Virtual Bound State, Solid State Comm. 18 (1976) 705-708
Kh. O. Odinaev et al.: Phase Equilibrium Diagram of the Al-Mg-Sc System in 0-33.3at.% Sc at 673 K, Dokl. Akad. Nauk Tadzh. SSR 32 (1989) 37-38
Kh. O. Odinaev et al.: Quasi-binary Sections and Liquidus Surface of the Al-Mg-Sc System, Russ. Metall. (4) (1991) 200-203
S.-I. Ogawa, H. Nishimura: A Novel Al-Sc (Scandium) Alloy for Future LSI Interconnection, International Electron Devices Meeting 1991, December 8-11 1991, Washington DC, USA 277-280
S. Ogawa, H. Nishimura and T. Yamada: Aluminum Interconnection, US Patent 5 759 868, June 2 1998
Available Online
S. Ogawa, H. Nishimura and T. Yamada: Aluminum Scandium Alloy Interconnection, US Patent 5 804 879, Sept. 8 1998
Available Online
K. Oh-ishi, Z. Horita, D.J. Smith and T.G. Langdon: Grain Boundary Structure in Al-Mg and Al-Mg-Sc Alloys after Equal-Channel Angular Pressing, J. Mater. Res. 16 (2001) 583-589
Abstract
H. Okamoto: Al-Sc (Aluminum-Scandium), J. Phase Equil. 12 (1991) 612- 613
H. Okamoto: Al-Sc (Aluminum-Scandium), J. Phase Equil. 21 (2000) 310
V.V. Ovchinnikov, A.M. Drits and T.V. Krymova: Experience in Applications of Aluminum-Lithium Alloy 1460, Russ. J. Non-Ferrous Met. 38 (12) (1997) 31-37
V.V. Ovchinnikov, A.M. Drits and T.V. Krymova: Technological Special Features of Production of Welded Aircraft Structures made of 1460 Aluminium-Lithium Alloy, Weld. Inter. 12 (1998) 489-492
V. Ozolins and M. Asta: Large Vibrational Effects upon Calculated Phase Boundaries in Al-Sc, Phys. Rev. Letters 86 (2001) 448-451
Abstract
A.B. Pandey, K.L. Kendig and D.B. Miracle: Development of a New Discontinuously Reinforced Aluminum for Space Applications, Affordable MMCs for High Performance Applications, eds. A. Pandey, K. Kendig, and T. Watson, 2001 TMS Fall Meeting, Indianapolis, Nov. 4-8 2001, 35-46
Abstract
C. Papastaikoudis, D. Papadimitropoulos: Influence of the Virtual Bound State on the Low- Field Hall Coefficient. II. Dilute Alloys of Sc, Ti, V, Co and Ni in Al, Phys. Rev. B 24 (1981) 3108-3114
Abstract
H.G. Paris, T.H. Sanders, Jr., and Y.W. Riddle: Assessment of Scandium Additions in Aluminum Alloy Design, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 499-504
B.A. Parker, Z.F. Zhou: The Mechanical Properties of Aluminium Magnesium Scandium Alloys, Proceedings of the 3rd International Conference on Aluminium Alloys, June 22-26 1992, Vol.I, NTH, Trondheim, Norway 363-367
B.A. Parker et al.: The Effect of Small Additions of Scandium on the Properties of Aluminium Alloys, J. Mater. Sci. 30 (1995) 452-458
B.A. Parker: On the Contribution of Coherency Strains to the Strength of Alloys, Mater. Sci. Forum 189/190 (1995) 347-351
B.E. Paton, A.Ya. Ishchenko, K.A. Yushchenko, A.G. Bratukhin, A.G. Vovnyanko, E.T. Vasilevskii and A.G. Molyar: Prospects for Using Welding in Construction of New Generation Aircraft, Paton Weld. J. 8 (1996) 343-344
Abstract
B.E. Paton: Problems and Advances in Welding at the Tranistion of the Centuries, Paton Weld. J. (7) (1999) 2-11
V.A. Perfilev et al.: Rapid Titrimetric Determination of Scandium in Aluminium Alloys, Ind. Lab. 62 (1996) 151
T. Pfannenmüller, E. Loechelt, P.-J. Winkler, S.M. Mozharovskij, D.S. Galkin, E.G. Tolchennikova, V.M. Chertovikov, V.G. Davydov, E.N. Kablov, L.B. Khokhlatova, N.I. Kolobnev and I.N. Fridlyander: Aluminium Based Alloy and Method for Subjecting it to Heat Treatment, World Patent WO 9915708, Apr. 1 1999
Available Online
Addendum to World Patent WO 9915708, Apr. 14 1999
Available Online
A. Pisch, J. Gröbner and R. Schmid-Fetzer: Application of Computational Thermochemistry to Al and Mg Alloy Processing with Sc Additions, Mater. Sci. Eng. A 289 (2000) 123-129
A. Pisch, F. Hodaj, P. Chaudouët and C. Colinet: Standard Enthalpies of Formation of some Mn-Y and Mn-Sc Intermetallic Compounds, J. Alloys & Compounds 319 (2001) 210-213
Yu. M. Platov, M.N. Pletnev: Phase Instability of Alloys Caused by Transmutation Effects During Neutron Irraditation, J. Nucl. Mater. 211 (1994) 95-100
Yu.A. Pokhil et al.: Mechanical Properties of Scandium-Alloyed Aluminium Alloys and their Welded Joints at Cryogenic Temperatures, Advances in Cryogenic Engineering (Materials) 42 (1996) 271-276
I.J. Polmear: Control of Precipitation Processes and Properties in Aged Aluminium Alloys by Trace Element Additions, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 75-86
D.P. Pope: Deformation and Fracture of Intermetallic Compounds Having the L1₂ Crystal Structure, Ordered Intermetallics – Physical Metallurgy and Mechanical Behavior, eds. C.T. Liu, R.W. Cahn and G. Sauthoff, 23-28 June 1991, Irsee, Germany 143-153
P.S. Popel et al.: Influence of Scandium on the Properties of Liquid Aluminium, Russ. Metall. (3) (1983) 38-43
I.N. Pyagai, A.V. Vakhobov: Enthalpy of Formation of Aluminides in the Al-Sc System, Russ. Metall. (5) (1990) 50-52
A.H. Ratner, M.B. Geilikman, S.V. Aleksandrovski, F. Jiang, H. Li and Z. Yin: Thermodynamic Calculation on Metallic Thermoreduction during Preparation of Aluminum-Rare Master Alloys, Trans. Nonferrous Met. Soc. China 11 (2001) (1) 18-21
Abstract
G.M. Raynaud: Procédé Permettant de Diminuer le Taux de Recristallisation de l’aluminium et de ses Alliages, FR Patent 2 637 914, Oct. 17. 1988
V.N. Rechkin et al.: Crystal Structures of some Scandium Aluminides, Sov. Phys. Crystall. 9 (1964) 325-327
K.-H. Rendigs: Aluminium Structures Used in Aerospace – Status and Prospects, Mater. Sci. Forum 242 (1997) 11-23
E.A. Repnikova et al.: Influence of Electron Irradiation on Decomposition of Alloy Al-Mg-Sc, Phys. Met. Metall. 57 (3) (1984) 103-106
Y.W. Riddle, H.G. Paris and T.H. Sanders, Jr.: Control of Recrystallization in Al-Mg-Sc-Zr Alloys, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 1179-1184
Y.W. Riddle and T.H. Sanders, Jr.: Recrystallization Performance of AA7050 Varied with Sc and Zr, Mater. Sci. Forum 331-337 (2000) 799-803
Y.W. Riddle and T.H. Sanders, Jr.: Contribution of Al₃Sc to Recrystallization Resistance in Wrought Al-Sc Alloys, Mater. Sci. Forum 331-337 (2000) 939-944
Y.W. Riddle, M. McIntosh and T.H. Sanders, Jr.: Improving Recrystallization Resistance in Wrought Aluminum Alloys with Scandium Addition, Lightweight Alloys for Aerospace Application VI, eds. K. Jata, E.W. Lee, W. Frazier and N.J. Kim, TMS, 2001 25-39
Abstract
Y.W. Riddle, H. Hallem and N. Ryum: Highly Recrystallization Resistant Al-Mn-Mg Alloys Using Sc and Zr, Mater. Sci. Forum 396-402 (2002) 563-568
O. Roder et al.: Correlation Between Microstructure and Mechanical Properties of Al-Mg Alloys Without and With Scandium, Mater. Sci. Forum 217-222 (1996) 1835- 1840
O. Roder et al.: Fatigue Properties of Al-Mg Alloys With and Without Scandium, Mater. Sci. Eng. A234-236 (1997) 181-184
C.L. Rohrer, M.D. Asta, S.M. Foiles and R.W. Hyland, Jr.: A Kinetic Model of Precipitate Evolution, Mat. Res. Soc. Symp. Proc. 398 (1996) 477-482
L.L. Rokhlin et al.: Formation of Grain Boundaries of a Single Phase Liquid Solution in the Al-Mg-Sc-Zr System, Russ. Metall. (6) (1991) 146-148
L.L. Rokhlin et al.: Structure of the Phase Equilibrium Diagrams of Aluminum Alloys with Scandium, Powder Met. & Met. Cer. 36 (1997)
T.D. Rostova and V.V. Zakharov: Shear Bands in Aluminum Lithium Alloys, Met. Sci. & Heat Tr. (6) (1997) 236-239
T.D. Rostova and V.V. Zakharov: Anisotropy of Mechanical Properties of Al-Li Alloy Sheets, Russ. J. Non-Ferrous Met. 38 (8) (1997) 59-64
T.D. Rostova, V.G. Davydov, V.I. Yelagin and V.V. Zakharov: Effect of Scandium on Recrystallization of Aluminum and its Alloys, Mater. Sci. Forum 331-337 (2000) 793-798
V.I. Ryazantsev, V.A. Fedoseev: Arc Welding Structures of 1420 Aluminium Alloy, Weld. Inter. 9 (1995) 311-315
V.I. Ryazantsev, V.A. Fedoseev: Mechanical Properties of Welded Joints in Aluminium Alloys of the Al-Cu System, Weld. Inter. 9 (1995) 566-569
V.I. Ryazantsev, V.A. Fedoseev: Technology of Arc-Welding Aluminium Alloys Containing Lithium, Weld. Inter. 10 (1996) 983-986
V.I. Ryazantsev, V.A. Fedoseev: Effect of the Arc Welding Conditions and the Composition of Filler Wire on the Mechanical Properties of Welded Joints in Aluminium Alloys, Weld. Inter. 11 (1997) 995-998
J. Røyset, N. Ryum: Precipitation and Recrystallization of an Al-Mg-Sc Alloy, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. I, Atlanta, Georgia, USA 194-201
J. Røyset and N. Ryum: Precipitation Kinetics and Mechanisms in a Binary Al-Sc Alloy, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 793-798
J. Røyset, H. Hovland and N. Ryum: An Investigation of Dilute Al-Sc-Si Alloys, Mater. Sci. Forum 396-402 (2002) 619-624
A. Saccone, G. Cacciamani, D. Macciò, G. Borzone and R. Ferro: Contribution to the Study of the Alloys and Intermetallic Compounds of Aluminium with the Rare-Earth Metals, Intermetallics 6 (1998) 201-215
G.A. Salishchev et al.: Superplasticity of Aluminium Alloys with Ultrafine Grained Structure, Proceedings of the Second International Conference on Aluminium Alloys, October 9-13 1990, Beijing, China 413-415
N. Sano et al.: Precipitation Process of Al-Sc Alloys, Journal de Physique 48 C6 (1987) 337-342
N. Sano, H.-H. Jo, , K.-I. Hirano and T. Sakurai: Precipitation Study of an Al-0.25 mass%Sc Alloy, , J. Japan Inst. Metals 39 (1989) 444-450
N. Sano et al.: Precipitation Study of an Al-0.25 wt.% Sc Alloy, Proceedings of the Second International Conference on Aluminium Alloys, October 9-13 1990, Beijing, China 549-554
E.M. Savitsky, V.F. Terehova, I.V. Burov and O.P. Naumkin: Study of Rare Earth Crystals and Alloys, Proc. Fourth Conference on Rare Earth Research, ed. L. Eyring, April 22-25 1964, Phoenix, Arizona, USA 409-420
R.R. Sawtell et al.: Superplastic Aluminum Alloys Containing Scandium, US Patent 4 689 090, Aug. 25 1987
R.R. Sawtell and J.W. Morris, Jr.: Exploratary Alloy Development in the System Al-Sc-X, Dispersion Strengthened Aluminium Alloys, January 25-29 1988, Phoenix, Arizona, USA 409-420
R.R. Sawtell et al.: Superplastic Aluminum Products and Alloys, US Patent 4 874 440, Oct. 17, 1989
R.R. Sawtell and C.L. Jensen: Mechanical Properties and Microstructures of Al-Mg-Sc Alloys, Metall. Trans. A 21A (1990) 421-430
U. Schmidt, A.L. Beresina, K.V. Chuistov, T.A. Monastyrskaja and A.D. Rud: Decomposition of Rapidly Quenched Supersaturated Al – Sc – X (X: Li, Ta, Ti) Alloys, Proc. NATO-conference on Advanced Light Alloys and Composites,1997, Advanced Study Institute, Zakopane, Poland
U. Schmidt, A.L. Beresina and A.D. Rud: The Decomposition Process in Rapidly Quenched AlLiSc – Alloys, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 787-792
U. Schmidt and B. Schmidt: Modelling of the Transition Kinetics in Al-Alloys, Mater. Sci. Forum 331-337 (2000) 889-900
J.H. Schneibel and E.P. George: Microstructure, Compression and Fracture Behavior of Al₃Sc, Scripta Metall. Mater. 24 (1990) 1069-1074
J.H. Schneibel and P.M. Hazzledine: The Crystallography of Cleavage Fracture in Al₃Sc, Mat. Res. Soc. Symp. Proc. 213 (1991) 323-328
J.H. Schneibel and P.M. Hazzledine: The Crystallography of Cleavage Fracture in Al₃Sc, J. Mater. Res. 7 (1992) 868-875
Abstract
A. Schulz, K. Schimanski and P. Mayr: Spray Forming of Scandium Containing Al-Cu-Alloys, Proc. Int. Conf. On Spray Deposition and Melt Atomisation (SDMA 2000), Bremen, Germany, June 26 – 28 2000 vol. 1, 243-256
G.O. Schumann and R.C. Calcraft: Weldability of High Strength Aluminium-Scandium Alloys, Australasian Weld. J. 46 (2001) 46-47
J.C. Schuster and J. Bauer: The Ternary Systems Sc-Al-N and Y-Al-N, J. Less-Common Met. 109 (1985) 345-350
G.D. Scott, B.S. Shabel and A. Morales: Aluminum Alloy Suitable for Pistons, US Patent 5 162 065, Nov. 10 1992
Available Online
E.I. Selnikhina, L.I. Kaigorodova and A.A. Tkachenko: The Formation of the Grain Boundary Structure, Aging Behavior and Mechanical Properties of Al-Zn-Mg-Cu Alloy, Mater. Sci. Forum 294-296 (1999) 707-710
O.G. Senatorova, A.N. Uksusnikov, J.N. Fridlyander, J. Koshorst, R.R. Romanova, N.A. Ryazanova, A. Galliot and V.V. Cherkassov: TEM Study of Precipitation in High-Strength 1987 Alloy Sheets after Superplastic Forming, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 589-593
O.G. Senatorova, A.N. Uksusnikov, S.F. Lehoshina, I.N. Fridlyander and I.P. Zhegina: Influence of Different Minor Additions on Structure and Properties of High-Strength Al-Zn-Mg-Cu Alloy Sheets, Mater. Sci. Forum 331-337 (2000) 1249-1253
O.N. Senkov, D.B. Miracle, Y.V. Milman, J.M. Scott, D.V. Lotsko and A. Sirko: Low Temperature Mechanical Properties of Scandium-Modified Al-Zn-Mg-Cu Alloys, Mater. Sci. Forum 396-402 (2002) 1127-1132
K.N. Sergeev, T.V. Krymova, A.M. Dritz and S.G. Bulgakova: High-Strength Weldable Aluminum-Lithium Alloy 1460 in Multipurpose Aerospace Systems, Russ. J. Non-Ferrous Met. 39 (12) (1998) 25-28
O.A. Setyukov and J.N. Fridlyander: Stress Relaxation in Al Alloys of Al-Mg-Mn, Al-Mg-Sc and Al-Mg-Li-Systems, Mater. Sci. Forum 331-337 (2000) 1381-1385
R.E. Shalin et al.: Design and Fabrication of Large Structures of Aluminium-Lithium Alloys for Aerospace Technology, Weld. Inter. 11 (1997) 387-392
A.M. Shammazov, N.K. Tsenev, R.Z. Valiev, M.M. Myshlyaev, M.M. Bikbulatov and S.P. Lebedich: High-Strain-Rate Superplasticity of Commercial Grade 1421 and 1460 Aluminum Alloys, Phys. Met. Metall. 89 (3) (2000) 314-318
Abstract
V.G. Shevchenko et al.: Effect of Sc, La and Sm on the Oxidation of Aluminum, Inorg. Mater. 22 (1986) 205-208
G.L. Shneider et al.: Stability of Supersaturated Solid Solution of Al-Mg-Li Alloy with Sc Addition, Tsvetnye Metally 34 (3) (1993) 44-46
G.L. Shneider, A.M. Drits: Hardenability of Aluminum-Lithium Alloys, Met. Sci. & Heat Tr. (9) (1995) 373-377
G.L. Shneider: Phase Transformations in Heat Treatment of Al-Li Alloys and Optimization of Operational Properties of Semifinished Products from these Alloys, Met. Sci. & Heat Tr. 40 (1) (1998) 27-33
G.L. Shneider, L.M. Sheveleva and V.V. Kafelnikov: Delayed Fracture of Aluminum Alloys, Met. Sci. & Heat Tr. 41 (3) (1999) 109-116
A.B. Shubin, L.F. Yamshchikov, S.P. Yatsenko, S.S. Zobnin and O.B. Yakovlev: Thermodynamic Properties of Intermetallides in the Sc-Al System, Russ. Metall. (6) (1999) 145-147
E.I. Shvechkov, T.D. Rostova and V.V. Zakharov: Study of Anisotropy of Mechanical Properties of Alloy 1424 Sheets, Russ. J. Non-Ferrous Met. 41 (4) (2000) 95-102
E.I. Shvechkov, T.D. Rostova, V.V. Zakharov and A.V. Demidenkov: Cyclic Endurance of Sheets from Alloy 1424 with Different Thicknesses, Met. Sci. & Heat Tr. 43 (4) (2001) 148-151
V.I. Silaeva, B.A. Prusakov and G.I. Eskin: Effect of Microalloying on the Structure and Properties of Alloys in the Al-Si-Cu System, Met. Sci. & Heat Tr. 42 (6) (2000) 241-245
O. Simmich et al.: The Effect of Scandium on the Structure of Precipitates in AlLiCu Alloys, Mater. Sci. Forum 217-222 (1996) 845-850
V. Singh and A.A. Gokhale: Control of Grain Structure through Transition Elemental Additions in an Al-Li Base Alloy, Mater. Sci. Forum 331-337 (2000) 477-482
V. Singh, K.S. Prasad and A.A. Gokhale: Solidification Structure of Aluminium with Trace Additions of Sc and Zr, Int. J. Cast Metals Res. 14 (2002) 287-291
V.S. Sinyavskii, V.D. Val’kov and E.V. Titkova: The Effect of Scandium and Zirconium Additions on Corrosion Properties of Al-Mg Alloys, Protection of Metals 34 (1998) 549-555
Abstract
B. Skrotzki, J. Murken and B. Heinz: Comparison of Laser-Beam Welding and Friction Stir Welding of Age-Hardenable Aluminum Alloys, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 343-350
A.F. Smith: Use of Aluminium-Lithium Alloys in Helicopters, Proceedings of Alumitech ’97, May 19-23 1997, Atlanta, Georgia, USA 36-50
E.M. Sokolovskaya et al.: Reaction of Aluminum with Chromium and Scandium, Met. Sci. & Heat Tr. (11) (1989) 837-839
E.M. Sokolovskaya et al.: Investigation of Rapidly Quenched Aluminum Alloys Hardened with Transition Metals, Russ. J. Non-Ferrous Met. 37 (7) (1996) 76-79
E.M. Sokolovskaya et al.: Time-Temperature Section of the Phase Diagram of the Al-Sc-Zr System at 500°C, Met. Sci. & Heat Tr. (5) (1997) 211-213
E.M. Sokolovskaya, E.F. Kazakova, V.A. Alikhanov and E.V. Zhuravleva: Interaction between Al₃Sc and Al₆Mn Intermetallic Compounds at 770 K, Moscow Univ. Chem. Bull. 52 (5) (1997) 70-72
E.M. Sokolovskaya, E.F. Kazakova and O.D.-S. Kendivan: Polythermal Cross Sections of the Systems Al-V-Me (Me = Zr, Sc) for the Al₂₁V₂-MeAl₃ Sections, Russ. Metall. (4) (1998) 135-137
Y. Songbo, H. Boyun and Y. Zhimin: Effect of Minor Sc on High Temperature Mechanical Properties of Ti-Al Based Alloys, Mater. Sci. Eng. A 280 (2000) 204-207
C.J. Sparks et al.: Bonding Energies and Long-Range Order in the Trialuminides, Mat. Res. Soc. Symp. Proc. 213 (1991) 363-368
P.K. Spitsyn, O.N. L’vov: Simultaneous Spectrophotometric Determination of Titanium and Scandium in Aluminum Alloys, Ind. Lab. 51 (1985) 295-296
J.T. Staley et al.: Aluminum Alloys for Aerostructures, Adv. Mater. & Proc. (10) (1997) 17-20
Abstract
E.A. Starke, Jr., J.T. Staley: Application of Modern Aluminum Alloys to Aircraft, Prog. Aerospace Sci. 32 (1996) 131-172
A. Sverdlin, A.M. Drits, T.V. Krimova, K.N. Sergeev and I.B. Ginko: Aluminum-Lithium Alloys for Aerospace, Adv. Mater. & Proc. (6) (1998) 49-51
Abstract
A. Sverdlin, A. Drits and V. Ovchinnikov: Weldability of Aluminum-Copper-Lithium Alloys, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 255-260
W.T. Tack: Aluminum-Scandium Alloys, US Patent 5 597 529, Jan. 28 1997
Available Online
W.T. Tack and I.L.H. Hansson: Aluminum Alloys Containing Scandium with Zirconium Additions, US Patent 5 620 652, Apr. 15 1997
Available Online
S. Takayama: Effects of Sc or Tb Addition on the Microstructures and Resistivities of Al Thin Films, Mat. Res. Soc. Symp. Proc. 500 (1998) 107-112
C. Tan et al.: The Ageing Behavior and Tensile Properties of Al-Sc Alloy, Proceedings of the 3rd International Conference on Aluminium Alloys, June 22-26 1992, Vol.I, NTH, Trondheim, Norway 290-294
C.Y. Tan et al.: The Ageing Behaviour and Tensile Properties of Al-Li Alloy Containing Sc, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. II, Atlanta, Georgia, USA 329-333
C.-Y. Tan, Z.-Q. Zheng, C.-Q. Xia and Y. Liang: The Ageing Feature of Al-Li-Cu-Mg-Zr Alloy Containing Sc, J. Cent. South Univ. Technol. 7 (2) (2000) 65-67
G.P. Tarcy, P.A. Foster, Jr.: Method for making a Light Metal-Rare Earth Metal Alloy, US Patent 5 037 608, Aug. 6 1991
G.P. Tarcy et al.: Method for Making a Light Metal-Rare Earth Metal Alloy, US Patent 5 238 646, Aug. 24 1993
G.P. Tarcy and M.L. Slaugenhaupt: Method of Making a Light Metal-Rare Earth Alloy, US Patent 6 045 631, Apr. 4 2000
Available Online
J. Tarnacki and Y.-W. Kim: Investigation of As-cast and Rapidly Solified Al₃Sc, Scripta Metall. Mater. 23 (1989) 1063-1068
M.Yu. Teslyuk and V.S. Protasov: The Crystal Structure of Ternary Phases in the Sc-Cu-Al System, Sov. Phys. Crystall. 10 (1966) 470-471
Y. Tian, B. Sun and Y. Zhai: Preparation of Al-Sc Alloy in Chloride System with Molten Salt Electrolysis, Trans. Nonferrous Met. Soc. China 8 (4) (1998) 626-631
Abstract
Y. Tian, B. Sun and Y. Zhai: Measurement on Physiochemical Properties of NaCl-KCl-ScCl₃ System for Manufacture of Al-Sc Alloy by Molten Salt Electrolysis, J. Mater. Sci. Technol. (China) 15 (2) (1999) 155-158
T. Torma, E. Kovács-Csetényi, I. Vitányi, M. Butova and J. Stepanov: Effect of Scandium in High Purity Aluminium, Proc. 6th International Symposium on High Purity Materials in Science and Technology, May 6-10 1985, Akademie der Wissenschaften der DDR, Dresden, GDR, 388-389
T. Torma et al.: The Effect of Scandium Addition on the Mechanical Properties of Pure Aluminium and of an AlMg6 Alloy, Mater. Sci. Forum 13/14 (1987) 497-503
T. Torma et al.: Hardening Mechanisms in Al-Sc Alloys, J. Mater. Sci. 24 (1989) 3924-3927
L.S. Torodskaya et al.: Polythermal Sections of the Al-Sc-Zr System, Russ. Metall. (5) (1992) 128-131
L.S. Toropova et al.: Determination of Elastic Strain of the Matrix due to Particles of Phase ScAl₃ in an Al-Mg-Sc Alloy, Phys. Met. Metall. 54 (1) (1982) 189-191
L.S. Toropova et al.: Investigation of Alloys of the Al-Sc-Zr System in the Aluminium-rich Range, Phys. Met. Metall. 70 (6) (1990) 106-110
L.S. Toropova et al.: Projection of Solidus Surfaces in the Al-rich Region of the Al-Cu-Sc System, Russ. Metall. (3) (1992) 194-199
E.D. Trubnyakova et al.: Phase Equilibria in the Aluminum-Rich Corners of the Ternary Systems Al-Sr-Sc(La, Ce, Pr), Russ. Metall. (3) (1987) 219-222
N.K. Tsenev et al.: Mechanical Properties of Submicron Grained Al-Li Alloys, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 1125-1132
N.K. Tsenev et al.: Advanced Properties of Ultra Fine-Grained Al-Alloys, Mater. Sci. Forum 242 (1997) 127-134
N.I. Turkina, V.I. Kuzmina: Phase Reactions in Al-Mg-Sc Alloys (up to 26% Mg and 3% Sc), Russ. Metall. (4) (1976) 179-183
A.T. Tyvanchuk et al.: Isothermal Section of the Sc-Al-Si System at 770°K, Russ. Metall. (4) (1988) 190-192
R. Ünal and K.U. Kainer: Production of High Strength Al-Mg-Sc Alloys by PM, Proc. 1997 European Conference on Advances in Structural PM Component Production (EURO PM 97), Oct. 15-17 1997, Munich, Germany 482-487
R. Ünal and K.U. Kainer: Production of High Strength Al-Mg-Sc Alloys by PM, Powd. Met. 41 (2) (1998) 119-122
R. Ünal and K.U. Kainer: PM Production of High Strength Aluminium-Magnesium-Scandium Alloys, Met. Powd. Report 54 (2) (1999) 35 (Abstract only)
R.Z. Valiev, A.V. Korznikov and R.R. Mulyukov: Structure and Properties of Ultrafine-Grained Materials Produced by Severe Plastic Deformation, Mater. Sci. Eng. A 168 (1993) 141-148
V.V. Valuev: Microstructure of Large Ingots of Aluminum Alloy 01570, Met. Sci. & Heat Tr. 40 (6) (1998) 234-237
V.A. Vertogradskii and I.N. Belskaya: Dependence of the Thermal Conductivity of Alloys of the Al-Mg System on the Composition and Temperature, Met. Sci. & Heat Tr. 40 (6) (1998) 231-233
S.L. Verzasconi, J.W. Morris, Jr.: Cryogenic Mechanical Properties of Low Density Superplastic Al-Mg-Sc Alloys, Advances in Cryogenic Engineering (Materials) 36 (1990) 1127-1133
J.S. Vetrano, S.M. Bruemmer, L.M. Pawlowski and I.M. Robertson: Influence of the Particle Size on Recrystallization and Grain Growth in Al-Mg-X Alloys, Mater. Sci. Eng. A 238 (1997) 101-107
J.S. Vetrano, C.H. Henager, Jr., M.T. Smith and S.M. Bruemmer: Microstructural Development for Superplasticity in Al-Mg-Mn Alloys, Hot Deformation of Aluminum Alloys II, eds. T.R. Bieler, L.A. Lalli and S.R. MacEwen, TMS, USA 1998 407-418
J.S. Vetrano, C.H. Henager, Jr., S.M. Bruemmer, Y. Ge and C.H. Hamilton: Use of Sc, Zr and Mn for Grain Size Control in Al-Mg Alloys, Superplasticity and Superplastic Forming 1998, eds. A.K. Gosh and T.R. Bieler, TMS, USA 1998 89-97
N.V. Vyazovikina: The Effect of Scandium on the Corrosion Resistance of Aluminum and its Alloys in 3% NaCl Solution, Protection of Metals 35 (1999) 448-453
Abstract
D.J. Waldron and W.F. Bozich: Heat Treated Al-Cu-Li-Sc Alloys, US Patent 6 074 498, June 13 2000
Available Online
J.-S. Wang: Dislocation Nucleation and the Intrinsic Fracture Behavior of L1₂ Intermetallic Alloys, Acta Mater. 46 (1998) 2663-2674
Z.F. Wang, P. Wang, C.L. Briant and K.S. Kumar: The Effect of Microstructure on the Polarization and Stress Corrosion Cracking in Al-5Mg Alloys Proc. Corrosion2000, Orlando, Florida, USA 00373/1-12
Z. Wang, P. Wang, K.S. Kumar and C.L. Briant: Stress Corrosion Cracking of Aluminum-Magnesium Alloys Containing Scandium and Silver Additions, Proc. Chemistry and Electrochemistry of Corrosion and Stress Corrosion Cracking, ed. R.H. Jones, TMS, 2001 573-582
A. Washikita, K. Kitagawa, V.I. Kopylov and A. Vinogradov: Tensile and Fatigue Properties of Al-Mg-Sc-Zr Alloy Fine-Grained by Equal-Channel Angular Pressing, Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 341-350
Abstract
T.J. Watson: High Strength Aluminum Alloy, US Patent 6 248 453, June 19 2001
Available Online
T.J. Watson: High Strength Aluminium Alloy, European Patent EP 1 111 078 A2, June 27 2001
L.A. Willey: Aluminum Scandium Alloy, US Patent 3 619 181, Nov. 9 1971
R. Winkler and J. Wüst: Strukturbauteil aus einer Aluminium-Druckgusslegierung, European Patent EP 0918095 A1, May 26 1999
Available Online
T. Wirtz, G. Lütjering, A. Gysler, B. Lenczowski and R. Rauh: Fatigue Properties of the Aluminium Alloys 6013 and Al-Mg-Sc, Mater. Sci. Forum 331-337 (2000) 1489-1494
J.J. Witters et al.: Evaluation of Al-Li Alloys 1420 and 1421, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 351-356
R. Wolter et al.: The Description of the Isothermal Decomposition Processes in Al-Sc Alloys by means of Electric Resistivity Measurements and TEM Investigations, Crystal Res. & Technol. 28 (1993) 63-72
K.-D. Woo, H.-J. Mun and S.W. Kim: The Effect of Sc on the Precipitation Behavior in Al-Zn-Mg-Cu Alloys, Proc. Fourth Pacific Rim International Conference on Advanced Materials and Processing (PRICM 4), 2547-2550
C. Woodward, M. Asta, G. Kresse and J. Hafner: Density of Constitutional and Thermal Point Defects in L1₂ Al₃Sc, Phys. Rev. B 63 (2001) 094103-1-6
Abstract
Y.L. Wu, F.H. Froes, C.G. Li and J. Liu: Effects of Microalloying with Sc, Ni and Ce on the Behavior of Ingot Aluminum Alloy C912 (Al-Zn-Mg-Cu), Synthesis/Processing of Lightweigth Metallic Materials II, Feb. 9-13 1997 Orlando, FL, USA 73-81
Y.-L. Wu, F.H. Froes, C. Li and A. Alvarez: Microalloying of Sc, Ni and Ce in an Advanced Al-Zn-Mg-Cu Alloy, Metall. Mater. Trans. A 30A (1999) 1017-1024
Abstract
Y. Xiao, C. Gao, H. Ma and S. Tian: Effect of Scandium on Superplasticity of Al-Mg Alloys, Trans. Nonferrous Met. Soc. China 11 (2001) (2) 235-238
Abstract
J.-H. Xu and A.J. Freeman: Phase Stability and Electronic Structure of ScAl₃ and ZrAl₃ and of Sc-stabilized Cubic ZrAl₃ Precipitates, Phys. Rev. B 41 (1990) 12553-12561
Abstract
B.F. Yakushin, S.Yu. Nastich: A Rapid Method of Evaluating the Weldability of Aluminium Alloys, Weld. Inter. 9 (1995) 915-916
D. Yamaguchi, Z. Horita, T. Fujinami, M. Nemoto and T.G. Langdon: Factors Affecting Grain Refinement in Equal-Channel Angular Pressing, Mater. Sci. Forum 331-337 (2000) 607-612
A. Yamashita, D. Yamaguchi, Z. Horita and T.G. Langdon: Influence of Pressing Temperature on Microstructural Development in Equal-Channel Angular Pressing, Mater. Sci. Eng. A 287 (2000) 100-106
M.R. Yavorskaya et al.: Increasing the Density and Strength of Weld Metal in the Zone of Backing Runs of Important Components of AMg6NPP Alloy, Paton Weld. J. 5 (1993) 172-175
Z. Yin, Q. Pan, Y. Zhang and F. Jiang: Effect of Minor Sc and Zr on the Microstructure and Mechanical Properties of Al-Mg Based Alloys, Mater. Sci. Eng. A 280 (2000) 151-155
Z. Yin, L. Yang, Q. Pan and F. Jiang: Effect of Minor Sc and Zr on Microstructures and Mechanical Properties of Al-Zn-Mg based Alloys, Trans. Nonferrous Met. Soc. China 11 (2001) (6) 822-825
Abstract
M.H. Yoo, C.L. Fu: Cleavage Fracture of Ordered Intermetallic Alloys, Mater. Sci. Eng. A153 (1992) 470-478
K. Yu, S. Li, W. Li and Y. Xiao: Effect of Trace Sc and Zr on Ageing Behavior and Tensile Properties of 2618 Alloy, Trans. Nonferrous Met. Soc. China 9 (3) (1999) 593-598
Abstract
K. Yu, S. Li and W. Li: Recrystallization Behavior in an Al-Cu-Mg-Fe-Ni Alloy with Trace Scandium and Zirconium, Mater. Trans., JIM 41 (2000) 358-361
Abstract
K.A. Yushchenko et al.: Effect of Scandium on Weldability and Properties of Welded Joints in Aluminium-Magnesium-Lithium System Alloys, Welding in the World 35 (1995) 48-51
V.V. Zakharov, T.D. Rostova: On the Possibility of Scandium Alloying of Copper-Containing Aluminum Alloys, Met. Sci. & Heat Tr. (2) (1995) 65-69
V.V. Zakharov and T.D. Rostova: High-Resource High-Strength Aluminum Alloys, Met. Sci. & Heat Tr. (5) (1995) 203-207
V.V. Zakharov: Industrial Aluminum Alloys with Scandium Additive, Met. Sci. & Heat Tr. (7) (1995) 283-285
V.V. Zakharov and T.D. Rostova: Shear Bands in Aluminum Alloys Containing Scandium and Lithium, Met. Sci. & Heat Tr. (4) (1996) 163-167
V.V. Zakharov: Stability of the Solid Solution of Scandium in Aluminum, Met. Sci. & Heat Tr. (2) (1997) 61-66
V.V. Zakharov and T.D. Rostova: Mechanical Anisotropy in Scandium-Bearing Aluminum Alloy Sheets, Alum. Trans. 2 (2000) 329-335
Abstract
I.I. Zalutskii and P.I. Kripyakevich: RAl₃ Compounds in Rare Earth-Aluminum Systems and their Crystal Structures, Sov. Phys. Crystall. 12 (1967) 341-343
V.M. Zamyatin et al.: Surface Tension and Density Polytherms for Molten Aluminium Alloyed with Titanium, Scandium and Iron, Sov. Non-Ferrous Met. Res. 14 (1986) 140-143
H. Zhang, H. Uochi, S. Yamazaki, Y. Takemura, M. Miyazaki, A. Murakami, T. Konuma, A. Sugawara and Y. Uehara: Process for Fabricating Electronic Circuits with Anodically Oxidized Scandium Doped Aluminum Wiring, US Patent 5 830 786, Nov. 3 1998
J. Zhang, Z. Yin, Y. Zhang, Y. Gao and Q. Pan: Microstructure of Differently Treated Al-Mg-Sc-Zr Alloys, J. Cent. South Univ. Technol. 4 (1) (1997) 24-27
E. Zschech: Metallkundliche Prozesse bei der Wärmebehandlung Aushärtbarer Aluminiumlegierungen, Härterei-Technische Mitteilungen 51 (3) (1996) 137-144

List of Aluminum-Scandium Related Papers

Leave a Reply Cancel reply

Search

Archive

Recent Posts

Recent Comments

Applications of Scandium in Al-Sc Alloys

Jervisite Mineral Data

Company

Production

Contact us