List of Al-Sc related papers

The papers are ordered by author and date


  1. Z. Ahmad and B.J. Abdul-Aleem: Scandium Alloyed Al 5052: A High Performance Material for Marine Environment, Proc. EuroCorr 2000

  2. Z. Ahmad, A. Ul-Hamid and B.J. Abdul-Aleem: The Corrosion Behavior of Scandium Alloyed Al 5052 in Neutral Sodium Chloride Solution, Corros. Sci. 43 (2001) 1227-1243

  3. T. Aiura, N. Sugawara and Y. Miura: The Effect of Scandium on the As-Homogenized Microstructure of 5083 Alloy for Extrusion, Mater. Sci. Eng. A 280 (2000) 139-145

  4. T. Aiura and Y. Miura: The Effect of Scandium on the Microstructure of Al Alloys, Proc. Second International Conference on Processing Materials for Properties, eds. B. Mishra and C. Yamauchi, TMS (2000) 41-44

  5. H. Akamatsu, T. Fujinami, Z. Horita and T.G. Langdon: Influence of Rolling on the Superplastic Behavior of an Al-Mg-Sc Alloy after ECAP, Scripta Mater. 44 (2001) 759-764

  6. A.A. Alalykin, I.I. Novikov, V.K. Portnoy and V.I. Pavlov: Superplastic Flow of Aluminum Alloys in Recrystallized and Unrecrystallized Condition, Proceedings of the Second International Conference on Aluminium Alloys, October 9-13 1990, Beijing, China 403-407

  7. A.A. Alekseev, E.A. Lukina, M.I. Ermolova and L.B. Khokhlatova: Mechanism of d'-Phase Formation in Al-Li and Al-Li-Mg Systems Alloys, Mater. Sci. Forum 396-402 (2002) 989-994

  8. R.A. Altynbaev et al.: Phase Equilibrium in the Al-Ba-Sc System, Russ. Metall. (4) (1987) 194-196

  9. V.N. Ananev, L.B. Ber, V.G. Davydov, V.I. Elagin and A.I. Orozov: Structural Aspects of Instabilities in the Properties of Aluminum - Lithium Alloys Subject to Prolonged Low-Temperature Heating, Russ. J. Non-Ferrous Met. 38 (7) (1997) 54-61

  10. M.M. Antonova and V.B. Chernogorenko: Resistance to Hydrogen of Al-Sc Alloys, Russ. J. Applied Chem. 74 (2001) 396-399
    Abstract

  11. A.J. Ardell: Measurement of Solubility Limits from Data on Precipitate Coarsening, Experimental Methods of Phase Diagram Determination, eds. J.E. Morral, R.S. Schiffman and S.M. Merchant, The Minerals, Metals & Materials Society, 1994, 57-66

  12. M. Asta, S.M. Foiles and A.A. Quong: First-Principles Calculations of Bulk and Interfacial Thermodynamic Properties for fcc-based Al-Sc Alloys, Phys. Rev. B 57 (1998) 11265-11275
    Abstract

  13. M. Asta, V. Ozolins, and C. Woodward: A First-Principles Approach to Modeling Alloy Phase Equilibria, JOM 53 (9) (2001) 16-19
    Abstract

  14. M. Asta and V. Ozolins: Structural, Vibrational and Thermodynamic Properties of Al-Sc Alloys and Intermetallic Compounds, Phys. Rev. B 64 (2001) 094104-1-14
    Abstract

  15. E.S. Balmuth: The Status of Al-Li Alloys, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. III, Atlanta, Georgia, USA 82-89

  16. M.K. Banerjee and S. Bandyopadhyay: Development of Mechanically Alloyed AlSiMg-SiCp Metal Matrix Composites with Trace Scandium Additions, Proc. ACUN-2: International Composites Conference on Composites in the Transportation Industry Feb. 14-18 2000, Sydney, Australia, Vol 2 733-746

  17. C.W. Bartges, S.E. Baumann, R.W. Hyland, Jr., C.L. Jensen, G.P. Tarcy, K.D. Vinnedge and T.C. Skeen: Memory Disk Sheet Stock and Method, US Patent 5 601 934, Feb. 11 1997
    Available Online

  18. M.F Bartholomeusz, J.A. Wert: Effect of Dislocation Dissociation on Crack Tip Plasticity in L12 Intermetallic Alloys, Acta Metall. Mater. 40 (1992) 673- 682

  19. T.J. Bastow, C.T. Forwood, M.A. Gibson and M.E. Smith: Local Site Symmetry and Electronic Structure of Trialuminide and Related Intermetallic Alloys Probed by Solid-State NMR, Phys. Rev. B 58 (6) (1998) 2988-2997
    Abstract

  20. G.I. Batalin, V.S. Sudavtsova and N.N. Mar'yanchik: Thermodynamic Properties of Liquid Binary Alloys of the Al-Sc, Al-V and Al-Ti Systems, Soviet Progress in Chemistry (8) (1985) 35-37

  21. S.F. Baumann, E.L. Colvin, R.W. Hyland, Jr. and J.I. Petit: Aluminum Magnesium Alloy Product Containing Dispersoids, US Patent 5 624 632, Apr. 29 1997
    Available Online

  22. Yu.A. Bazin et al.: Possible Reasons for the Modification and Hardening of Aluminium by Scandium (Summary), Sov. Non-Ferrous Met. Res. 12 (1984) 414

  23. Yu.A. Bazin, B.A. Baum: About Mechanism of Alloy Modifying with Soluble Additions, Tsvetnye Metally 35 (7) (1994) 130-136

  24. N.A. Belov and E.S. Naumova: Prospects for the Design of Structural Cast Eutectic Al-Ce-Ni Alloys, Russ. Metall. (6) (1996) 87-90

  25. L.B. Ber and V.G. Davydov: Influence of the Ageing Realization Scheme on the Phase Transformations and Properties of Commercial Aluminium Alloys, Mater. Sci. Forum 396-402 (2002) 983-988

  26. P.B. Berbon, S. Komura, A. Utsunomiya, Z. Horita, M. Furukawa, M. Nemoto and T.G. Langdon: An Evaluation of Superplasticity in Aluminum-Scandium Alloys Processed by Equal-Channel Angular Pressing, Mater. Trans., JIM 40 (1999) 772-778
    Abstract

  27. A.L. Berezina et al.: Decomposition Morphology and Kinetics in an Al-Sc Alloy, Phys. Metals 10 (1990) 296-304

  28. A.L. Berezina et al.: The Influence of Scandium on the Kinetics and Morphology of Decomposition of Alloys of the Al-Li System, Phys. Met. Metall. 71 (2) (1991) 167-175

  29. A.L. Berezina, V.A. Mel'nikova, T.A. Monastyrskaya, A.D. Rud' and K.V. Chuistov: The Effect of Sc on the Stabilization of Metastable Phases during Aging of As-Cast Al-(10-14)%Mg Alloys, Met. Phys. Adv. Tech. 15 (1) (1995) 97-101

  30. A.L. Berezina, K.V. Chuistov, N.I. Kolobnev, L.B. Khokhlatova and T.A. Monastyrskaya: Sc in Aluminum Alloys, Mater. Sci. Forum 396-402 (2002) 741-746

  31. A.L. Berezina, U. Schmidt, T.A. Monastyrskaya, K.V. Chuistov, A.V. Kotko and N.I. Kolobnev: Structural State and Decomposition Kinetics in Rapidly Quenched Al-Sc, Al-Mg-Sc Alloys, Mater. Sci. Forum 396-402 (2002) 763-768

  32. A.L. Beresina, N.I. Kolobnev, K.V. Chuistov, A.V. Kotko and O.A. Molebny: Coherent Composite Phases Formation in Aged Al-Li Base Alloys, Mater. Sci. Forum 396-402 (2002) 977-981

  33. A.S. Berger, R.W. Siegel: Vacancy-Scandium Interaction in Quenched Copper, J. Phys. F 9 (1979) L67-L71
    Abstract

  34. A.S. Berger: Determination of the Electrical Resistivity of Scandium in Aluminum, J. Less-Common Met. 71 (1980) 119-126

  35. C. Berthier, M. Minier: Quadrupolar Nuclear Resonance Investigation of Conduction Electrons Charge Density Around a Scandium Impurity in an Aluminium Matrix, J. Phys. F 3 (1973) 1268-1273
    Abstract

  36. G. Bester and M. Fähnle: Interpretation of Ab Initio Total Energy Results in a Chemical Language: II. Stability of TiAl3 and ScAl3, J. Phys., Condens. Matter 13 (2001) 11551-11565
    Abstract

  37. M.J. Birt et al.: The Fracture Resistance of 1420 and 1421 Al-Mg-Li Alloys, Scripta Metall. Mater. 28 (1993) 919-923

  38. N. Blake, M.A. Hopkins: Constitution and Age Hardening of Al-Sc Alloys, J. Mater. Sci. 20 (1985) 2861-2867

  39. J.J. Blandin and W. Beck: Status and Activities of European and International SPF-Groups, Proc. Materials Week 2001 October 1-4 2001, Munich, Germany
    Abstract

  40. A.A. Bondarev: Electron Beam Welding of High-Strength Aluminium Alloys, Paton Weld. J. (7) (1999) 50-53

  41. E.L. Bradley, III et al.: Superplastic Properties of an Al-2.4Mg-1.8Li-0.5Sc Alloy, Scripta Metall. Mater. 25 (1991) 717-721

  42. A.G. Bratukhin et al.: Structure and Mechanical Properties of Welded Joints in Aluminium- Lithium Alloys in Welding with Experimental Fillers with Scandium, Paton Weld. J. 5 (1993) 717-721

  43. A.G. Bratukhin et al.: RSR Alloys, Sc-bearing Aluminium Alloys and Aluminium Matrix Composites Applied to Making Aerospace Permanent Joints, Welding in the World 33 (1994) 435

  44. A.G. Bratuhin et al.: Aluminium Casting Alloys for Wrought Welded Assemblies for Aviation Purposes, Welding in the World 33 (1994) 436-439

  45. A.G. Bratukhin et al.: Advanced Cast Aluminium Alloys for Cast and Deformed Welded Structures for Aviation Technology, Weld. Inter. 9 (1995) 897-899

  46. A.G. Bratukhin et al.: Prospects for Using Aluminium-Lithium Alloys for Stamped-Welded Aviation Structures, Weld. Inter. 11 (1997) 70-74

  47. R. Braun, B. Lenczowski and G. Tempus: Effect of Thermal Exposure on the Corrosion Properties of an Al-Mg-Sc Alloy Sheet, Mater. Sci. Forum 331-337 (2000) 1647-1652

  48. I.G. Brodova, O.A. Chikova, I.V. Polents, P.S. Popel' and V.O. Esin: Effect of Metastable Heterogeneity of Liquid Metallic Solutions on the Structure of Cast Aluminium Alloys, Casting Processes 1 (2) (1992) 158-160

  49. I.G. Brodova et al.: Structural Investigations of Rapidly Crystallized Al-Sc Alloys, Melts 4 (1992) 392-397

  50. I.G. Brodova, D.V. Bashlikov and I.V. Polents: Influence of Heat Time Melt Treatment on the Structure and the Properties of Rapidly Solidified Aluminum Alloys with Transition Metals, Mater. Sci. Forum 269-272 (1998) 589-594

  51. Y.G. Bushuev, V.E. Sylis and E.V. Shulgina: Aluminium and Scandium Alloys: Research and Testing in Space Technology, Russ. Space Bull. 3 (3) (1996) 19-21

  52. G. Cacciamani, P. Riani, G. Borzone, N. Parodi, A. Saccone, R. Ferro, A. Pisch and R. Schmid-Fetzer: Thermodynamic Measurements and Assessment of the Al-Sc System, Intermetallics 7 (1999) 101-108

  53. J.F. Cannon and H. Tracy Hall: Effect of High Pressure on the Crystal Structures of Lanthanide Trialuminides, J. Less-Common Met. 40 (1975) 313-328
    Online Article

  54. M.C. Carroll, M.J. Mills, G.S. Daehn, P.I. Gouma, M.F. Savage and B.R. Dunbar: Effects of Minor Sc and Zr Additions on Commercial Al-Mg-Mn Alloys, Automotive Alloys 1999, ed. S. Das, TMS (2000) 239-246
    Abstract

  55. S. Celotto and T.J. Bastow: 45Sc Nuclear Magnetic Resonance Analysis of Precipitation in Dilute Al-Sc Alloys, Phil. Mag. A 80 (2000) 1111-1125
    Abstract

  56. D.J. Chakrabarti et al.: Superplastic Aluminum Products and Alloys, US Patent 5 055 257, Oct. 8 1991

  57. P.P. Chattopadhyay, S. Datta and M.K. Banerjee: On the Formation of V-Phase in Mechanically Alloyed AlSiMg-SiCp Metal Matrix Composites with Trace Scandium Additions, Mater. Sci. Eng. A333 (2002) 67-71

  58. G.M. Cheldieva et al.: Formation and Decomposition of Metastable Phases in Aluminum Alloys, Russ. Metall. (6) (1990) 87-90

  59. V.V. Cherkasov et al.: Special Features of the Structure Formation and Properties of Castable Al-Mg Alloys Alloyed with Scandium, Met. Sci. & Heat Tr. (6) (1996) 268-270

  60. M.G. Chu and G.J. Hildeman: Aluminum Products Containing Supersaturated Levels of Dispersoids, US Patent 6 004 506, Dec. 21 1999
    Available Online

  61. M.G. Chu and G.J. Hildeman: Supersaturated Aluminium Alloy, European Patent EP 1 111 079 A1, June 27 2001

  62. V.N. Chudin: Fabrication of Sheet Radiators by Shaping - Diffusion Bonding - Brazing, Weld. Inter. 11 (1997) 478-480

  63. J.P. Collin: Alliage d'Aluminium à Hautes Teneurs en Scandium et Procédé de Fabrication de cet Alliage, French Patent FR 2 717 827, Sept. 29 1995
    Available Online

  64. F. Costello: Fine Grains from Ukraine's Scandium Stores, Mater. World (9) (2000) 23-24

  65. F.A. Costello, J.D. Robson and P.B. Prangnell: The Effect of Small Scandium Additions to AA7050 on the As-Cast and Homogenized Microstructure, Mater. Sci. Forum 396-402 (2002) 757-762

  66. D. Cousineau, M. Sahoo, P.D. Newcombe, T. Castles and F.A. Fasoyinu: Grain Refinement of Aluminum Alloy 356.0 with Scandium, Zirconium, and a Combination of Titanium and Boron, Proc. AFS 105th Casting Congress, Apr. 28 - May 1 2001, Dallas, Texas, USA 157-184

  67. C.E. Cross and Ø. Grong: Microstructure and Mechanical Properties of Simulated Al-Mg-Zn Weld Metal Modified with Sc and Zr, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 1441-1446

  68. V.G. Davydov et al.: On Prospects of Application of New 01570 High-Strength Weldable Al-Mg-Sc Alloy in Aircraft Industry, Mater. Sci. Forum 217-222 (1996) 1841- 1846

  69. V.G. Davydov et al.: Alloying Aluminum Alloys with Scandium and Zirconium Additives, Met. Sci. & Heat Tr. (8) (1996) 347-352

  70. V.G. Davydov, L.B. Ber, V.N. Ananiev, A.I. Orozov and M.V. Samarina: The Heat Treatment Effect on Thermal Stability of Al-Li Alloys at Low Temperatures, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 985-990

  71. V.G. Davydov, T.D. Rostova, V.V. Zakharov, Yu.A. Filatov and V.I. Yelagin: Scientific Principles of Making an Alloying Addition of Scandium to Aluminium Alloys, Mater. Sci. Eng. A 280 (2000) 30-36

  72. V.G. Davydov, L.B. Ber, E.Ya. Kaputkin, V.I. Komov, O.G. Ukolova and E.A. Lukina: TTP and TTT Diagrams for Quench Sensitivity and Ageing of 1424 Alloy, Mater. Sci. Eng. A 280 (2000) 76-82

  73. V.G. Davydov, J.N. Fridlyander, M.V. Samarina, A.I. Orozov, L.B. Ber, V.I. Yelagin, R. Lang and T. Pfannenmüller: The Heat Treatment of Al-Cu-Li Alloys Ensured the Stability of Structure and Properties at Long Low Temperature Exposure, Mater. Sci. Forum 331-337 (2000) 1049-1054

  74. V.G. Davydov, L.B. Ber and V.I. Komov: The TTT and TTP Diagrams of Commercial Aluminum Alloys Used for Quenching Cooling and Ageing Regimes Optimization, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 219-228

  75. A.M. Diskin et al.: Superplasticity of Alloy of the Al-Cu-Mg System with Additions of Transition Metals (Summary), Sov. Non-Ferrous Met. Res. 14 (1986) 499- 500

  76. G. Dlubek et al.: Positron Annihilation Studies of Decomposition in Al-Li Based Alloys, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 63-68

  77. G. Dlubek, S. Krause, H. Krause, A. L. Beresina, V. S. Mikhalenkov and K. V. Chuistov: Positron Studies of Precipitation Phenomena in Al-Li and in Al-Li-X (X=Cu, Mg or Sc) alloys, J.Phys.: Condens. Matter 4 (1992) 6317-6328
    Abstract

  78. S.V. Dobatkin, V.V. Zakharov and R.Z. Valiev: Nanostructures in Al-Based Alloys After Severe Plastic Deformation, Proc. First Joint International Conference on Recrystallization and Grain Growth, Eds. G. Gottstein and D.A. Molodov, August 27-31 2001, Aachen, Germany, Publ. by Springer Verlag, 2001 509-514

  79. S.V. Dobatkin: Grain Refinement and Phase Transformations in Al and Fe Based Alloys During Severe Plastic Deformation, Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 183-192
    Abstract

  80. V.I. Dobatkin and G.I. Eskin: Relationships Governing Modification and Nondendritic Solidification of Light Alloys, Casting Processes 1 (1) (1992) 24-28

  81. T.V. Dobatkina et al.: Section of the Isothermal Tetrahedron of the Al-Mg, Li-Sc System in the Aluminum-Rich Region, Russ. Metall. (5) (1992) 125-127

  82. M.S. Domack and D.L. Dicus: Evaluation of Sc-Bearing Aluminum Alloy C557 for Aerospace Applications, Mater. Sci. Forum 396-402 (2002) 839-844

  83. L.M. Dougherty, I.M. Robertson, and J.S. Vetrano: A TEM Study of Dynamic Continuous Recrystallization in a Superplastic Al-4Mg-0.3Sc Alloy Mat. Res. Soc. Symp. Proc. 601 (2000) 25-30

  84. L.M. Dougherty, I.M. Robertson, J.S. Vetrano and S.M. Bruemmer: A Microstructural Study of the Effect of Particle Aging on Dynamic Continuous Recrystallization in Al-4Mg-0.3Sc, Mater. Sci. Forum 357-359 (2001) 93-98

  85. A.M. Drits, B.A. Kopeliovich: Influence of Fine Transition-metal Particles and Grain Structure on Fracture Behavior of Al-Cu-Mg Alloys, Russ. Metall. (4) (1985) 147-151

  86. A.M. Drits, T.V. Krymova: 1460 High-Strength Weldable Aluminum-Lithium Alloy, Russ. J. Non-Ferrous Met. 37 (3) (1996) 65-72

  87. M.E. Drits et al.: Scandium-Aluminium Interactions in the Aluminium-rich Side of the Al-Sc System, Russ. Metall. (4) (1973) 152-154

  88. M.E. Drits et al.: Effect of Alloying on the Strength Characteristics and Weldability of Aluminum Foil, Met. Sci. & Heat Tr. (3) (1979) 215-216

  89. M.E. Drits et al.: Effect of REM on the Mechanical Properties of Aluminum Alloys Containing 6.5% Mg, Met. Sci. & Heat Tr. (10) (1980) 743-745

  90. M.E: Drits et al.: Mechanism of the Influence of Scandium in Increasing the Strength and Thermal Stability of Alloys in the Al-Mg System, Sov. Phys. Dokl. 26 (3) (1981) 344-346

  91. M.E. Drits et al.: Recrystallization of Al-Sc Alloys, Russ. Metall. (1) (1982) 148-152

  92. M.E. Drits et al.: Alloy Al-Sc Age-Hardening Kinetics, Diffusion in Metals and Alloys, August 30-September 3 1982, Tihany, Hungary 616-623

  93. M.E. Drits et al.: Homogenization of Alloys in the System Al-Mg-Sc, Met. Sci. & Heat Tr. (7) (1983) 550-554

  94. M.E. Drits et al.: Metastable State Diagram of the Al-Sc System in the Range Rich in Aluminium, Russ. Metall. (1) (1983) 150-153

  95. M.E. Drits et al.: The Alloying of 01420 Alloy with Scandium, Sov. Non-Ferrous Met. Res. 11 (1983) 248-251

  96. M.E. Drits et al.: The Effect of Solution Treatment on the Ageing Processes of Al-Sc Alloys, Crystal Res. & Technol. 19 (1984) 1325-1330

  97. M.E. Drits et al.: Ageing of Alloy Al-0.3 at.% Sc, Phys. Met. Metall. 57 (6) (1984) 118-126

  98. M.E. Drits et al.: The Effects of Homogenizing Heating on the Properties of Alloys in the Al-Sc and Al-Mg-Sc Systems, Russ. Metall. (3) (1984) 192-195

  99. M.E. Drits et al.: Nature of Physicochemical Interactions in the Aluminum-Rich Corner of the Al-Sc-Mn System, Russ. Metall. (4) (1984) 229-232

  100. M.E. Drits et al.: Some Properties of the Al3Sc Phase, Sov. Non-Ferrous Met. Res. 12 (1984) 83-85

  101. M.E. Drits et al.: Effect of ScAl3 Phase Dispersity on Hardening of Al-6.3% Mg-0.21% Sc Alloy, Met. Sci. & Heat Tr. (4) (1985) 309-312

  102. M.E. Drits et al.: Effect of the Degree of Dispersion of ScAl3 Phase Segregations on the Recrystallisation of Al-Sc Alloys, Sov. Non-Ferrous Met. Res. 13 (1985) 309-314

  103. J.B. Dunlop: Phonon Resistivities of Dilute Transition Metal Compounds, Solid State Comm. 15 (1974) 13-17

  104. J.B. Dunlop, G. Grüner and A.D. Caplin: Dilute Intermetallic Compounds II Properties of Aluminium Rich Aluminium-Transition Metal Phases, J. Phys. F 4 (1974) 2203-2217
    Abstract

  105. J. Dutkiewicz et al.: Effect of Scandium on the Decomposition of Aluminium-Zinc Alloys, J. Mater. Sci. 27 (1992) 3032-3035

  106. J. Dutkiewicz et al.: Evolution of Precipitates in AlLiCu and AlLiCuSc Alloys after Age-Hardening Treatment, Mater. Sci. Eng. A234-236 (1997) 253-257

  107. V.I. Elagin et al.: Some Features of Decomposition for the Solid Solution of Scandium in Aluminum, Met. Sci. & Heat Tr. (7) (1983) 546-549

  108. V.I. Elagin et al.: Influence of Scandium on the Structure and Properties of Al-Zn-Mg Alloys, Russ. Metall. (4) (1983) 143-146

  109. V.I. Elagin et al.: Influence of Zirconium Additions on Ageing of Al-Sc Alloys, Phys. Met. Metall. 60 (1) (1985) 88-92

  110. V.I. Elagin et al.: Scandium-alloyed Aluminum Alloys, Met. Sci. & Heat Tr. (1) (1992) 37-45

  111. V.I. Elagin et al.: Some Features of the Cast Structure of Alloys of the Al-Sc System, Met. Sci. & Heat Tr. (6) (1993) 317-319

  112. V.I. Elagin et al.: Effect of Scandium on the Structure and Properties of Alloy Al-5.5Zn- 2.0Mg, Met. Sci. & Heat Tr. (7) (1994) 375-380

  113. R.P. Elliott, F.A. Shunk: The Al-Sc (Aluminum-Scandium) System, Bull. Alloy Phase Diagrams 2 (2) (1981) 222-223

  114. R.A. Emigh et al.: Superplastic Studies in the Al-Li-Sc-Mg System, Superplasticity in Aerospace II, Eds. T.R. McNelley and H.C. Heikkenen, The Minerals, Metals & Materials Society, 1990 303-315

  115. R.A. Emigh, E.L. Bradley and J.W. Morris, Jr.: The Al-Sc-Li-Mg System as a Potential Source of Superplastically Formable Alloys, Light-Weight Alloys for Aerospace Applications II, Eds. E.W. Lee and N.J. Kim, The Minerals, Metals & Materials Society, 1991 27-43

  116. O. Engler and G. Tempus: On the Influence of Scandium on the Recrystallization Behaviour of Al-Mg Alloys, Proceedings of ICOTOM 11, September 16-20 1996, China

  117. V.N. Eremenko et al.: Phase Equilibria in the Scandium-Silicon System, Soviet Powder Met. & Met. Cer. 27 (1989) 967-972

  118. D.G. Eskin: The Effect of Alloying Additives on Structure and Properties of Cast Al-Cu-Si- Mg Alloys, Z. Metallkd. 86 (1995) 60

  119. G.I. Éskin: New Light Alloys and Efficient Technologies for Making Them, Metallurgist 46 (2) (2002) 39-41

  120. F.A. Fasoyinu, M. Sahoo and R.G. Davies: Grain Refinement of Aluminum Alloy 356.0 with Scandium, Zirconium and a Combination of Titanium and Boron, Proc. Light Metals 2000, Eds. J. Kazadi and J. Masounave, August 20-23, 2000, Ottawa, Ontario, Canada 241-271

  121. F.A. Fasoyinu, J. Thomson, D. Cousineau, T. Castles and M. Sahoo: Grain Refinement and Thermal Analysis of Al-Mg Alloy 535, Proc. 6th International AFS Conference on Molten Aluminum Processing, Nov. 11-13 2001, Orlando, Florida, USA

  122. V.A. Fedoseev, V.I. Ryazantsev: Mechanical Properties of Welded Joints in New Deformable Aluminium Alloys, Weld. Inter. 9 (1995) 231-233

  123. M.T. Fernandes and R.C. Dorward: Aluminum-Magnesium-Scandium Alloys with Zinc and Copper, US Patent 6 139 653, Oct. 31 2000
    Available Online

  124. Yu.A. Filatov: Weldable Aluminium-Magnesium-Scandium System Base Alloys, Welding in the World 33 (1994) 428-429

  125. Yu.A. Filatov: Deformable Al-Mg-Sc Alloys and Possible Regions of Their Application, J. Adv. Mater. 2 (1995) 386-390
    Abstract

  126. Yu.A. Filatov: Deformable Alloys Based on the Al-Mg-Sc System, Met. Sci. & Heat Tr. (6) (1996) 271-274

  127. Yu.A. Filatov: Wrought Alloys of the Al-Mg-Sc System and their Application Prospects in Automobile Manufacturing, Russ. J. Non-Ferrous Met. 38 (2) (1997) 47-49

  128. Yu.A. Filatov, V.I. Yelagin and V.V. Zakharov: New Al-Mg-Sc Alloys, Mater. Sci. Eng. A 280 (2000) 97-101

  129. B.M. Freidin, Yu.V. Kuz'mich, I.G. Kolesnikova, V.I. Serba and S.G. Khayutin: Manufacture of Aluminum-base Compositions by Mechanical Alloying, Russ. J. Non-Ferrous Met. 41 (10) (2000) 57-62

  130. I.N. Fridlyander: Aluminium-Lithium Weldable Alloy 1420 (Alloying System Al-Li-Mg-Zr), Proceedings of the Fifth International Aluminium-Lithium Conference, March 27-31 1989, Williamsburg, Virginia, USA 1359-1364

  131. I.N. Fridlyander, V.S. Sandler and T.I. Nikol'skaya: Dispersoids in Deformed Aluminum Alloys containing Lithium, Met. Sci. & Heat Tr. 32 (6) (1990) 466-468

  132. I.N. Fridlyander et al.: Possibility of Creating Weldable Alloys on the Basis of the System Al-Cu-Li, Met. Sci. & Heat Tr. (9) (1991) 695-699

  133. I.N. Fridlyander et al.: Soviet Al-Li Alloys for Aerospace Application, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch- Partenkirchen, Germany, 35-42

  134. I.N. Fridlyander et al.: The Effect of Scandium on Decomposition Kinetics in Aluminium- Lithium Alloys, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 107-112

  135. I.N. Fridlyander et al.: Structure and Properties of Al-Li Alloys Alloyed with Scandium, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 381-386

  136. I.N. Fridlyander et al.: Fatigue Strength of Al-Cu-Li Alloy at Temperature 293-4 K, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 615-620

  137. I.N. Fridlyander et al.: The Peculiarities of Grain Structure of Aluminium-Lithium Alloys, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 867-871

  138. I.N. Fridlyander et.al.: High-Strength Weldable 1460 Alloy for Cryogenic Application, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 1245-1250

  139. I.N. Fridlyander et al.: Investigation of the Phase Equilibria in Aluminum Alloys Containing Lithium, Met. Sci. & Heat Tr. (10) (1993) 567-571

  140. I.N. Fridlyander et al.: Grain Structure and Superplasticity of High Strength Al-Zn-Mg-Cu Alloys with Different Minor Additions, Mater. Sci. Forum 170-172 (1994) 345-349

  141. J. Fridlyander: Advanced Russian Aluminum Alloys, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. II, Atlanta, Georgia, USA 80-87

  142. J.N. Fridlyander, O.G. Senatorova: Development and Application of High-Strength Al-Zn- Mg-Cu Alloys, Mater. Sci. Forum 217-222 (1996) 1813-1818

  143. J.N. Fridlyander et al.: Alloying Components Optimization of Weldable Al-Li-Mg Alloy, Mater. Sci. Forum 217-222 (1996) 1847-1851

  144. J.N. Fridlyander et al.: Advanced Weldable Damage Tolerant AlMgLi Alloy for Aircraft Application, Mater. Sci. Forum 242 (1997) 249-254

  145. I.N. Fridlyander, L.L. Rokhlin, T.V. Dobatkina, V.V. Kinzhibalo and A.T. Tyvanchuk: Phase Diagram of the Al-Li-Sc System, Russ. Metall. (1) (1998) 161-166

  146. J.N. Fridlyander and W. Bozich: The Properties of Semiproducts of 1460 Alloy (Al-Cu-Li-Sc) and 1421 Alloy (Al-Mg-Li-Sc) at 293K and 77K, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 937-941

  147. J.N. Fridlyander, N.I. Kolobnev, L.B. Khokhlatova, E. Loechelt, P.-J. Winkler and T. Pfannenmuller: Properties of New Al-Li-Mg Alloy, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 2055-2058

  148. J.N. Fridlyander, N.I. Kolobnev, L.B. Khokhlatova, L.V. Tarasenko and I.P. Zhegina: Study of the Structure and Properties of 1420 Alloy Modifications for Sheets, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 2059-2063

  149. J.N. Fridlyander, N.I. Kolobnev, L.B. Khokhlatova, A.L. Berezina, A.V. Katko, A. Haszler and C. Keidel: Texture and Grain Structure of Al-Li-Mg-Zr-Sc Alloy Sheets, Mater. Sci. Forum 331-337 (2000) 867-870

  150. I.N. Fridlyander: Russian Aluminum Alloys for Aerospace and Transport Applications, Mater. Sci. Forum 331-337 (2000) 921-926

  151. J.N. Fridlyander, N.I. Kolobnev, L.B. Khokhlatova, K.-H. Rendigs, G. Tempus, A. Haszler, C. Keidel, T. Pfannenmüller and A.L. Berezina: Structure and Properties of Sheets of 1424 Alloy, Mater. Sci. Forum 331-337 (2000) 1393-1398

  152. I.N. Fridlyander: Aluminum Alloys in Aircraft in the Periods of 1970 - 2000 and 2001 - 2015, Met. Sci. & Heat Tr. 43 (1) (2001) 6-10

  153. J.N. Fridlyander, L.B. Khokhlatova, N.I. Kolobnev, L.B. Ber, E.I. Shvechkov, K.-H. Rendigs and G. Tempus: Development of Thermally Stabilized 1424 Aluminium-Lithium Alloy for Welded Fuselage Applications, Proc. Materials Week 2001 October 1-4 2001, Munich, Germany
    Abstract

  154. I.N. Fridlyander, L.B. Khokhlatova, N.I. Kolobnev, K. Rendiks and G. Tempus: Thermally Stable Aluminum-Lithium Alloy 1424 for Application in Welded Fuselage, Met. Sci. & Heat Tr. 44 (1) (2002) 3-8
    Abstract

  155. J.N. Fridlyander, L.B. Khokhlatova, N.I. Kolobnev, E.I. Shvechkov, I.P. Zhegina, S.A. Karimova, K.-H. Rendigs and G. Tempus: Influence of Environment and Load Frequency on Fatigue Crack Propagation of 1424 Al-Mg-Li Alloy, Mater. Sci. Forum 396-402 (2002) 1273-1278

  156. A.S. Fridman et al.: Cross Section of Isothermal Tetrahedron of the Al-Mg-Sc-Zr System at 500C in the Aluminum-rich Region, Russ. Metall. (1) (1992) 207-209

  157. C.L. Fu: Electronic, Elastic and Fracture Properties of Trialuminide Alloys: Al3Sc and Al3Ti, J. Mater. Res. 5 (5) (1990) 971-979
    Abstract

  158. C.L. Fu and M.H. Yoo: Fundamentals of Mechanical Behavior in Intermetallic Compounds - A Synthesis of Atomistic and Continuum Modelling, Ordered Intermetallics - Physical Metallurgy and Mechanical Behavior, eds. C.T. Liu, R.W. Cahn and G. Sauthoff, 23-28 June 1991, Irsee, Germany 155-164

  159. H. Fujii, M. Sugamata, J. Kaneko and M. Kubota: Effect of Sc Addition on Rapidly Solidified Al-Transition Metal Alloys, Mater. Sci. Forum 396-402 (2002) 245-250

  160. S.-I. Fujikawa et al.: Solid Solubility and Residual Resistivity of Scandium in Aluminum, J. Less-Common Met. 63 (1979) 87-97

  161. S.-I. Fujikawa: Impurity Diffusion of Scandium in Aluminum, Defect and Diffusion Forum 143-147 (1997) 115-120

  162. S.-I. Fujikawa and S. Sakauchi: Kinetics of Precipitation in Al-0.20 mass% Sc Alloys, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 805-810

  163. S.-I. Fujikawa: Scandium in Pure Aluminum and Aluminum Alloys - Its Behavior and Addition Effects, J. Japan Inst. Light Metals 49 (1999) 128-144

  164. T. Fujita, Z. Horita and T.G. Langdon: Diffusion in Fine-Grained Al Alloys Having Low and High Angle Grain Boundaries, Mater. Sci. Forum 396-402 (2002) 1061-1066

  165. K. Fukunaga et al.: Temperature Dependence of Dislocation Dissociation Mode in L12 Trialuminides, Mater. Sci. Eng. A 234-236 (1997) 594-597

  166. K. Fukunaga et al.: Temperature Dependence of Dislocation Structure of L12-Al3Sc, Mater. Sci. Eng. A 239-240 (1997) 202-205

  167. K.-I. Fukunaga and Y. Miura: Electron Microscopic Analysis of Dislocation Structures in L12-Al3Sc Intermetallic Compound, J. Japan Inst. Metals 62 (1998) 369-376

  168. C.B. Fuller, D.N. Seidman and D.C. Dunand: Creep Properties of Coarse-Grained Al(Sc) Alloys at 300C, Scripta Mater. 40 (1999) 691-696
    Online Article

  169. M. Furukawa, Z. Horita, M. Nemeto and T.G. Langdon: The Relationship Between Microstructural Stability and Superplasticity in Aluminum Alloys Processed by Equal-Channel Angular Pressing, Proc. Light Metals 1999, Eds. M. Bouchard and A. Faucher, August 22-26, 1999, Quebec City, Quebec, Canada 583-592

  170. M. Furukawa, K. Oh-ishi, S. Komura, A. Yamashita, Z. Horita, M. Nemeto and T.G. Langdon: Optimization of Microstructure for Superplasticity Using Equal-Channel Angular Pressing, Mater. Sci. Forum 304-306 (1999) 97-102

  171. M. Furukawa, A. Utsunomiya, K. Matsubara, Z. Horita and T.G. Langdon: Influence of Magnesium on Grain Refinement and Ductility in a Dilute Al-Sc Alloy, Acta Mater. 49 (2001) 3829-3838

  172. M. Furukawa, A. Utsunomiya, S. Komura, Z. Horita, M. Nemoto and T.G. Langdon: Optimization for Superplasticity in Ultrafine-Grained Al-Mg-Sc Alloys Using Equal-Channel Angular Pressing, Mater. Sci. Forum 357-359 (2001) 431-436

  173. M.Furukawa, Z.Horita and T.G.Langdon: The Principles of Processing Using Severe Plastic Deformation: Applications to Aluminum Alloys, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 47-56

  174. M. Furukawa, Z. Horita and T.G. Langdon: Developing Superplasticity at High Strain Rates Through ECAP Processing, Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 459-468
    Abstract

  175. I.N. Ganiev et al.: Anodic Behavior of Alloys in the Systems Aluminum-Scandium(Yttrium, Praseodymium, Neodymium) in a Neutral Medium, J. Applied Chem. USSR 60 (1986) 1961-1965

  176. I.N. Ganiev: High-Temperature and Electrochemical Corrosion of Aluminum-Scandium Alloys, Protection of Metals 31 (1995) 543-546

  177. I.N. Ganiev et al.: Phase Diagram of Al-Zn-Al2Sc System, Russ. Metall. (3) (1995) 125-127

  178. I.N. Ganiev, M.M. Khakdodov and A.É. Berdiev: Ternary Phase Diagrams of Aluminum with Rare Earth Metals, Met. Sci. & Heat Tr. 44 (2) (2002) 54
    Abstract

  179. Y. Gao, W. Wu, G. Feng, S. Xu and X. Ruan: Positron Annihilation Lifetime Analysis of 8090 Alloy with Doping Zn, Ag or Sc under Cryogenic Temperatures, Acta Metall. Sin. 31 (2) (1995) 91-96

  180. S.V. Gavrilin: Evaluation of the Cracking Resistance of Welded Joints in Welding Alloys of the Al-Zn-Mg System Using Experimental Filler Wires, Paton Weld. J. 10 (1998) 202-204

  181. E.P. George, J.A. Horton, W.D. Porter and J.H. Schneibel: Brittle Cleavage of L12 Trialuminides, J. Mater. Res. 5 (8) (1990) 1639-1648
    Abstract

  182. E.P. George et al.: Deformation and Fracture of L12 Trialuminides, ISIJ International 31 (1991) 1063-1075

  183. V.Y. Gertsman, J.S. Vetrano, C.H. Henager,Jr., and S.M. Bruemmer: EBSD Study of Microstructure Evolution in Model Aluminum Alloys During Anealing and High-Temperature Deformation, Proc. First Joint International Conference on Recrystallization and Grain Growth, Eds. G. Gottstein and D.A. Molodov, August 27-31 2001, Aachen, Germany, Publ. by Springer Verlag, 2001 837-842

  184. A. Gholina, S.I. Hulley and P.B. Pragnell: The Development of an Ultra-Fine Isotropic Grain Structure During the Processing of Spray Formed Al-Li-X Alloys, Proceedings of ReX'96, the Third International Conference on Recrystallization and Related Phenomena, October 21 -24 1996, Monterey, California, USA 537-544

  185. A. Gholina and P.B. Pragnell: Cast Microstructure and Dispersoid Formation in Spray Deposited Al-Li Alloys, Mater. Sci. Techn. 15 (1999) 328-336
    Abstract

  186. A. Gholina, J. Sarkar, P.J. Withers and P.B. Pragnell: Ultrafine Grain Structures Formed by Thermomechanical Processing of Spray Cast Al-Li Alloys, Mater. Sci. Techn. 15 (1999) 605-615
    Abstract

  187. S.V. Golubev et al.: Effect of Viscosity and Electrical Resistance of the Structural State of Al-Sc Melts and the Structure of the Cast Metal, Russ. Met. (1) (1991) 44-49

  188. R. Grimes, R.J. Dashwood and H.M. Flower: High Strain Rate Superplastic Aluminium Alloys: The Way Forward?, Mater. Sci. Forum 357-359 (2001) 357-362

  189. J. Gröbner, R. Schmid-Fetzer, A. Pisch, G. Cacciamani, P. Riani, N. Parodi, G. Borzone, A. Saccone and R. Ferro: Experimental Investigations and Thermodynamic Calculation in the Al-Mg-Sc System, Z. Metallkd. 90 (1999) 872-880

  190. K.A. Gschneider, Jr., F.W. Calderwood: The Al-Sc (Aluminum-Scandium) System, Bull. Alloy Phase Diagrams 10 (1) (1989) 34-36

  191. H.-J. Gudladt, P. Nagy: The Cyclic Crack Propagation Behaviour of a Hardenable Polycrystalline Al-Mg-Sc Alloy, Mater. Sci. Forum 13/14 (1987) 407-412

  192. Y. Harada and D.C. Dunand: Creep Properties of Al3Sc and Al3(Sc, X) Intermetallics, Acta Mater. 48 (2000) 3477-3487

  193. E. Hashimoto et al.: Thermomigration of Scandium in Aluminum, Jap. J Appl. Phys. 18 (1979) 881-887

  194. J.B. Hedrick: Rare-Earth Metal Prices in the USA ca. 1960 to 1994, J. Alloys & Compounds 250 (1997) 471-481

  195. A. Heinz, A. Haszler, C. Keidel, S. Moldenhauer, R. Benedictus and W.S. Miller: Recent Development in Aluminium Alloys for Aerospace Applications, Mater. Sci. Eng. A 280 (2000) 102-107

  196. C.H. Henager, Jr., J.S. Vetrano, V.Y. Gertsman and S.M. Bruemmer: Effect of Sn Additions on Superplasticity in Al-Mg-Mn-Sc Alloys, Mat. Res. Soc. Symp. Proc. 601 (2000) 323-328

  197. K. Higashi: Recent Advances and Future Directions in Superplasticity, Mater. Sci. Forum 357-359 (2001) 345-356

  198. K.-I. Hirano: Studies on Age-Hardenable Aluminium Alloys by Atom-Probe Field-Ion Microscope, Bull. Mater. Sci. 12 (1989) 313-323

  199. A. Hoelzl, H. Kaufmann and V. Konkevich: Semi-Solid Casting of Aluminium - Scandium (Zr) Foundry Alloys, Proc. Automotive and Transportation Technology Congress and Exposition (ATTCE 2001), Oct. 2001, Barcelona, Spain, Vol. 4 1-6

  200. Z. Horita, M. Furukawa, K. Oh-ishi, M. Nemoto and T.G. Langdon: Equal-Channel Angular Pressing for Grain Refinement of Metallic Materials, Proc. Fourth International Conference on Recrystallization and Related Phenomena, eds. T. Sakai and H.G. Suzuki, The Japan Institute of Metals, 1999, 301-308

  201. Z. Horita, S. Komura, P.B. Berbon, A. Utsunomiya, M. Furukawa, M. Nemoto and T.G. Langdon: Superplasticity of Ultrafine-Grained Aluminum Alloys Processed by Equal-Channel Angular Pressing, Mater. Sci. Forum 304-306 (1999) 91-96

  202. Z. Horita, M. Furukawa, M. Nemoto, A.J. Barnes and T.G. Langdon: Superplastic Forming at High Strain Rates after Severe Plastic Deformation, Acta Mater. 48 (2000) 3633-3640

  203. Z. Horita, S. Lee, S. Ota, K. Neishi and T.G. Langdon: Equal-Channel Angular Pressing as a Production Tool for Superplastic Materials Mater. Sci. Forum 357-359 (2001) 471-476

  204. Z. Horita, T. Fujinami, K. Sato, S.B. Kang, H.W. Kim and T.G.Langdon: Microstructures and Mechanical Properties of Aluminum Alloys Processed by Equal-Channel Angular Pressing, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 271-275

  205. D.A. Hughes, M.E. Kassner, M.G. Stout and J.S. Vetrano: Metal Forming at the Center of Excellence for the Synthesis and Processing of Advanced Materials, JOM 50 (6) (1998) 16-21
    Online Article

  206. K.B. Hyde, A.F. Norman and P.B. Pragnell: The Growth Morphology and Nucleation Mechanism of Primary L12 Al3Sc Particles in Al-Sc Alloys, Mater. Sci. Forum 331-337 (2000) 1013-1018

  207. K.B. Hyde, A.F. Norman and P.B. Pragnell: The Effect of Cooling Rate on the Morphology of Primary Al3Sc Intermetallic Particles in Al-Sc Alloys, Acta Mater. 49 (2001) 1327-1337

  208. K.B. Hyde, A.F. Norman and P.B. Prangnell: The Effect of Ti on Grain Refinement in Al-Sc Alloys, Mater. Sci. Forum 396-402 (2002) 39-44

  209. R.W. Hyland, Jr., R.C. Stiffler: Determination of the Elastic Constants of Polycrystalline Al3Sc, Scripta Metall. Mater. 25 (1991) 473-477

  210. R.W. Hyland, Jr.: Homogeneous Nucleation Kinetics of Al3Sc in a Dilute Al-Sc Alloy, Metall. Trans. A 23A (1992) 1947-1955

  211. R.W. Hyland, Jr., M. Asta, S.M. Foiles and C.L. Rohrer: Al(f.c.c.):Al3Sc(L12) Interphase Boundary Energy Calculations, Acta Mater. 46 (1998) 3667-3678

  212. K. Ihara and Y. Miura: High Temperature Deformation of Al-Mg and Al-Mg-Sc Alloys, Mater. Sci. Forum 396-402 (2002) 1377-1382

  213. A.Z. Ikromov, I.N. Ganiev and V.V. Kinzhibalo: Equilibrium Phase Diagram of Al-Zn-Sc system at 573 and 773K, Dokl. Akad. Nauk Tadzh. SSR (6) (1990) 391-392

  214. R.V. Ilyushenko et al.: Peculiarities of Weakening of Alloy 1420 (Al-Mg-Li System) in Fusion Welding, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 1251-1256

  215. B. Irving: Scandium Places Aluminum Welding on a New Plateau, Weld. J. 76 (7) (1997) 53-57

  216. R.R. Irving: Welded Aircraft: Its Past was Dismal; Its Future is Exciting, Proc. International Symposium on Metal Welding and Applications, Eds. J.P. Boillot and M. Evrard, August 22-26, 1999, Quebec City, Quebec, Canada 3-20

  217. A.Ya. Ishchenko and T.M. Labur: Weldable Scandium-Containing Aluminium Alloys, Welding and Surfacing Reviews 9 (1998) 1-109

  218. A.Ya. Ishchenko and T.M. Labur: Welding Technology and Properties of Welded Joints in Aluminium-Lithium Alloys (Review), Paton Weld. J. 10 (1998) 360-364

  219. A.Ya. Ishchenko and T.M. Labur: Weldable Aluminium Alloys with Scandium (Review), Paton Weld. J. 10 (1998) 389-392

  220. A.Ya. Ishchenko, V.O. Chapor and M.R. Yavorskaya: Effect of Scandium Additions on Weldability of Alloy of Al-Zn-Mg System, Paton Weld. J. (11) (2000) 15-17
    Abstract

  221. L.I. Ivanov, V.M. Lazorenko, Yu.M. Platov and V.I. Tovtin: Radiation Stability of Aluminum-Magnesium-Scandium System Alloys, Phys. Chem. Mater. Treatment (6) (1989) 496-497

  222. L.L. Ivanov, V.A. Krasnoselov, Yu.M. Platov, V.I. Tovlin, L.S. Toropova and V.K. Shamardin: Effect of Neutron Irradiation on Mechanical Properties of Low-Activated Aluminium-Based Alloys, Phys. Chem. Mater. Treatment (4) (1990) 321-323

  223. L.I. Ivanov et al.: Radiation Resistance and Parameters of Activation of Aluminium- Magnesium-Scandium and Aluminium-Magnesium-Vanadium Alloys Under Neutron Irradiation, J. Nucl. Mater. 191-194 (1992) 1075-1079

  224. S. Iwamura, M. Nakayama and Y. Miura: Coherency between Al3Sc Precipitate and the Matrix in Al Alloys Containing Sc, Mater. Sci. Forum 396-402 (2002) 1151-1156

  225. X.J. Jiang et al.: Effects of Minor Additions on Precipitation and Properties of Al-Li-Cu-Mg- Zr Alloy, Scripta Metall. Mater. 29 (1993) 211-216

  226. X.J. Jiang et al.: Effects of Scandium on the Microstructure and Tensile Behavior of Al-Li- Cu-Mg-Zr Alloy, Advances in Cryogenic Engineering (Materials) 40 (1994) 1369-1376

  227. H.-H. Jo, S.-I. Fujikawa: Kinetics of Precipitation in Al-Sc Alloys and Low Temperature Solid Solubility of Scandium in Aluminium studied by Electrical Resistivity Measurements, Mater. Sci. Eng. A171 (1993) 151-161

  228. C.-H. Joh, T. Katsube, K. Yamada and Y. Miura: Effect of Sc-Addition on the Precipitation Behavior of an Al-Li-Mg-Cu Alloy, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 799-804

  229. C.-H. Joh, K. Yamada and Y. Miura: Effect of Sc-Addition on the Coarsening Behavior of Al3Li Precipitates in Al-Li Alloys, Mater. Trans., JIM 40 (1999) 439-442
    Abstract

  230. C.-H. Joh, K. Yamada and Y. Miura: The Effect of Sc on the Formation and Growth of PFZ in Al-Li Alloys, Mater. Sci. Forum 331-337 (2000) 1037-1042

  231. M.J. Jones and F.J. Humphreys: Interaction of Recrystallization and Precipitation in Binary Aluminium-Scandium Alloys, Proc. First Joint International Conference on Recrystallization and Grain Growth, Eds. G. Gottstein and D.A. Molodov, August 27-31 2001, Aachen, Germany, Publ. by Springer Verlag, 2001 1287-1292

  232. R. Kaibyshev, O. Sitdikov and S. Olenyov: Ultrafine Grain Formation During Equal Channel Angular Extrusion in an Al-Mg-Sc Alloy, Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 65-74
    Abstract

  233. R. Kaibyshev, F. Musin, K. Saytaeva and Y. Motohashi: Formation of Ultrafine Grains During Intense Plastic Straining in an Al-Li Alloy at 400C Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 81-87
    Abstract

  234. L. I. Kaygorodova, V.P. Domashnikov: Investigation of the Influence of Scandium on the Structure and Properties of an Aluminium-Magnesium Alloy during Natural Ageing, Phys. Met. Metall. 68 (4) (1989) 160-166

  235. L.I. Kaygorodova et al.: The Effect of Small Sc and Mg Addition on Al-Li-Cu-Zr Alloy Structure and Mechanical Properties, Proceedings of the Sixth International Aluminium- Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 363-367

  236. L.I. Kaigorodova et al.: Effects of Small Additions of Scandium and Magnesium on the Structure and Properties of Al-Li-Cu-Zr Alloy upon Natural Aging, Phys. Met. Metall. 73 (3) (1992) 281-285

  237. L.I. Kaigorodova et al.: Effects of Small Additions of Magnesium and Scandium on the Structure and Properties of Al-Li-Cu-Zr Alloy upon Artificial Aging, Phys. Met. Metall. 73 (3) (1992) 286-290

  238. L.I. Kaigorodova: Natural Aging of Aluminum-Magnesium Alloys: Stabilization of Properties, Phys. Met. Metall. 78 (5) (1994) 490-496

  239. L.I. Kaigorodova et al.: Effect of Small Additions of Sc and Zr on the Structure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy, Phys. Met. Metall. 81 (1996) 513-519
    Abstract

  240. L.I. Kaigorodova, I.G. Brodova, E.I. Sel'nikhina, and O.R. Shamsheeva: Effect of Small Additions of Sc and Zr on the Fine Structure of an Al-Zn-Mg-Cu Alloy after Rapid Solidification and High-Temperature Annealing, Phys. Met. Metall. 90 (3) (2000) 281-287
    Abstract

  241. K.U. Kainer and R. Unal: Powder Metallurgy Processing and Properties of Al-Mg-Sc Alloys, Proc. 1998 Powder Metallurgy World Congress & Exhibition Oct. 18-22 1998, Granada, Spain, 284-288

  242. A.N. Kamardinkin et al.: Isothermal Sections of the Al-Sc-Zr System at 550 and 600C in the Region Enriched in Aluminum, Russ. Metall. (4) (1991) 216-218

  243. G.M. Khan et al.: Influence of Scandium on Structure and Superplasticity of Al-Zn-Mg-Sc-Zr Alloys, Tsvetnye Metally 34 (11) (1993) 43-45

  244. M.L. Kharakterova, T.V. Dobatkina: Polythermal Sections of the Al-Cu-Sc System, Russ. Metall. (6) (1988) 175-178

  245. M.L. Kharakterova: Phase Composition of Al-Cu-Sc Alloys at Temperatures of 450 and 500C, Russ. Metall. (4) (1991) 195-199

  246. M.L. Kharakterova et al.: Precipitation Hardening in Ternary Alloys of the Al-Sc-Cu and Al- Sc-Si Systems, Acta Metall. Mater. 42 (7) (1994) 2285-2290

  247. M.L. Kharakterova et al.: Effect of Scandium and Zirconium on Structure and Age Hardening of the Al-Mg-Si Alloys, Russ. Metall. (1) (1997) 104-109

  248. G.V. Kharina and V.P. Kochergin: Corrosion of Alloys of Aluminum with Zinc and Rare Earth Metals in Sodium Metavanadate Solutions, Protection of Metals 32 (1996) 134-136
    Abstract

  249. G.V. Kharina and V.P. Kochergin: Corrosion of Aluminum Alloys with Zinc and Rare-Earth Metals in Polyvanadate Solutions, Russ. J. Applied Chem. 69 (1996) 1576-1578

  250. G.V. Kharina, M.V. Kuznetsov and V.P. Kochergin: Mechanism and Kinetics of Anodic Dissolution of Aluminum and its Alloys with Zinc and Rare-Earths in a Sodium Polyvanadate Solution, Russ. J. Electrochem. 34 (1998) 482-485
    Abstract

  251. I.M. Khatsinskaya et al.: The Structure and Phase Transformations in Al-Li-Mg Alloys Containing Zr and Sc, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. II, Atlanta, Georgia, USA 183-190

  252. L.B. Khokhlatova et al.: Ageing Behaviour and Tensile Properties of 1460 Alloy, Mater. Sci. Forum 217-222 (1996) 853-857

  253. L.B. Khokhlatova, L.B. Ber, A.A. Alekseev, N.I. Kolobnev, O.G. Ukolova and E.A. Lukina: Phase Transformation during Long-Term Low Temperature Exposure of 1424 Al-Li-Mg Alloy, Mater. Sci. Forum 396-402 (2002) 1395-1398

  254. V.T. Klimov, I.B. Ginko, V.V. Sadkov, V.V. Kashirin and T.V. Krymova: Use of Aluminum-Lithium Alloys in Airplane Structures of the Tupolev Aviation Scientific and Technical Complex, Russ. J. Non-Ferrous Met. 38 (3) (1997) 70-74

  255. U. Koch et al.: Advanced Weldable High-Strength Al-Cu-Li Alloy for Aerospace Applications, Mater. Sci. Forum 242 (1997) 243-248

  256. O.K. Kolerov et al.: Distinctive Features of Primary Crystallization in Alloy 1570, Met. Sci. & Heat Tr. (12) (1994) 649-654

  257. O.K. Kolerov: Kinetics and Texture of Recrystallization in Aluminum Alloy Sheets of Different Thicknesses, Met. Sci. & Heat Tr. (3) (1997) 94-96

  258. N.I. Kolobnev et al.: Superplasticity of Al-Mg-Li System Alloys, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch- Partenkirchen, Germany, 1053-1056

  259. N.I. Kolobnev et al.: Aluminium-Lithium Alloys Based on the Al-Mg-Li-Zr-Sc System, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. II, Atlanta, Georgia, USA 305-312

  260. N.I. Kolobnev and L.B. Khokhlatova: Multy-Step Ageing Behavior of Al-Li Alloys, Proc. Materials Week 2001 October 1-4 2001, Munich, Germany
    Abstract

  261. S.B. Komarov: Modification of the Structure of Aluminum-Lithium Alloy Ingots, Russ. J. Non-Ferrous Met. 37 (9) (1996) 59-63

  262. S.B. Komarov: Heredity in Aluminum/Lithium Alloy Ingot Production, Russ. J. Non-Ferrous Met. 40 (9) (1999) 60-62

  263. S. Komura, P.B. Berbon, M. Furukawa, Z. Horita, M. Nemoto and T.G. Langdon: High Strain Rate Superplasticity in an Al-Mg Alloy Containing Scandium, Scripta Mater. 38 (1998) 1851-1856

  264. S. Komura, P.B. Berbon, A. Utsunomiya, M. Furukawa, Z. Horita, M. Nemoto and T.G. Langdon: Superplasticity in an Ultrafine-Grained Al-Mg-Sc Alloy Produced by Equal-Channel Angular Pressing, Hot Deformation of Aluminum Alloys II eds. T.R. Bieler, L.A. Lalli and S.R. MacEwen, TMS, USA 1998 125-138

  265. S. Komura, Z. Horita, M. Furukawa, M. Nemoto and T.G. Langdon: Influence of Scandium on Superplastic Ductilities in an Al-Mg-Sc Alloy, J. Mater. Res. 15 (2000) 2571-2576
    Abstract

  266. S. Komura, M. Furukawa, Z. Horita, M. Nemoto and T. G. Langdon: Optimizing the Procedure of Equal-Channel Angular Pressing for Maximum Superplasticity, Mater. Sci. Eng. A 297 (2001) 111-118

  267. S. Komura, Z. Horita, M. Furukawa, M. Nemoto and T.G. Langdon: An Evaluation of the Flow Behavior during High Strain Rate Superplasticity in an Al-Mg-Sc Alloy, Metall. Mater. Trans. A 32A (2001) 707-716
    Abstract

  268. V.I. Kononenko, S.V. Golubev: Phase Diagrams of Binary Systems of Aluminum with La, Ce, Pr, Nd, Sm, Eu, Yb, Sc and Y, Russ. Metall. (2) (1990) 193-195

  269. V. Kotroczo, I.J. McColm: Phases in Rapidly Cooled Scandium-Silicon Samples, J. Alloys & Compounds 203 (1994) 259-265

  270. B.Ya. Kotur, I.R. Mokra: Ternary Systems Sc-Y-Si and Sc-Lu-Si, Inorg. Mater. 30 (1994) 729-732

  271. B.Ya. Kotur: Crystal Chemistry of Ternary Intermetallic Compounds of Scandium with Transition Metals and Carbon, Silicon or Germanium, J. Alloys & Compounds 219 (1995) 88-92

  272. L.S. Kramer et al.: Modification of Aluminum Alloys via Scandium Additions, Proceedings of Alumitech '97, May 19-23 1997, Atlanta, Georgia, USA 1231-1236

  273. L.S. Kramer et al.: Scandium in Aluminum Alloys, Adv. Mater. & Proc. (10) (1997) 23-24
    Abstract

  274. A.R. Krause, R.A. Chernenkoff and R.G. Davies: The Effect of Transition Metals on the Fatigue Response of a 5754 Type Alloy, Proc. Light Metals 1999, Eds. M. Bouchard and A. Faucher, August 22-26, 1999, Quebec City, Quebec, Canada 429-438

  275. A.R. Krause and R.A. Chernenkoff: The Effect of Large Zirconium Additions to a 5754 Alloy, Proc. Light Metals 2000, Eds. J. Kazadi and J. Masounave, August 20-23, 2000, Ottawa, Ontario, Canada 285-294

  276. S. Krause et.al.: Positron Studies of Annealing and Precipitation in Quenched Al-Sc(0.003-6 at%) Alloys, Mater. Sci. Forum 105-110 (1992) 1105-1108

  277. S. Krause et al.: Positron Lifetime Studies of Decomposition in Al-Li and Al-Li-(Cu, Mg or Sc) Alloys, Mater. Sci. Forum 105-110 (1992) 1109-1112

  278. S. Krause et al.: Defect Annealing and Decomposition in Quenched Al-Sc Alloys Studied by Positron Lifetime Measurements, Phys. Stat. Sol. (a) 141 (2) (1994) 311-316

  279. T.M. Labur and R.V. Ilyushenko: Effect of the Composition of Filler Wire on the Failure Resistance of Welded Joints in 01421 Aluminium-Lithium Alloy, Paton Weld. J. 4 (1992) 318-320

  280. T.M. Labur and R.V. Ilyushchenko: Effect of Scandium on the Mechanical Properties of Welded Joints in 1420 Aluminium Alloy, Paton Weld. J. 4 (1992) 630-631

  281. T.M. Labur: Examining the Efficiency of Hardening the Weld Metal with Scandium in Welding 1420 Aluminium-Lithium Alloy, Paton Weld. J. 8 (1996) 391-393

  282. L.K. Lamikhov and G.V. Samsonov: Modification of Aluminum and of Alloy AL7 by Transition Metals, Tsvetnye Metally 5 (8) (1964) 77-80

  283. T.G. Langdon, M. Furukawa, M. Nemoto and Z. Horita: Using Severe Plastic Deformation for Grain Refinement and Superplasticity Mater. Sci. Forum 357-359 (2001) 489-498

  284. P.Sh. Lantsman et al.: Effect of Alloying with Rare Earth Metals on the Recrystallization Temperature and Properties of Aluminum and an Alloy of the System Al-Cu-Mn, Met. Sci. & Heat Tr. (4) (1990) 285-288

  285. S. Lee, A. Utsunomiya, H. Akamatsu, K. Neishi, M. Furukawa, Z. Horita and T.G. Langdon: Influence of Scandium and Zirconium on Grain Stability and Superplastic Ductilities in Ultrafine-Grained Al-Mg Alloys, Acta Mater. 50 (2002) 553-564

  286. B. Lenczowski et al.: Neue Aluminiumlegierungen für die Luftfahrt, Aluminium 73 (1997) 200-20

  287. B. Lenczowski, R. Rauh, D. Wieser, G. Tempus, G. Fischer, J. Becker, K, Folkers, R. Braun and G. Lütjering: Weldable AlMgSc Alloys for Transportation Technology, Aluminium 76 (2000) 350-356

  288. B. Lenczowski, T. Hack, D. Wieser, G. Tempus, G. Fischer, J. Becker, K. Folkers, R. Braun and G. Lütjering: AlMgSc Alloys for Transportation Technology, Mater. Sci. Forum 331-337 (2000) 957-963

  289. B. Lenczowski, V. Yelagin, R. Rauh, V. Zakharov and Y. Filatov: Novel Weldable Anti-Corrosive Aluminium-Magnesium Alloy Containing a High Amount of Magnesium, Especially for Use in Automobiles, World Patent WO 0011231, March 11 2000
    Available Online

  290. B. Lenczowski, R. Rauh, D. Wieser and G. Tempus: Weldable, Corrosion-Resistant AlMg Alloys, Especially for Manufacturing Means of Transportation, US Patent 6 258 318, July 10 2001
    Available Online

  291. B. Lenczowski, V. Yelagin, R. Rauh, V. Zakharov and Y. Filatov: Weldable Anti-Corrosive Aluminum-Magnesium Alloy Containing a High Amount of Magnesium, Especially for Use in Automobiles, US Patent 6 315 948, Nov. 13 2001
    Available Online

  292. B. Lenczowski: Neue Leichtmetalle im Flugzeugbau, Proc. Materials Week 2001 October 1-4 2001, Munich, Germany
    Abstract

  293. B. Lenczowski, V. Yelagin, R. Rauh, V. Zakharov and Y. Filatov: Weldable Anti-Corrosive Aluminium-Magnesium Alloy Containing a High Amount of Magnesium, Especially for Use in Aviation, World Patent WO 0011232, March 2 2002
    Available Online

  294. H.A. Lipsitt and A.M. Sherman: Light-Weight Aluminum Alloy Design Methodology, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 385-389

  295. H.A. Lipsitt and A.M. Sherman: Lightweight Aluminum Alloy Design Methodology, Adv. Mater. & Proc. (10) (2001) 37-39
    Abstract

  296. V.V. Litovskii et al.: The Enthalpies of Formation of Liquid Aluminium-Scandium Alloys, Russ. J. Phys. Chem. 60 (9) (1986) 1385-1386

  297. J. Liu, D.J. Chakrabarti: Grain Structure and Microtexture Evolution During Superplastic Forming of a High Strength Al-Zn-Mg-Cu Alloy, Acta Mater. 44 (1996) 4647-4661

  298. J. Liu and F.H. (Sam) Froes: Aluminum Alloys for Aerospace Applications: A Review, Proc. Synthesis of Lightweight Metals III, eds. F.H. Froes, C.M. Ward-Close, P.G. McCormick and D. Eliezer, TMS (1999) 103-111

  299. J. Liu and M. Kulak: A New Paradigm in the Design of Aluminum Alloys for Aerospace Applications, Mater. Sci. Forum 331-337 (2000) 127-140

  300. V.I. Lukin: Effect of Alloying Elements Sc, Mn and Zr on Weldability of Alloys of the Al-Mg-Sc-Mn-Zr System, Weld. Inter. 10 (1996) 987-989

  301. V.I. Lukin et al.: Examination of the Weldability of Superlight Al-Mg-Li alloys, Weld. Inter. 11 (1997) 488-492

  302. N.A. Makhmudova et al.: Effect of Alloying with Scandium on the Weldability of Al-6%Mg Alloy, Paton Weld. J. 3 (1991) 688-690

  303. T.I. Malinkina, N.A. Markachev, V.A. Kovtun and N.M. Bukhanova: Welded Structures of 01570 Aluminium Alloy, Weld. Inter. 12 (1998) 566-569

  304. M.V. Markushev and M.Yu. Murashkin: Strength of Submicrocrystalline Severly Deformed Commercial Aluminum Alloys, Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 371-380
    Abstract

  305. E.A. Marquis and D.N. Seidman: Nanoscale Structural Evolution of Al3Sc Precipitates in Al(Sc) Alloys, Acta Mater. 49 (2001) 1909-1919
    Online Article

  306. E.A. Marquis, D.N. Seidman and D.C. Dunand: Creep of Precipitation-Strengthened Al(Sc) Alloys, Creep Deformation: Fundamentals and Applications, eds. R.S. Mishra, J.C. Earthman and S.V. Raj, 2002 TMS Annual Meeting, Seattle, Washington, Feb. 17-21 2002, 299-308
    Abstract

  307. L.F. Martynova et al.: Knight Shift in Certain Scandium Compounds, Phys. Met. Metall. 37 (1974) 169-170

  308. L. Meng, X.L. Zheng: Overview of the Effects of Impurities and Rare Earth Elements in Al-Li Alloys, Mater. Sci. Eng. A237 (1997) 109-118

  309. W.S. Miller, P.C.M. de Haan, A. Haszler, A. Heinz, C. Keidel and H. Ghaziary: High Performance Material for Aerospace Applications, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 1985-1990

  310. Yu.V. Milman, D.V. Lotsko and O.I. Sirko: 'Sc Effect' of Improving Mechanical Properties in Aluminium Alloys, Mater. Sci. Forum 331-337 (2000) 1107-1111

  311. Yu.V. Milman, D.V. Lotsko, O.D. Neikov, A.I. Sirko, N.A. Yefimov, A.N. Bilous, D.B. Miracle and O.N. Senkov: Processing, Structure and Mechanical Behavior of Rapidly Solidified Aluminum Alloys Containing Quasicrystalline Particles, Mater. Sci. Forum 396-402 (2002) 723-728

  312. Y.V. Milman, A.I. Sirko, D.V. Lotsko, O.N. Senkov and D.B. Miracle: Microstructure and Mechanical Properties of Cast and Wrought Al-Zn-Mg-Cu Alloys Modified with Zr and Sc, Mater. Sci. Forum 396-402 (2002) 1217-1222

  313. Y. Miura et al.: Yield Strength of an Al-Sc Alloy Containing Coherent Al3Sc Precipitates, Aspects of High Temperature Deformation and Fracture in Crystalline Materials, July 28-31 1993, Nagoya, Japan, 255-262

  314. Y. Miura et al.: Precipitation Hardening in an Al-2.4Li- 0.19Sc Alloy, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. II, Atlanta, Georgia, USA 161-168

  315. Y. Miura et al.: Recrystallization of Al-3Mg and Al-3Mg-0.2Sc Alloys, Mater. Sci. Forum 217-222 (1996) 505-510

  316. Y. Miura, C.-H. Joh and T. Katsube: Determination of Vacancy-Sc Interacion Energy by Electrical Resistivity Measurements, Mater. Sci. Forum 331-337 (2000) 1031-1035

  317. Y. Miyake and T. Suganuma: Superplastic Aluminum Alloy and Process for Producing Same, US Patent 6 056 835, May 2 2000
    Available Online

  318. V.I. Moskvitin and S.V. Makhov: On the Possibility of Manufacturing Aluminum-Scandium Alloying Compounds in an Aluminum Electrolyzer, Russ. J. Non-Ferrous Met. 39 (7) (1998) 39-43

  319. M.G. Mousavi: Grain Refinement and Hot Cracking Resistance of Aluminium Weldments, Dr.Ing. Thesis, NTNU, Trondheim, Norway, 1999

  320. M.G. Mousavi, C.E. Cross and Ø. Grong: Effect of Scandium and Titanium-Boron on Grain Refinement and Hot Cracking of Aluminium Alloy 7108, Sci. Technol. Weld. Joining 4 (1999) 381-388
    Abstract

  321. T. Mukai, T.G. Nieh, H. Watanabe and K. Higashi: Microstructure and Superplastic Properties in an ECAE Al-4Mg-0.5Sc Alloy Processed at Elevated Temperatures, Mater. Sci. Forum 304-306 (1999) 109-114

  322. A.K. Mukhopadhyay, G.M. Reddy, K.S. Prasad, S.V. Kamat, A. Dutta and C. Mondal: Influence of Scandium Additions on the Microstructure and Properties of AA 7010 Alloy Sheets, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 63-71

  323. A.K. Mukhopadhyay and G.M. Reddy: Influence of Trace Addition of Ag on the Weldability of Al-Zn-Mg-Cu-Zr Base 7010 Alloy, Mater. Sci. Forum 396-402 (2002) 1665-1670

  324. J. Murken, O. Girard, R. Höhner, B. Skrotzki and G. Eggeler: On the Influence of Stress and Strain on the Coarsening of Precipitates in Al-Alloys under Creep Conditions, Mater. Sci. Forum 331-337 (2000) 1507-1512

  325. J. Murken, R. Höhner, B. Skrotzki and G. Eggeler: On the Effect of Combined Thermal and Mechanical Loading on the Microstructural Evolution of an Al-Mg-Li Alloy, Mater. Sci. Forum 396-402 (2002) 1291-1296

  326. L.E. Murr, G. Sharma, F. Contreras, M. Guerra, S.H. Kazi, M. Siddique, R.D. Flores, D.J. Shindo, K.F. Soto, E.A. Trillo, C. Schmidt and J.C. McClure: Joining Dissimilar Aluminum Alloys and Other Metals and Alloys by Friction Stir Welding, Aluminum 2001 - Proc. of the TMS 2001 Aluminium Automotive and Joining Sessions, eds. S.K. Das, J.G. Kaufman and T.J. Lienert, TMS, 2001 197-211

  327. J.L. Murray: The Al-Sc (Aluminum-Scandium) System, J. Phase Equil. 19 (1998) 380- 384

  328. M.M. Myshlyaev, V.M. Fedorov, L.V. Fedorova and H.J. McQueen: Development of Rapidly-Solidified Aluminum-Transition Metal Alloys for Long-Term Work at Elevated Temperatures, Proc. Hot Workability of Steels and Light Alloys-Composites, Aug. 24-28 1996 Montreal, Quebec, Canada 77-88

  329. M. Nakayama, Y. Miura: The Effect of Scandium on the Age-Hardening Behavior of an Al- Cu Alloy, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. I, Atlanta, Georgia, USA 538-545

  330. M. Nakayama et al.: Precipitation of Al3Sc in Al-0.23 mass%Sc Alloy, J. Japan Inst. Metals 59 (5) (1995) 487-491

  331. M. Nakayama and Y. Miura: Effect of Sc Addition on the Age-Hardening and Precipitation Behavior of Al-2.5 mass%Cu Alloy, , J. Japan Inst. Light Metals 46 (1996) 275-279

  332. M. Nakayama et al.: Precipitation of Al3Sc in Al-0.23 mass%Sc Alloy, Mater. Trans., JIM 38 (1997) 852-857
    Abstract

  333. M. Nakayama, T. Okuyama and Y. Miura: Microstructure and Mechanical Properties of Al-2.5%Cu-0.23%Sc Alloy, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 517-522

  334. M. Nakayama, T. Okuyama and Y. Miura: Interaction between q'-Al2Cu and Al3Sc in the Heterogeneous Precipitation in an Al-Cu-Sc Alloy, Mater. Sci. Forum 331-337 (2000) 927-932

  335. A.V. Nasonov et al.: Wetting of Carbon by Melts of Aluminium with Rare-Earth Metals, Inorg. Mater. 24 (1988) 1711-1714

  336. O.P. Naumkin et al.: Phase Equilibrium Diagram and Properties of Aluminium-Scandium Alloys, Russ. Metall. (4) (1965) 128-136

  337. O.D. Neikov, D.V. Lotsko, A.I. Sirko, A.V. Sameljuk, G.E. Thompson, N.P. Zakharova and N.A. Yefimov: Properties of Rapidly Solidified Powder Alloys of the Al-Zn-Mg System, Mater. Sci. Forum 396-402 (2002) 1223-1228

  338. M. Nemoto, Z. Horita, M. Furukawa and T.G. Langdon: Microstructural Evolution for Superplasticity Using Equal-Channel Angular Pressing, Mater. Sci. Forum 304-306 (1999) 59-66

  339. Z. Nie, T. Jin, J. Fu, G. Xu, J. Yang, J. Zhou and T. Zuo: Research on Rare Earth in Aluminum, Mater. Sci. Forum 396-402 (2002) 1731-1736

  340. T.G. Nieh et al.: Subgrain Formation and Evolution During the Deformation of an Al-Mg-Sc Alloy at Elevated Temperatures, Scripta Mater. 36 (1997) 1011-1016

  341. T.G. Nieh, L.M. Hsiung, J. Wadsworth and R. Kaibyshev: High Strain Rate Superplasticity in a Continuously Recrystallized Al-6%Mg-0.3%Sc Alloy, Acta Mater. 46 (1998) 2789-2800

  342. H. Nishimura et al.: A Highly Reliable Via Filling Technology Using High-Temperature Al- Sc Alloy Sputter Deposition, International Electron Devices Meeting 1993, December 5-8 1993, Washington DC, USA 281-284

  343. A.F. Norman and P.B. Prangnell: The Effect of Scandium on the Solidification Behaviour of Aluminium Alloys, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 219-224

  344. A.F. Norman, P.B. Pragnell and R.S. McEwen: The Solidification Behaviour of Dilute Aluminium-Scandium Alloys, Acta Mater. 46 (1998) 5715-5732

  345. I.I. Novikov, O.E. Grushko: Hot Cracking Susceptibility of Al-Cu-Li and Al-Cu-Li-Mn Alloys, Mater. Sci. Techn. 11 (1995) 926-932

  346. G.M. Novotny and A.J. Ardell: Precipitation of Al3Sc in binary Al-Sc alloys, Mater. Sci. Eng. A 318 (2001) 144-154

  347. V. Ocenasek and M. Slamova: Resistance to Recrystallization due to Sc and Zr Addition to Al-Mg Alloys, Mater. Charact. 47 (2001) 157-162

  348. M. Ocko, E. Babic, R. Krsmik, E. Girt and B. Leontic: Some Properties of AlSc Solid Solutions, J. Phys. F 6 (1976) 703-707
    Abstract

  349. M. Ocko et al.: Changes of the Lattice Parameter in Al 3d Alloys due to the Virtual Bound State, Solid State Comm. 18 (1976) 705-708

  350. Kh. O. Odinaev et al.: Phase Equilibrium Diagram of the Al-Mg-Sc System in 0-33.3at.% Sc at 673 K, Dokl. Akad. Nauk Tadzh. SSR 32 (1989) 37-38

  351. Kh. O. Odinaev et al.: Quasi-binary Sections and Liquidus Surface of the Al-Mg-Sc System, Russ. Metall. (4) (1991) 200-203

  352. S.-I. Ogawa, H. Nishimura: A Novel Al-Sc (Scandium) Alloy for Future LSI Interconnection, International Electron Devices Meeting 1991, December 8-11 1991, Washington DC, USA 277-280

  353. S. Ogawa, H. Nishimura and T. Yamada: Aluminum Interconnection, US Patent 5 759 868, June 2 1998
    Available Online

  354. S. Ogawa, H. Nishimura and T. Yamada: Aluminum Scandium Alloy Interconnection, US Patent 5 804 879, Sept. 8 1998
    Available Online

  355. K. Oh-ishi, Z. Horita, D.J. Smith and T.G. Langdon: Grain Boundary Structure in Al-Mg and Al-Mg-Sc Alloys after Equal-Channel Angular Pressing, J. Mater. Res. 16 (2001) 583-589
    Abstract

  356. H. Okamoto: Al-Sc (Aluminum-Scandium), J. Phase Equil. 12 (1991) 612- 613

  357. H. Okamoto: Al-Sc (Aluminum-Scandium), J. Phase Equil. 21 (2000) 310

  358. V.V. Ovchinnikov, A.M. Drits and T.V. Krymova: Experience in Applications of Aluminum-Lithium Alloy 1460, Russ. J. Non-Ferrous Met. 38 (12) (1997) 31-37

  359. V.V. Ovchinnikov, A.M. Drits and T.V. Krymova: Technological Special Features of Production of Welded Aircraft Structures made of 1460 Aluminium-Lithium Alloy, Weld. Inter. 12 (1998) 489-492

  360. V. Ozolins and M. Asta: Large Vibrational Effects upon Calculated Phase Boundaries in Al-Sc, Phys. Rev. Letters 86 (2001) 448-451
    Abstract

  361. A.B. Pandey, K.L. Kendig and D.B. Miracle: Development of a New Discontinuously Reinforced Aluminum for Space Applications, Affordable MMCs for High Performance Applications, eds. A. Pandey, K. Kendig, and T. Watson, 2001 TMS Fall Meeting, Indianapolis, Nov. 4-8 2001, 35-46
    Abstract

  362. C. Papastaikoudis, D. Papadimitropoulos: Influence of the Virtual Bound State on the Low- Field Hall Coefficient. II. Dilute Alloys of Sc, Ti, V, Co and Ni in Al, Phys. Rev. B 24 (1981) 3108-3114
    Abstract

  363. H.G. Paris, T.H. Sanders, Jr., and Y.W. Riddle: Assessment of Scandium Additions in Aluminum Alloy Design, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 499-504

  364. B.A. Parker, Z.F. Zhou: The Mechanical Properties of Aluminium Magnesium Scandium Alloys, Proceedings of the 3rd International Conference on Aluminium Alloys, June 22-26 1992, Vol.I, NTH, Trondheim, Norway 363-367

  365. B.A. Parker et al.: The Effect of Small Additions of Scandium on the Properties of Aluminium Alloys, J. Mater. Sci. 30 (1995) 452-458

  366. B.A. Parker: On the Contribution of Coherency Strains to the Strength of Alloys, Mater. Sci. Forum 189/190 (1995) 347-351

  367. B.E. Paton, A.Ya. Ishchenko, K.A. Yushchenko, A.G. Bratukhin, A.G. Vovnyanko, E.T. Vasilevskii and A.G. Molyar: Prospects for Using Welding in Construction of New Generation Aircraft, Paton Weld. J. 8 (1996) 343-344
    Abstract

  368. B.E. Paton: Problems and Advances in Welding at the Tranistion of the Centuries, Paton Weld. J. (7) (1999) 2-11

  369. V.A. Perfilev et al.: Rapid Titrimetric Determination of Scandium in Aluminium Alloys, Ind. Lab. 62 (1996) 151

  370. T. Pfannenmüller, E. Loechelt, P.-J. Winkler, S.M. Mozharovskij, D.S. Galkin, E.G. Tolchennikova, V.M. Chertovikov, V.G. Davydov, E.N. Kablov, L.B. Khokhlatova, N.I. Kolobnev and I.N. Fridlyander: Aluminium Based Alloy and Method for Subjecting it to Heat Treatment, World Patent WO 9915708, Apr. 1 1999
    Available Online
    Addendum to World Patent WO 9915708, Apr. 14 1999
    Available Online

  371. A. Pisch, J. Gröbner and R. Schmid-Fetzer: Application of Computational Thermochemistry to Al and Mg Alloy Processing with Sc Additions, Mater. Sci. Eng. A 289 (2000) 123-129

  372. A. Pisch, F. Hodaj, P. Chaudouët and C. Colinet: Standard Enthalpies of Formation of some Mn-Y and Mn-Sc Intermetallic Compounds, J. Alloys & Compounds 319 (2001) 210-213

  373. Yu. M. Platov, M.N. Pletnev: Phase Instability of Alloys Caused by Transmutation Effects During Neutron Irraditation, J. Nucl. Mater. 211 (1994) 95-100

  374. Yu.A. Pokhil et al.: Mechanical Properties of Scandium-Alloyed Aluminium Alloys and their Welded Joints at Cryogenic Temperatures, Advances in Cryogenic Engineering (Materials) 42 (1996) 271-276

  375. I.J. Polmear: Control of Precipitation Processes and Properties in Aged Aluminium Alloys by Trace Element Additions, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 75-86

  376. D.P. Pope: Deformation and Fracture of Intermetallic Compounds Having the L12 Crystal Structure, Ordered Intermetallics - Physical Metallurgy and Mechanical Behavior, eds. C.T. Liu, R.W. Cahn and G. Sauthoff, 23-28 June 1991, Irsee, Germany 143-153

  377. P.S. Popel et al.: Influence of Scandium on the Properties of Liquid Aluminium, Russ. Metall. (3) (1983) 38-43

  378. I.N. Pyagai, A.V. Vakhobov: Enthalpy of Formation of Aluminides in the Al-Sc System, Russ. Metall. (5) (1990) 50-52

  379. A.H. Ratner, M.B. Geilikman, S.V. Aleksandrovski, F. Jiang, H. Li and Z. Yin: Thermodynamic Calculation on Metallic Thermoreduction during Preparation of Aluminum-Rare Master Alloys, Trans. Nonferrous Met. Soc. China 11 (2001) (1) 18-21
    Abstract

  380. G.M. Raynaud: Procédé Permettant de Diminuer le Taux de Recristallisation de l'aluminium et de ses Alliages, FR Patent 2 637 914, Oct. 17. 1988

  381. V.N. Rechkin et al.: Crystal Structures of some Scandium Aluminides, Sov. Phys. Crystall. 9 (1964) 325-327

  382. K.-H. Rendigs: Aluminium Structures Used in Aerospace - Status and Prospects, Mater. Sci. Forum 242 (1997) 11-23

  383. E.A. Repnikova et al.: Influence of Electron Irradiation on Decomposition of Alloy Al-Mg-Sc, Phys. Met. Metall. 57 (3) (1984) 103-106

  384. Y.W. Riddle, H.G. Paris and T.H. Sanders, Jr.: Control of Recrystallization in Al-Mg-Sc-Zr Alloys, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 1179-1184

  385. Y.W. Riddle and T.H. Sanders, Jr.: Recrystallization Performance of AA7050 Varied with Sc and Zr, Mater. Sci. Forum 331-337 (2000) 799-803

  386. Y.W. Riddle and T.H. Sanders, Jr.: Contribution of Al3Sc to Recrystallization Resistance in Wrought Al-Sc Alloys, Mater. Sci. Forum 331-337 (2000) 939-944

  387. Y.W. Riddle, M. McIntosh and T.H. Sanders, Jr.: Improving Recrystallization Resistance in Wrought Aluminum Alloys with Scandium Addition, Lightweight Alloys for Aerospace Application VI, eds. K. Jata, E.W. Lee, W. Frazier and N.J. Kim, TMS, 2001 25-39
    Abstract

  388. Y.W. Riddle, H. Hallem and N. Ryum: Highly Recrystallization Resistant Al-Mn-Mg Alloys Using Sc and Zr, Mater. Sci. Forum 396-402 (2002) 563-568

  389. O. Roder et al.: Correlation Between Microstructure and Mechanical Properties of Al-Mg Alloys Without and With Scandium, Mater. Sci. Forum 217-222 (1996) 1835- 1840

  390. O. Roder et al.: Fatigue Properties of Al-Mg Alloys With and Without Scandium, Mater. Sci. Eng. A234-236 (1997) 181-184

  391. C.L. Rohrer, M.D. Asta, S.M. Foiles and R.W. Hyland, Jr.: A Kinetic Model of Precipitate Evolution, Mat. Res. Soc. Symp. Proc. 398 (1996) 477-482

  392. L.L. Rokhlin et al.: Formation of Grain Boundaries of a Single Phase Liquid Solution in the Al-Mg-Sc-Zr System, Russ. Metall. (6) (1991) 146-148

  393. L.L. Rokhlin et al.: Structure of the Phase Equilibrium Diagrams of Aluminum Alloys with Scandium, Powder Met. & Met. Cer. 36 (1997)

  394. T.D. Rostova and V.V. Zakharov: Shear Bands in Aluminum Lithium Alloys, Met. Sci. & Heat Tr. (6) (1997) 236-239

  395. T.D. Rostova and V.V. Zakharov: Anisotropy of Mechanical Properties of Al-Li Alloy Sheets, Russ. J. Non-Ferrous Met. 38 (8) (1997) 59-64

  396. T.D. Rostova, V.G. Davydov, V.I. Yelagin and V.V. Zakharov: Effect of Scandium on Recrystallization of Aluminum and its Alloys, Mater. Sci. Forum 331-337 (2000) 793-798

  397. V.I. Ryazantsev, V.A. Fedoseev: Arc Welding Structures of 1420 Aluminium Alloy, Weld. Inter. 9 (1995) 311-315

  398. V.I. Ryazantsev, V.A. Fedoseev: Mechanical Properties of Welded Joints in Aluminium Alloys of the Al-Cu System, Weld. Inter. 9 (1995) 566-569

  399. V.I. Ryazantsev, V.A. Fedoseev: Technology of Arc-Welding Aluminium Alloys Containing Lithium, Weld. Inter. 10 (1996) 983-986

  400. V.I. Ryazantsev, V.A. Fedoseev: Effect of the Arc Welding Conditions and the Composition of Filler Wire on the Mechanical Properties of Welded Joints in Aluminium Alloys, Weld. Inter. 11 (1997) 995-998

  401. J. Røyset, N. Ryum: Precipitation and Recrystallization of an Al-Mg-Sc Alloy, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. I, Atlanta, Georgia, USA 194-201

  402. J. Røyset and N. Ryum: Precipitation Kinetics and Mechanisms in a Binary Al-Sc Alloy, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 793-798

  403. J. Røyset, H. Hovland and N. Ryum: An Investigation of Dilute Al-Sc-Si Alloys, Mater. Sci. Forum 396-402 (2002) 619-624

  404. A. Saccone, G. Cacciamani, D. Macciò, G. Borzone and R. Ferro: Contribution to the Study of the Alloys and Intermetallic Compounds of Aluminium with the Rare-Earth Metals, Intermetallics 6 (1998) 201-215

  405. G.A. Salishchev et al.: Superplasticity of Aluminium Alloys with Ultrafine Grained Structure, Proceedings of the Second International Conference on Aluminium Alloys, October 9-13 1990, Beijing, China 413-415

  406. N. Sano et al.: Precipitation Process of Al-Sc Alloys, Journal de Physique 48 C6 (1987) 337-342

  407. N. Sano, H.-H. Jo, , K.-I. Hirano and T. Sakurai: Precipitation Study of an Al-0.25 mass%Sc Alloy, , J. Japan Inst. Metals 39 (1989) 444-450

  408. N. Sano et al.: Precipitation Study of an Al-0.25 wt.% Sc Alloy, Proceedings of the Second International Conference on Aluminium Alloys, October 9-13 1990, Beijing, China 549-554

  409. E.M. Savitsky, V.F. Terehova, I.V. Burov and O.P. Naumkin: Study of Rare Earth Crystals and Alloys, Proc. Fourth Conference on Rare Earth Research, ed. L. Eyring, April 22-25 1964, Phoenix, Arizona, USA 409-420

  410. R.R. Sawtell et al.: Superplastic Aluminum Alloys Containing Scandium, US Patent 4 689 090, Aug. 25 1987

  411. R.R. Sawtell and J.W. Morris, Jr.: Exploratary Alloy Development in the System Al-Sc-X, Dispersion Strengthened Aluminium Alloys, January 25-29 1988, Phoenix, Arizona, USA 409-420

  412. R.R. Sawtell et al.: Superplastic Aluminum Products and Alloys, US Patent 4 874 440, Oct. 17, 1989

  413. R.R. Sawtell and C.L. Jensen: Mechanical Properties and Microstructures of Al-Mg-Sc Alloys, Metall. Trans. A 21A (1990) 421-430

  414. U. Schmidt, A.L. Beresina, K.V. Chuistov, T.A. Monastyrskaja and A.D. Rud: Decomposition of Rapidly Quenched Supersaturated Al - Sc - X (X: Li, Ta, Ti) Alloys, Proc. NATO-conference on Advanced Light Alloys and Composites,1997, Advanced Study Institute, Zakopane, Poland

  415. U. Schmidt, A.L. Beresina and A.D. Rud: The Decomposition Process in Rapidly Quenched AlLiSc - Alloys, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 787-792

  416. U. Schmidt and B. Schmidt: Modelling of the Transition Kinetics in Al-Alloys, Mater. Sci. Forum 331-337 (2000) 889-900

  417. J.H. Schneibel and E.P. George: Microstructure, Compression and Fracture Behavior of Al3Sc, Scripta Metall. Mater. 24 (1990) 1069-1074

  418. J.H. Schneibel and P.M. Hazzledine: The Crystallography of Cleavage Fracture in Al3Sc, Mat. Res. Soc. Symp. Proc. 213 (1991) 323-328

  419. J.H. Schneibel and P.M. Hazzledine: The Crystallography of Cleavage Fracture in Al3Sc, J. Mater. Res. 7 (1992) 868-875
    Abstract

  420. A. Schulz, K. Schimanski and P. Mayr: Spray Forming of Scandium Containing Al-Cu-Alloys, Proc. Int. Conf. On Spray Deposition and Melt Atomisation (SDMA 2000), Bremen, Germany, June 26 - 28 2000 vol. 1, 243-256

  421. G.O. Schumann and R.C. Calcraft: Weldability of High Strength Aluminium-Scandium Alloys, Australasian Weld. J. 46 (2001) 46-47

  422. J.C. Schuster and J. Bauer: The Ternary Systems Sc-Al-N and Y-Al-N, J. Less-Common Met. 109 (1985) 345-350

  423. G.D. Scott, B.S. Shabel and A. Morales: Aluminum Alloy Suitable for Pistons, US Patent 5 162 065, Nov. 10 1992
    Available Online

  424. E.I. Selnikhina, L.I. Kaigorodova and A.A. Tkachenko: The Formation of the Grain Boundary Structure, Aging Behavior and Mechanical Properties of Al-Zn-Mg-Cu Alloy, Mater. Sci. Forum 294-296 (1999) 707-710

  425. O.G. Senatorova, A.N. Uksusnikov, J.N. Fridlyander, J. Koshorst, R.R. Romanova, N.A. Ryazanova, A. Galliot and V.V. Cherkassov: TEM Study of Precipitation in High-Strength 1987 Alloy Sheets after Superplastic Forming, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 589-593

  426. O.G. Senatorova, A.N. Uksusnikov, S.F. Lehoshina, I.N. Fridlyander and I.P. Zhegina: Influence of Different Minor Additions on Structure and Properties of High-Strength Al-Zn-Mg-Cu Alloy Sheets, Mater. Sci. Forum 331-337 (2000) 1249-1253

  427. O.N. Senkov, D.B. Miracle, Y.V. Milman, J.M. Scott, D.V. Lotsko and A. Sirko: Low Temperature Mechanical Properties of Scandium-Modified Al-Zn-Mg-Cu Alloys, Mater. Sci. Forum 396-402 (2002) 1127-1132

  428. K.N. Sergeev, T.V. Krymova, A.M. Dritz and S.G. Bulgakova: High-Strength Weldable Aluminum-Lithium Alloy 1460 in Multipurpose Aerospace Systems, Russ. J. Non-Ferrous Met. 39 (12) (1998) 25-28

  429. O.A. Setyukov and J.N. Fridlyander: Stress Relaxation in Al Alloys of Al-Mg-Mn, Al-Mg-Sc and Al-Mg-Li-Systems, Mater. Sci. Forum 331-337 (2000) 1381-1385

  430. R.E. Shalin et al.: Design and Fabrication of Large Structures of Aluminium-Lithium Alloys for Aerospace Technology, Weld. Inter. 11 (1997) 387-392

  431. A.M. Shammazov, N.K. Tsenev, R.Z. Valiev, M.M. Myshlyaev, M.M. Bikbulatov and S.P. Lebedich: High-Strain-Rate Superplasticity of Commercial Grade 1421 and 1460 Aluminum Alloys, Phys. Met. Metall. 89 (3) (2000) 314-318
    Abstract

  432. V.G. Shevchenko et al.: Effect of Sc, La and Sm on the Oxidation of Aluminum, Inorg. Mater. 22 (1986) 205-208

  433. G.L. Shneider et al.: Stability of Supersaturated Solid Solution of Al-Mg-Li Alloy with Sc Addition, Tsvetnye Metally 34 (3) (1993) 44-46

  434. G.L. Shneider, A.M. Drits: Hardenability of Aluminum-Lithium Alloys, Met. Sci. & Heat Tr. (9) (1995) 373-377

  435. G.L. Shneider: Phase Transformations in Heat Treatment of Al-Li Alloys and Optimization of Operational Properties of Semifinished Products from these Alloys, Met. Sci. & Heat Tr. 40 (1) (1998) 27-33

  436. G.L. Shneider, L.M. Sheveleva and V.V. Kafelnikov: Delayed Fracture of Aluminum Alloys, Met. Sci. & Heat Tr. 41 (3) (1999) 109-116

  437. A.B. Shubin, L.F. Yamshchikov, S.P. Yatsenko, S.S. Zobnin and O.B. Yakovlev: Thermodynamic Properties of Intermetallides in the Sc-Al System, Russ. Metall. (6) (1999) 145-147

  438. E.I. Shvechkov, T.D. Rostova and V.V. Zakharov: Study of Anisotropy of Mechanical Properties of Alloy 1424 Sheets, Russ. J. Non-Ferrous Met. 41 (4) (2000) 95-102

  439. E.I. Shvechkov, T.D. Rostova, V.V. Zakharov and A.V. Demidenkov: Cyclic Endurance of Sheets from Alloy 1424 with Different Thicknesses, Met. Sci. & Heat Tr. 43 (4) (2001) 148-151

  440. V.I. Silaeva, B.A. Prusakov and G.I. Eskin: Effect of Microalloying on the Structure and Properties of Alloys in the Al-Si-Cu System, Met. Sci. & Heat Tr. 42 (6) (2000) 241-245

  441. O. Simmich et al.: The Effect of Scandium on the Structure of Precipitates in AlLiCu Alloys, Mater. Sci. Forum 217-222 (1996) 845-850

  442. V. Singh and A.A. Gokhale: Control of Grain Structure through Transition Elemental Additions in an Al-Li Base Alloy, Mater. Sci. Forum 331-337 (2000) 477-482

  443. V. Singh, K.S. Prasad and A.A. Gokhale: Solidification Structure of Aluminium with Trace Additions of Sc and Zr, Int. J. Cast Metals Res. 14 (2002) 287-291

  444. V.S. Sinyavskii, V.D. Val'kov and E.V. Titkova: The Effect of Scandium and Zirconium Additions on Corrosion Properties of Al-Mg Alloys, Protection of Metals 34 (1998) 549-555
    Abstract

  445. B. Skrotzki, J. Murken and B. Heinz: Comparison of Laser-Beam Welding and Friction Stir Welding of Age-Hardenable Aluminum Alloys, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 343-350

  446. A.F. Smith: Use of Aluminium-Lithium Alloys in Helicopters, Proceedings of Alumitech '97, May 19-23 1997, Atlanta, Georgia, USA 36-50

  447. E.M. Sokolovskaya et al.: Reaction of Aluminum with Chromium and Scandium, Met. Sci. & Heat Tr. (11) (1989) 837-839

  448. E.M. Sokolovskaya et al.: Investigation of Rapidly Quenched Aluminum Alloys Hardened with Transition Metals, Russ. J. Non-Ferrous Met. 37 (7) (1996) 76-79

  449. E.M. Sokolovskaya et al.: Time-Temperature Section of the Phase Diagram of the Al-Sc-Zr System at 500C, Met. Sci. & Heat Tr. (5) (1997) 211-213

  450. E.M. Sokolovskaya, E.F. Kazakova, V.A. Alikhanov and E.V. Zhuravleva: Interaction between Al3Sc and Al6Mn Intermetallic Compounds at 770 K, Moscow Univ. Chem. Bull. 52 (5) (1997) 70-72

  451. E.M. Sokolovskaya, E.F. Kazakova and O.D.-S. Kendivan: Polythermal Cross Sections of the Systems Al-V-Me (Me = Zr, Sc) for the Al21V2-MeAl3 Sections, Russ. Metall. (4) (1998) 135-137

  452. Y. Songbo, H. Boyun and Y. Zhimin: Effect of Minor Sc on High Temperature Mechanical Properties of Ti-Al Based Alloys, Mater. Sci. Eng. A 280 (2000) 204-207

  453. C.J. Sparks et al.: Bonding Energies and Long-Range Order in the Trialuminides, Mat. Res. Soc. Symp. Proc. 213 (1991) 363-368

  454. P.K. Spitsyn, O.N. L'vov: Simultaneous Spectrophotometric Determination of Titanium and Scandium in Aluminum Alloys, Ind. Lab. 51 (1985) 295-296

  455. J.T. Staley et al.: Aluminum Alloys for Aerostructures, Adv. Mater. & Proc. (10) (1997) 17-20
    Abstract

  456. E.A. Starke, Jr., J.T. Staley: Application of Modern Aluminum Alloys to Aircraft, Prog. Aerospace Sci. 32 (1996) 131-172

  457. A. Sverdlin, A.M. Drits, T.V. Krimova, K.N. Sergeev and I.B. Ginko: Aluminum-Lithium Alloys for Aerospace, Adv. Mater. & Proc. (6) (1998) 49-51
    Abstract

  458. A. Sverdlin, A. Drits and V. Ovchinnikov: Weldability of Aluminum-Copper-Lithium Alloys, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 255-260

  459. W.T. Tack: Aluminum-Scandium Alloys, US Patent 5 597 529, Jan. 28 1997
    Available Online

  460. W.T. Tack and I.L.H. Hansson: Aluminum Alloys Containing Scandium with Zirconium Additions, US Patent 5 620 652, Apr. 15 1997
    Available Online

  461. S. Takayama: Effects of Sc or Tb Addition on the Microstructures and Resistivities of Al Thin Films, Mat. Res. Soc. Symp. Proc. 500 (1998) 107-112

  462. C. Tan et al.: The Ageing Behavior and Tensile Properties of Al-Sc Alloy, Proceedings of the 3rd International Conference on Aluminium Alloys, June 22-26 1992, Vol.I, NTH, Trondheim, Norway 290-294

  463. C.Y. Tan et al.: The Ageing Behaviour and Tensile Properties of Al-Li Alloy Containing Sc, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. II, Atlanta, Georgia, USA 329-333

  464. C.-Y. Tan, Z.-Q. Zheng, C.-Q. Xia and Y. Liang: The Ageing Feature of Al-Li-Cu-Mg-Zr Alloy Containing Sc, J. Cent. South Univ. Technol. 7 (2) (2000) 65-67

  465. G.P. Tarcy, P.A. Foster, Jr.: Method for making a Light Metal-Rare Earth Metal Alloy, US Patent 5 037 608, Aug. 6 1991

  466. G.P. Tarcy et al.: Method for Making a Light Metal-Rare Earth Metal Alloy, US Patent 5 238 646, Aug. 24 1993

  467. G.P. Tarcy and M.L. Slaugenhaupt: Method of Making a Light Metal-Rare Earth Alloy, US Patent 6 045 631, Apr. 4 2000
    Available Online

  468. J. Tarnacki and Y.-W. Kim: Investigation of As-cast and Rapidly Solified Al3Sc, Scripta Metall. Mater. 23 (1989) 1063-1068

  469. M.Yu. Teslyuk and V.S. Protasov: The Crystal Structure of Ternary Phases in the Sc-Cu-Al System, Sov. Phys. Crystall. 10 (1966) 470-471

  470. Y. Tian, B. Sun and Y. Zhai: Preparation of Al-Sc Alloy in Chloride System with Molten Salt Electrolysis, Trans. Nonferrous Met. Soc. China 8 (4) (1998) 626-631
    Abstract

  471. Y. Tian, B. Sun and Y. Zhai: Measurement on Physiochemical Properties of NaCl-KCl-ScCl3 System for Manufacture of Al-Sc Alloy by Molten Salt Electrolysis, J. Mater. Sci. Technol. (China) 15 (2) (1999) 155-158

  472. T. Torma, E. Kovács-Csetényi, I. Vitányi, M. Butova and J. Stepanov: Effect of Scandium in High Purity Aluminium, Proc. 6th International Symposium on High Purity Materials in Science and Technology, May 6-10 1985, Akademie der Wissenschaften der DDR, Dresden, GDR, 388-389

  473. T. Torma et al.: The Effect of Scandium Addition on the Mechanical Properties of Pure Aluminium and of an AlMg6 Alloy, Mater. Sci. Forum 13/14 (1987) 497-503

  474. T. Torma et al.: Hardening Mechanisms in Al-Sc Alloys, J. Mater. Sci. 24 (1989) 3924-3927

  475. L.S. Torodskaya et al.: Polythermal Sections of the Al-Sc-Zr System, Russ. Metall. (5) (1992) 128-131

  476. L.S. Toropova et al.: Determination of Elastic Strain of the Matrix due to Particles of Phase ScAl3 in an Al-Mg-Sc Alloy, Phys. Met. Metall. 54 (1) (1982) 189-191

  477. L.S. Toropova et al.: Investigation of Alloys of the Al-Sc-Zr System in the Aluminium-rich Range, Phys. Met. Metall. 70 (6) (1990) 106-110

  478. L.S. Toropova et al.: Projection of Solidus Surfaces in the Al-rich Region of the Al-Cu-Sc System, Russ. Metall. (3) (1992) 194-199

  479. E.D. Trubnyakova et al.: Phase Equilibria in the Aluminum-Rich Corners of the Ternary Systems Al-Sr-Sc(La, Ce, Pr), Russ. Metall. (3) (1987) 219-222

  480. N.K. Tsenev et al.: Mechanical Properties of Submicron Grained Al-Li Alloys, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 1125-1132

  481. N.K. Tsenev et al.: Advanced Properties of Ultra Fine-Grained Al-Alloys, Mater. Sci. Forum 242 (1997) 127-134

  482. N.I. Turkina, V.I. Kuzmina: Phase Reactions in Al-Mg-Sc Alloys (up to 26% Mg and 3% Sc), Russ. Metall. (4) (1976) 179-183

  483. A.T. Tyvanchuk et al.: Isothermal Section of the Sc-Al-Si System at 770K, Russ. Metall. (4) (1988) 190-192

  484. R. Ünal and K.U. Kainer: Production of High Strength Al-Mg-Sc Alloys by PM, Proc. 1997 European Conference on Advances in Structural PM Component Production (EURO PM 97), Oct. 15-17 1997, Munich, Germany 482-487

  485. R. Ünal and K.U. Kainer: Production of High Strength Al-Mg-Sc Alloys by PM, Powd. Met. 41 (2) (1998) 119-122

  486. R. Ünal and K.U. Kainer: PM Production of High Strength Aluminium-Magnesium-Scandium Alloys, Met. Powd. Report 54 (2) (1999) 35 (Abstract only)

  487. R.Z. Valiev, A.V. Korznikov and R.R. Mulyukov: Structure and Properties of Ultrafine-Grained Materials Produced by Severe Plastic Deformation, Mater. Sci. Eng. A 168 (1993) 141-148

  488. V.V. Valuev: Microstructure of Large Ingots of Aluminum Alloy 01570, Met. Sci. & Heat Tr. 40 (6) (1998) 234-237

  489. V.A. Vertogradskii and I.N. Belskaya: Dependence of the Thermal Conductivity of Alloys of the Al-Mg System on the Composition and Temperature, Met. Sci. & Heat Tr. 40 (6) (1998) 231-233

  490. S.L. Verzasconi, J.W. Morris, Jr.: Cryogenic Mechanical Properties of Low Density Superplastic Al-Mg-Sc Alloys, Advances in Cryogenic Engineering (Materials) 36 (1990) 1127-1133

  491. J.S. Vetrano, S.M. Bruemmer, L.M. Pawlowski and I.M. Robertson: Influence of the Particle Size on Recrystallization and Grain Growth in Al-Mg-X Alloys, Mater. Sci. Eng. A 238 (1997) 101-107

  492. J.S. Vetrano, C.H. Henager, Jr., M.T. Smith and S.M. Bruemmer: Microstructural Development for Superplasticity in Al-Mg-Mn Alloys, Hot Deformation of Aluminum Alloys II, eds. T.R. Bieler, L.A. Lalli and S.R. MacEwen, TMS, USA 1998 407-418

  493. J.S. Vetrano, C.H. Henager, Jr., S.M. Bruemmer, Y. Ge and C.H. Hamilton: Use of Sc, Zr and Mn for Grain Size Control in Al-Mg Alloys, Superplasticity and Superplastic Forming 1998, eds. A.K. Gosh and T.R. Bieler, TMS, USA 1998 89-97

  494. N.V. Vyazovikina: The Effect of Scandium on the Corrosion Resistance of Aluminum and its Alloys in 3% NaCl Solution, Protection of Metals 35 (1999) 448-453
    Abstract

  495. D.J. Waldron and W.F. Bozich: Heat Treated Al-Cu-Li-Sc Alloys, US Patent 6 074 498, June 13 2000
    Available Online

  496. J.-S. Wang: Dislocation Nucleation and the Intrinsic Fracture Behavior of L12 Intermetallic Alloys, Acta Mater. 46 (1998) 2663-2674

  497. Z.F. Wang, P. Wang, C.L. Briant and K.S. Kumar: The Effect of Microstructure on the Polarization and Stress Corrosion Cracking in Al-5Mg Alloys Proc. Corrosion2000, Orlando, Florida, USA 00373/1-12

  498. Z. Wang, P. Wang, K.S. Kumar and C.L. Briant: Stress Corrosion Cracking of Aluminum-Magnesium Alloys Containing Scandium and Silver Additions, Proc. Chemistry and Electrochemistry of Corrosion and Stress Corrosion Cracking, ed. R.H. Jones, TMS, 2001 573-582

  499. A. Washikita, K. Kitagawa, V.I. Kopylov and A. Vinogradov: Tensile and Fatigue Properties of Al-Mg-Sc-Zr Alloy Fine-Grained by Equal-Channel Angular Pressing, Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 341-350
    Abstract

  500. T.J. Watson: High Strength Aluminum Alloy, US Patent 6 248 453, June 19 2001
    Available Online

  501. T.J. Watson: High Strength Aluminium Alloy, European Patent EP 1 111 078 A2, June 27 2001

  502. L.A. Willey: Aluminum Scandium Alloy, US Patent 3 619 181, Nov. 9 1971

  503. R. Winkler and J. Wüst: Strukturbauteil aus einer Aluminium-Druckgusslegierung, European Patent EP 0918095 A1, May 26 1999
    Available Online

  504. T. Wirtz, G. Lütjering, A. Gysler, B. Lenczowski and R. Rauh: Fatigue Properties of the Aluminium Alloys 6013 and Al-Mg-Sc, Mater. Sci. Forum 331-337 (2000) 1489-1494

  505. J.J. Witters et al.: Evaluation of Al-Li Alloys 1420 and 1421, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 351-356

  506. R. Wolter et al.: The Description of the Isothermal Decomposition Processes in Al-Sc Alloys by means of Electric Resistivity Measurements and TEM Investigations, Crystal Res. & Technol. 28 (1993) 63-72

  507. K.-D. Woo, H.-J. Mun and S.W. Kim: The Effect of Sc on the Precipitation Behavior in Al-Zn-Mg-Cu Alloys, Proc. Fourth Pacific Rim International Conference on Advanced Materials and Processing (PRICM 4), 2547-2550

  508. C. Woodward, M. Asta, G. Kresse and J. Hafner: Density of Constitutional and Thermal Point Defects in L12 Al3Sc, Phys. Rev. B 63 (2001) 094103-1-6
    Abstract

  509. Y.L. Wu, F.H. Froes, C.G. Li and J. Liu: Effects of Microalloying with Sc, Ni and Ce on the Behavior of Ingot Aluminum Alloy C912 (Al-Zn-Mg-Cu), Synthesis/Processing of Lightweigth Metallic Materials II, Feb. 9-13 1997 Orlando, FL, USA 73-81

  510. Y.-L. Wu, F.H. Froes, C. Li and A. Alvarez: Microalloying of Sc, Ni and Ce in an Advanced Al-Zn-Mg-Cu Alloy, Metall. Mater. Trans. A 30A (1999) 1017-1024
    Abstract

  511. Y. Xiao, C. Gao, H. Ma and S. Tian: Effect of Scandium on Superplasticity of Al-Mg Alloys, Trans. Nonferrous Met. Soc. China 11 (2001) (2) 235-238
    Abstract

  512. J.-H. Xu and A.J. Freeman: Phase Stability and Electronic Structure of ScAl3 and ZrAl3 and of Sc-stabilized Cubic ZrAl3 Precipitates, Phys. Rev. B 41 (1990) 12553-12561
    Abstract

  513. B.F. Yakushin, S.Yu. Nastich: A Rapid Method of Evaluating the Weldability of Aluminium Alloys, Weld. Inter. 9 (1995) 915-916

  514. D. Yamaguchi, Z. Horita, T. Fujinami, M. Nemoto and T.G. Langdon: Factors Affecting Grain Refinement in Equal-Channel Angular Pressing, Mater. Sci. Forum 331-337 (2000) 607-612

  515. A. Yamashita, D. Yamaguchi, Z. Horita and T.G. Langdon: Influence of Pressing Temperature on Microstructural Development in Equal-Channel Angular Pressing, Mater. Sci. Eng. A 287 (2000) 100-106

  516. M.R. Yavorskaya et al.: Increasing the Density and Strength of Weld Metal in the Zone of Backing Runs of Important Components of AMg6NPP Alloy, Paton Weld. J. 5 (1993) 172-175

  517. Z. Yin, Q. Pan, Y. Zhang and F. Jiang: Effect of Minor Sc and Zr on the Microstructure and Mechanical Properties of Al-Mg Based Alloys, Mater. Sci. Eng. A 280 (2000) 151-155

  518. Z. Yin, L. Yang, Q. Pan and F. Jiang: Effect of Minor Sc and Zr on Microstructures and Mechanical Properties of Al-Zn-Mg based Alloys, Trans. Nonferrous Met. Soc. China 11 (2001) (6) 822-825
    Abstract

  519. M.H. Yoo, C.L. Fu: Cleavage Fracture of Ordered Intermetallic Alloys, Mater. Sci. Eng. A153 (1992) 470-478

  520. K. Yu, S. Li, W. Li and Y. Xiao: Effect of Trace Sc and Zr on Ageing Behavior and Tensile Properties of 2618 Alloy, Trans. Nonferrous Met. Soc. China 9 (3) (1999) 593-598
    Abstract

  521. K. Yu, S. Li and W. Li: Recrystallization Behavior in an Al-Cu-Mg-Fe-Ni Alloy with Trace Scandium and Zirconium, Mater. Trans., JIM 41 (2000) 358-361
    Abstract

  522. K.A. Yushchenko et al.: Effect of Scandium on Weldability and Properties of Welded Joints in Aluminium-Magnesium-Lithium System Alloys, Welding in the World 35 (1995) 48-51

  523. V.V. Zakharov, T.D. Rostova: On the Possibility of Scandium Alloying of Copper-Containing Aluminum Alloys, Met. Sci. & Heat Tr. (2) (1995) 65-69

  524. V.V. Zakharov and T.D. Rostova: High-Resource High-Strength Aluminum Alloys, Met. Sci. & Heat Tr. (5) (1995) 203-207

  525. V.V. Zakharov: Industrial Aluminum Alloys with Scandium Additive, Met. Sci. & Heat Tr. (7) (1995) 283-285

  526. V.V. Zakharov and T.D. Rostova: Shear Bands in Aluminum Alloys Containing Scandium and Lithium, Met. Sci. & Heat Tr. (4) (1996) 163-167

  527. V.V. Zakharov: Stability of the Solid Solution of Scandium in Aluminum, Met. Sci. & Heat Tr. (2) (1997) 61-66

  528. V.V. Zakharov and T.D. Rostova: Mechanical Anisotropy in Scandium-Bearing Aluminum Alloy Sheets, Alum. Trans. 2 (2000) 329-335
    Abstract

  529. I.I. Zalutskii and P.I. Kripyakevich: RAl3 Compounds in Rare Earth-Aluminum Systems and their Crystal Structures, Sov. Phys. Crystall. 12 (1967) 341-343

  530. V.M. Zamyatin et al.: Surface Tension and Density Polytherms for Molten Aluminium Alloyed with Titanium, Scandium and Iron, Sov. Non-Ferrous Met. Res. 14 (1986) 140-143

  531. H. Zhang, H. Uochi, S. Yamazaki, Y. Takemura, M. Miyazaki, A. Murakami, T. Konuma, A. Sugawara and Y. Uehara: Process for Fabricating Electronic Circuits with Anodically Oxidized Scandium Doped Aluminum Wiring, US Patent 5 830 786, Nov. 3 1998

  532. J. Zhang, Z. Yin, Y. Zhang, Y. Gao and Q. Pan: Microstructure of Differently Treated Al-Mg-Sc-Zr Alloys, J. Cent. South Univ. Technol. 4 (1) (1997) 24-27

  533. E. Zschech: Metallkundliche Prozesse bei der Wärmebehandlung Aushärtbarer Aluminiumlegierungen, Härterei-Technische Mitteilungen 51 (3) (1996) 137-144